configs: Re-sync HUSH options

[people/ms/u-boot.git] / include / configs / tam3517-common.h

diff --git a/include/configs/tam3517-common.h b/include/configs/tam3517-common.h
index d44b5c036de2a80ed1d1462c2919525f85314f5a..1426fbf6328cfc3345f12fef6ffbe114af673b9a 100644 (file)
--- a/include/configs/tam3517-common.h
+++ b/include/configs/tam3517-common.h
@@ -14,9 +14,12 @@
  * High Level Configuration Options
  */
 #define CONFIG_OMAP            /* in a TI OMAP core */
-#define CONFIG_OMAP34XX                /* which is a 34XX */
 #define CONFIG_OMAP_GPIO
 #define CONFIG_OMAP_COMMON
+/* Common ARM Erratas */
+#define CONFIG_ARM_ERRATA_454179
+#define CONFIG_ARM_ERRATA_430973
+#define CONFIG_ARM_ERRATA_621766
 
 #define CONFIG_SYS_TEXT_BASE 0x80008000
 
@@ -25,7 +28,7 @@
 #define CONFIG_EMIF4   /* The chip has EMIF4 controller */
 
 #include <asm/arch/cpu.h>              /* get chip and board defs */
-#include <asm/arch/omap3.h>
+#include <asm/arch/omap.h>
 
 /*
  * Display CPU and Board information
@@ -63,7 +66,6 @@
 /*
  * NS16550 Configuration
  */
-#define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE    (-4)
 #define CONFIG_SYS_NS16550_CLK         48000000        /* 48MHz (APLL96/2) */
@@ -89,33 +91,23 @@
 #define CONFIG_OMAP3_GPIO_5
 #define CONFIG_USB_EHCI
 #define CONFIG_USB_EHCI_OMAP
-#define CONFIG_USB_ULPI
-#define CONFIG_USB_ULPI_VIEWPORT_OMAP
 #define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO       25
 #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
 #define CONFIG_USB_STORAGE
 
 /* commands to include */
-#include <config_cmd_default.h>
-
 #define CONFIG_CMD_CACHE
 #define CONFIG_CMD_DHCP
 #define CONFIG_CMD_EXT2                /* EXT2 Support                 */
 #define CONFIG_CMD_FAT         /* FAT support                  */
-#define CONFIG_CMD_GPIO
 #define CONFIG_CMD_I2C         /* I2C serial bus support       */
 #define CONFIG_CMD_MII
 #define CONFIG_CMD_MMC         /* MMC support                  */
-#define CONFIG_CMD_NET
-#define CONFIG_CMD_NFS
 #define CONFIG_CMD_NAND                /* NAND support                 */
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_USB
 #define CONFIG_CMD_EEPROM
 
-#undef CONFIG_CMD_FLASH                /* only NAND on the SOM */
-#undef CONFIG_CMD_IMLS
-
 #define CONFIG_SYS_NO_FLASH
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_OMAP24_I2C_SPEED    400000
@@ -141,7 +133,6 @@
  * Miscellaneous configurable options
  */
 #define CONFIG_SYS_LONGHELP            /* undef to save memory */
-#define CONFIG_SYS_HUSH_PARSER         /* use "hush" command parser */
 #define CONFIG_CMDLINE_EDITING
 #define CONFIG_AUTO_COMPLETE
 #define CONFIG_SYS_CBSIZE              512     /* Console I/O Buffer Size */
@@ -181,12 +172,8 @@
  */
 
 /* **** PISMO SUPPORT *** */
-
-/* Configure the PISMO */
-#define PISMO1_NAND_SIZE               GPMC_SIZE_128M
-
+#define CONFIG_NAND
 #define CONFIG_NAND_OMAP_GPMC
-#define GPMC_NAND_ECC_LP_x16_LAYOUT
 #define CONFIG_ENV_IS_IN_NAND
 #define SMNAND_ENV_OFFSET              0x180000 /* environment starts here */
 
@@ -219,7 +206,6 @@
 #define CONFIG_NET_RETRY_COUNT 10
 
 /* Defines for SPL */
-#define CONFIG_SPL
 #define CONFIG_SPL_FRAMEWORK
 #define CONFIG_SPL_BOARD_INIT
 #define CONFIG_SPL_CONSOLE
@@ -242,7 +228,6 @@
 
 #define CONFIG_SPL_TEXT_BASE           0x40200000 /*CONFIG_SYS_SRAM_START*/
 #define CONFIG_SPL_MAX_SIZE            (54 * 1024)     /* 8 KB for stack */
-#define CONFIG_SPL_STACK               LOW_LEVEL_SRAM_STACK
 
 #define CONFIG_SYS_SPL_MALLOC_START    0x8f000000
 #define CONFIG_SYS_SPL_MALLOC_SIZE     0x80000
@@ -250,6 +235,7 @@
 #define CONFIG_SPL_BSS_MAX_SIZE                0x80000
 
 /* NAND boot config */
+#define CONFIG_SYS_NAND_BUSWIDTH_16BIT
 #define CONFIG_SYS_NAND_PAGE_COUNT     64
 #define CONFIG_SYS_NAND_PAGE_SIZE      2048
 #define CONFIG_SYS_NAND_OOBSIZE                64
@@ -262,14 +248,13 @@
 #define CONFIG_SYS_NAND_ECCSIZE                256
 #define CONFIG_SYS_NAND_ECCBYTES       3
 #define CONFIG_NAND_OMAP_ECCSCHEME     OMAP_ECC_HAM1_CODE_SW
+#define CONFIG_NAND_OMAP_GPMC_PREFETCH
 
 #define CONFIG_SYS_NAND_U_BOOT_START   CONFIG_SYS_TEXT_BASE
 
 #define CONFIG_SYS_NAND_U_BOOT_OFFS    0x80000
 #define CONFIG_SYS_NAND_U_BOOT_SIZE    0x80000
 
-#define CONFIG_OF_LIBFDT
-#define CONFIG_FIT
 #define CONFIG_CMD_UBI
 #define CONFIG_CMD_UBIFS
 #define CONFIG_RBTREE
@@ -394,7 +379,7 @@ do {                                                                \
                if (i)                                          \
                        sprintf(ethname, "eth%daddr", i);       \
                else                                            \
-                       sprintf(ethname, "ethaddr");            \
+                       strcpy(ethname, "ethaddr");             \
                printf("Setting %s from EEPROM with %s\n", ethname, buf);\
                setenv(ethname, buf);                           \
        }                                                       \