Convert CONFIG_BOOTP_BOOTPATH et al to Kconfig

[people/ms/u-boot.git] / include / configs / stm32f746-disco.h

diff --git a/include/configs/stm32f746-disco.h b/include/configs/stm32f746-disco.h
index 807ab6574eb5144b38ee10e79833caa5ae5f7f56..801980ea3388d2d1742f9392ebf585ec284360e9 100644 (file)
--- a/include/configs/stm32f746-disco.h
+++ b/include/configs/stm32f746-disco.h
@@ -1,6 +1,6 @@
 /*
- * (C) Copyright 2016
- * Vikas Manocha, <vikas.manocha@st.com>
+ * Copyright (C) 2016, STMicroelectronics - All Rights Reserved
+ * Author(s): Vikas Manocha, <vikas.manocha@st.com> for STMicroelectronics.
  *
  * SPDX-License-Identifier:    GPL-2.0+
  */
@@ -8,42 +8,34 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#define CONFIG_SYS_THUMB_BUILD
-/*#define CONFIG_SYS_NO_FLASH*/
-
-#define CONFIG_OF_LIBFDT
-#define CONFIG_BOARD_EARLY_INIT_F
-
 #define CONFIG_SYS_FLASH_BASE          0x08000000
 #define CONFIG_SYS_INIT_SP_ADDR                0x20050000
-#define CONFIG_SYS_TEXT_BASE           0x08000000
 
-#define CONFIG_SYS_ICACHE_OFF
-#define CONFIG_SYS_DCACHE_OFF
+#ifdef CONFIG_SUPPORT_SPL
+#define CONFIG_SYS_LOAD_ADDR           0x08008000
+#else
+#define CONFIG_SYS_LOAD_ADDR           0xC0400000
+#define CONFIG_LOADADDR                        0xC0400000
+#endif
 
 /*
  * Configuration of the external SDRAM memory
  */
 #define CONFIG_NR_DRAM_BANKS           1
-#define CONFIG_SYS_RAM_SIZE            ((64 + 192) << 10)
-#define CONFIG_SYS_RAM_CS              1
-#define CONFIG_SYS_RAM_FREQ_DIV                2
-#define CONFIG_SYS_RAM_BASE            0x20000000
-#define CONFIG_SYS_SDRAM_BASE          CONFIG_SYS_RAM_BASE
-#define CONFIG_SYS_LOAD_ADDR           0x20000000
-#define CONFIG_LOADADDR                        0x20000000
 
 #define CONFIG_SYS_MAX_FLASH_SECT      8
 #define CONFIG_SYS_MAX_FLASH_BANKS     1
 
-#define CONFIG_ENV_IS_NOWHERE
 #define CONFIG_ENV_SIZE                        (8 << 10)
 
-#define CONFIG_STM32_GPIO
 #define CONFIG_STM32_FLASH
-#define CONFIG_STM32X7_SERIAL
 
-#define CONFIG_SYS_CLK_FREQ            16*1000*1000 /* 180 MHz */
+#define CONFIG_DW_GMAC_DEFAULT_DMA_PBL (8)
+#define CONFIG_DW_ALTDESCRIPTOR
+#define CONFIG_MII
+#define CONFIG_PHY_SMSC
+
+#define CONFIG_SYS_CLK_FREQ            200000000 /* 200 MHz */
 #define CONFIG_SYS_HZ_CLOCK            1000000 /* Timer is clocked at 1MHz */
 
 #define CONFIG_CMDLINE_TAG
@@ -52,16 +44,9 @@
 #define CONFIG_REVISION_TAG
 
 #define CONFIG_SYS_CBSIZE              1024
-#define CONFIG_SYS_PBSIZE              (CONFIG_SYS_CBSIZE \
-                                       + sizeof(CONFIG_SYS_PROMPT) + 16)
 
-#define CONFIG_SYS_MAXARGS             16
-#define CONFIG_SYS_MALLOC_LEN          (16 * 1024)
-#define CONFIG_STACKSIZE               (64 << 10)
+#define CONFIG_SYS_MALLOC_LEN          (1 * 1024 * 1024)
 
-#define CONFIG_BAUDRATE                        115200
-#define CONFIG_BOOTARGS                                                        \
-       "console=ttyS0,115200 earlyprintk consoleblank=0 ignore_loglevel"
 #define CONFIG_BOOTCOMMAND                                             \
        "run bootcmd_romfs"
 
@@ -70,17 +55,28 @@
        "bootcmd_romfs=setenv bootargs ${bootargs} ${bootargs_romfs};" \
        "bootm 0x08044000 - 0x08042000\0"
 
-#define CONFIG_BOOTDELAY               3
 
 /*
  * Command line configuration.
  */
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_AUTO_COMPLETE
-#define CONFIG_CMDLINE_EDITING
-
-#define CONFIG_CMD_MEM
-#define CONFIG_CMD_TIMER
-#undef CONFIG_CMD_IMLS
+#define CONFIG_CMD_CACHE
+#define CONFIG_BOARD_LATE_INIT
+#define CONFIG_DISPLAY_BOARDINFO
+
+/* For SPL */
+#ifdef CONFIG_SUPPORT_SPL
+#define CONFIG_SPL_STACK               CONFIG_SYS_INIT_SP_ADDR
+#define CONFIG_SPL_TEXT_BASE           CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_MONITOR_LEN         (512 * 1024)
+#define CONFIG_SYS_SPL_LEN             0x00008000
+#define CONFIG_SYS_UBOOT_START         0x080083FD
+#define CONFIG_SYS_UBOOT_BASE          (CONFIG_SYS_FLASH_BASE + \
+                                        CONFIG_SYS_SPL_LEN)
+
+/* DT blob (fdt) address */
+#define CONFIG_SYS_FDT_BASE            (CONFIG_SYS_FLASH_BASE + \
+                                       0x1C0000)
+#endif
+/* For SPL ends */
+
 #endif /* __CONFIG_H */