configs: Finish migration of PHY_GIGE

[people/ms/u-boot.git] / include / configs / t4qds.h

diff --git a/include/configs/t4qds.h b/include/configs/t4qds.h
index 61ef25ac70cb91ce335df2894dd25f251f6ea9b9..99c0602503e38af3cfcb4da3dde5b84fbd4531b0 100644 (file)
--- a/include/configs/t4qds.h
+++ b/include/configs/t4qds.h
@@ -13,9 +13,6 @@
 #define CONFIG_CMD_REGINFO
 
 /* High Level Configuration Options */
-#define CONFIG_BOOKE
-#define CONFIG_E500                    /* BOOKE e500 family */
-#define CONFIG_E500MC                  /* BOOKE e500mc family */
 #define CONFIG_SYS_BOOK3E_HV           /* Category E.HV supported */
 #define CONFIG_MP                      /* support multiple processors */
 
@@ -28,9 +25,7 @@
 #endif
 
 #define CONFIG_SYS_FSL_CPC             /* Corenet Platform Cache */
-#define CONFIG_SYS_NUM_CPC             CONFIG_NUM_DDR_CONTROLLERS
-#define CONFIG_FSL_IFC                 /* Enable IFC Support */
-#define CONFIG_PCI                     /* Enable PCI/PCIE */
+#define CONFIG_SYS_NUM_CPC             CONFIG_SYS_NUM_DDR_CTLRS
 #define CONFIG_PCIE1                   /* PCIE controller 1 */
 #define CONFIG_PCIE2                   /* PCIE controller 2 */
 #define CONFIG_PCIE3                   /* PCIE controller 3 */
@@ -41,8 +36,6 @@
 #define CONFIG_SRIO1                   /* SRIO port 1 */
 #define CONFIG_SRIO2                   /* SRIO port 2 */
 
-#define CONFIG_FSL_LAW                 /* Use common FSL init code */
-
 #define CONFIG_ENV_OVERWRITE
 
 /*
@@ -89,13 +82,11 @@
 #define CONFIG_SYS_DDR_SDRAM_BASE      0x00000000
 #define CONFIG_SYS_SDRAM_BASE          CONFIG_SYS_DDR_SDRAM_BASE
 
-/* CONFIG_NUM_DDR_CONTROLLERS is defined in include/asm/config_mpc85xx.h */
 #define CONFIG_DIMM_SLOTS_PER_CTLR     2
 #define CONFIG_CHIP_SELECTS_PER_CTRL   4
 #define CONFIG_FSL_DDR_FIRST_SLOT_QUAD_CAPABLE
 
 #define CONFIG_DDR_SPD
-#define CONFIG_SYS_FSL_DDR3
 
 /*
  * IFC Definitions
@@ -214,10 +205,8 @@
 
 #ifdef CONFIG_PCI
 #define CONFIG_PCI_INDIRECT_BRIDGE
-#define CONFIG_PCI_PNP                 /* do pci plug-and-play */
 
 #define CONFIG_PCI_SCAN_SHOW           /* show pci devices on startup */
-#define CONFIG_DOS_PARTITION
 #endif /* CONFIG_PCI */
 
 /* SATA */
@@ -234,14 +223,11 @@
 #define CONFIG_SYS_SATA2_FLAGS         FLAGS_DMA
 
 #define CONFIG_LBA48
-#define CONFIG_CMD_SATA
-#define CONFIG_DOS_PARTITION
 #endif
 
 #ifdef CONFIG_FMAN_ENET
 #define CONFIG_MII             /* MII PHY management */
 #define CONFIG_ETHPRIME                "FM1@DTSEC1"
-#define CONFIG_PHY_GIGE                /* Include GbE speed/duplex detection */
 #endif
 
 /*
@@ -253,8 +239,6 @@
 /*
  * Command line configuration.
  */
-#define CONFIG_CMD_ERRATA
-#define CONFIG_CMD_IRQ
 
 #ifdef CONFIG_PCI
 #define CONFIG_CMD_PCI
@@ -298,8 +282,6 @@
 /* default location for tftp and bootm */
 #define CONFIG_LOADADDR                1000000
 
-#define CONFIG_BAUDRATE        115200
-
 #define CONFIG_HVBOOT                          \
  "setenv bootargs config-addr=0x60000000; "    \
  "bootm 0x01000000 - 0x00f00000"