common: Add DISPLAY_BOARDINFO

[people/ms/u-boot.git] / include / configs / sunxi-common.h

diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h
index f64edd4b0fe0aba46bd07e632583c7a0b75c76a3..33f2ab7a1f9f1df716756e4510c7fdd2ed349aec 100644 (file)
--- a/include/configs/sunxi-common.h
+++ b/include/configs/sunxi-common.h
@@ -54,7 +54,6 @@
 #endif
 
 /* CPU */
-#define CONFIG_DISPLAY_CPUINFO
 #define CONFIG_TIMER_CLK_FREQ          24000000
 
 /*
@@ -99,7 +98,7 @@
  * the 1 actually activates the mapping of the first 32 KiB to 0x00000000.
  */
 #define CONFIG_SYS_INIT_RAM_ADDR       0x10000
-#define CONFIG_SYS_INIT_RAM_SIZE       0xA000  /* 40 KiB */
+#define CONFIG_SYS_INIT_RAM_SIZE       0x08000 /* FIXME: 40 KiB ? */
 #else
 #define CONFIG_SYS_INIT_RAM_ADDR       0x0
 #define CONFIG_SYS_INIT_RAM_SIZE       0x8000  /* 32 KiB */
@@ -134,13 +133,11 @@
 
 #ifdef CONFIG_NAND_SUNXI
 #define CONFIG_SYS_NAND_MAX_ECCPOS 1664
-#define CONFIG_SPL_NAND_SUPPORT 1
 #define CONFIG_SYS_NAND_ONFI_DETECTION
 #define CONFIG_SYS_MAX_NAND_DEVICE 8
 #endif
 
 #ifdef CONFIG_SPL_SPI_SUNXI
-#define CONFIG_SPL_SPI_FLASH_SUPPORT   1
 #define CONFIG_SYS_SPI_U_BOOT_OFFS     0x8000
 #endif
 
@@ -180,8 +177,6 @@
 #define CONFIG_SYS_NO_FLASH
 
 #define CONFIG_SYS_MONITOR_LEN         (768 << 10)     /* 768 KiB */
-#define CONFIG_IDENT_STRING            " Allwinner Technology"
-#define CONFIG_DISPLAY_BOARDINFO
 
 #define CONFIG_ENV_OFFSET              (544 << 10) /* (8 + 24 + 512) KiB */
 #define CONFIG_ENV_SIZE                        (128 << 10)     /* 128 KiB */
@@ -189,9 +184,6 @@
 #define CONFIG_FAT_WRITE       /* enable write access */
 
 #define CONFIG_SPL_FRAMEWORK
-#define CONFIG_SPL_LIBCOMMON_SUPPORT
-#define CONFIG_SPL_SERIAL_SUPPORT
-#define CONFIG_SPL_LIBGENERIC_SUPPORT
 
 #define CONFIG_SPL_BOARD_LOAD_IMAGE
 
@@ -206,12 +198,6 @@
 #define CONFIG_SPL_MAX_SIZE            0x5fc0          /* 24KB on sun4i/sun7i */
 #endif
 
-#define CONFIG_SPL_LIBDISK_SUPPORT
-
-#ifdef CONFIG_MMC
-#define CONFIG_SPL_MMC_SUPPORT
-#endif
-
 #ifndef CONFIG_ARM64
 #define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv7/sunxi/u-boot-spl.lds"
 #endif
@@ -220,7 +206,8 @@
 #define CONFIG_SPL_PAD_TO              32768           /* decimal for 'dd' */
 
 #if defined(CONFIG_MACH_SUN9I) || defined(CONFIG_MACH_SUN50I)
-#define LOW_LEVEL_SRAM_STACK           0x0001A000
+/* FIXME: 40 KiB instead of 32 KiB ? */
+#define LOW_LEVEL_SRAM_STACK           0x00018000
 #define CONFIG_SPL_STACK               LOW_LEVEL_SRAM_STACK
 #else
 /* end of 32 KiB in sram */
@@ -231,7 +218,6 @@
 /* I2C */
 #if defined CONFIG_AXP152_POWER || defined CONFIG_AXP209_POWER || \
     defined CONFIG_SY8106A_POWER
-#define CONFIG_SPL_I2C_SUPPORT
 #endif
 
 #if defined CONFIG_I2C0_ENABLE || defined CONFIG_I2C1_ENABLE || \
@@ -265,7 +251,6 @@ extern int soft_i2c_gpio_scl;
 #if defined CONFIG_AXP152_POWER || defined CONFIG_AXP209_POWER || \
     defined CONFIG_AXP221_POWER || defined CONFIG_AXP818_POWER || \
     defined CONFIG_SY8106A_POWER
-#define CONFIG_SPL_POWER_SUPPORT
 #endif
 
 #ifndef CONFIG_CONS_INDEX
@@ -292,7 +277,6 @@ extern int soft_i2c_gpio_scl;
 
 /* GPIO */
 #define CONFIG_SUNXI_GPIO
-#define CONFIG_SPL_GPIO_SUPPORT
 
 #ifdef CONFIG_VIDEO
 /*
@@ -346,15 +330,10 @@ extern int soft_i2c_gpio_scl;
 #endif
 
 #ifdef CONFIG_USB_MUSB_GADGET
-#define CONFIG_USB_FUNCTION_DFU
 #define CONFIG_USB_FUNCTION_FASTBOOT
 #define CONFIG_USB_FUNCTION_MASS_STORAGE
 #endif
 
-#ifdef CONFIG_USB_FUNCTION_DFU
-#define CONFIG_DFU_RAM
-#endif
-
 #ifdef CONFIG_USB_FUNCTION_FASTBOOT
 #define CONFIG_CMD_FASTBOOT
 #define CONFIG_FASTBOOT_BUF_ADDR       CONFIG_SYS_LOAD_ADDR