Convert CONFIG_SPL_BOARD_INIT to Kconfig

[people/ms/u-boot.git] / include / configs / tam3517-common.h

diff --git a/include/configs/tam3517-common.h b/include/configs/tam3517-common.h
index c0e92c556be9f80b925a0a3cacf1855ab85dd66a..ebb716ca889a815b778a6301cbe20a3aa4361861 100644 (file)
--- a/include/configs/tam3517-common.h
+++ b/include/configs/tam3517-common.h
@@ -13,13 +13,6 @@
 /*
  * High Level Configuration Options
  */
-#define CONFIG_OMAP            /* in a TI OMAP core */
-#define CONFIG_OMAP_GPIO
-#define CONFIG_OMAP_COMMON
-/* Common ARM Erratas */
-#define CONFIG_ARM_ERRATA_454179
-#define CONFIG_ARM_ERRATA_430973
-#define CONFIG_ARM_ERRATA_621766
 
 #define CONFIG_SYS_TEXT_BASE 0x80008000
 
@@ -28,12 +21,6 @@
 #include <asm/arch/cpu.h>              /* get chip and board defs */
 #include <asm/arch/omap.h>
 
-/*
- * Display CPU and Board information
- */
-#define CONFIG_DISPLAY_CPUINFO
-#define CONFIG_DISPLAY_BOARDINFO
-
 /* Clock Defines */
 #define V_OSCK                 26000000        /* Clock output from T2 */
 #define V_SCLK                 (V_OSCK >> 1)
@@ -54,7 +41,6 @@
 /*
  * DDR related
  */
-#define CONFIG_OMAP3_MICRON_DDR                /* Micron DDR */
 #define CONFIG_SYS_CS0_SIZE            (256 * 1024 * 1024)
 
 /*
@@ -77,18 +63,9 @@
 
 /* allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
-#define CONFIG_BAUDRATE                        115200
 #define CONFIG_SYS_BAUDRATE_TABLE      {4800, 9600, 19200, 38400, 57600,\
                                        115200}
-#define CONFIG_MMC
-#define CONFIG_OMAP_HSMMC
-#define CONFIG_GENERIC_MMC
-#define CONFIG_DOS_PARTITION
-
 /* EHCI */
-#define CONFIG_OMAP3_GPIO_5
-#define CONFIG_USB_EHCI
-#define CONFIG_USB_EHCI_OMAP
 #define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO       25
 #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
 
@@ -96,7 +73,6 @@
 #define CONFIG_CMD_NAND                /* NAND support                 */
 #define CONFIG_CMD_EEPROM
 
-#define CONFIG_SYS_NO_FLASH
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_OMAP24_I2C_SPEED    400000
 #define CONFIG_SYS_OMAP24_I2C_SLAVE    1
@@ -187,7 +163,6 @@
 #define CONFIG_DRIVER_TI_EMAC
 #define CONFIG_DRIVER_TI_EMAC_USE_RMII
 #define CONFIG_MII
-#define CONFIG_EMAC_MDIO_PHY_NUM       0
 #define CONFIG_BOOTP_DNS
 #define CONFIG_BOOTP_DNS2
 #define CONFIG_BOOTP_SEND_HOSTNAME
@@ -195,19 +170,15 @@
 
 /* Defines for SPL */
 #define CONFIG_SPL_FRAMEWORK
-#define CONFIG_SPL_BOARD_INIT
 #define CONFIG_SPL_CONSOLE
 #define CONFIG_SPL_NAND_SIMPLE
 #define CONFIG_SPL_NAND_SOFTECC
 #define CONFIG_SPL_NAND_WORKSPACE      0x8f07f000 /* below BSS */
 
-#define CONFIG_SPL_SERIAL_SUPPORT
-#define CONFIG_SPL_POWER_SUPPORT
-#define CONFIG_SPL_NAND_SUPPORT
 #define CONFIG_SPL_NAND_BASE
 #define CONFIG_SPL_NAND_DRIVERS
 #define CONFIG_SPL_NAND_ECC
-#define CONFIG_SPL_LDSCRIPT            "$(CPUDIR)/omap-common/u-boot-spl.lds"
+#define CONFIG_SPL_LDSCRIPT            "arch/arm/mach-omap2/u-boot-spl.lds"
 
 #define CONFIG_SPL_TEXT_BASE           0x40200000 /*CONFIG_SYS_SRAM_START*/
 #define CONFIG_SPL_MAX_SIZE            (SRAM_SCRATCH_SPACE_ADDR - \
@@ -219,7 +190,6 @@
 #define CONFIG_SPL_BSS_START_ADDR      0x8f080000 /* end of RAM */
 #define CONFIG_SPL_BSS_MAX_SIZE                0x80000
 
-#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR        0x300 /* address 0x60000 */
 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION     1
 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME                "u-boot.img"
 
@@ -253,7 +223,6 @@
 #define CONFIG_SYS_NAND_U_BOOT_OFFS    0x80000
 #define CONFIG_SYS_NAND_U_BOOT_SIZE    0x80000
 
-#define CONFIG_CMD_UBI
 #define CONFIG_CMD_UBIFS
 #define CONFIG_RBTREE
 #define CONFIG_LZO