Move CONFIG_OF_LIBFDT to Kconfig

[people/ms/u-boot.git] / include / configs / tao3530.h

diff --git a/include/configs/tao3530.h b/include/configs/tao3530.h
index a160329c1d71d39c797e44af03fb46c20ee0c728..73cd0a028b67ecd3f333785307c4900097252ef8 100644 (file)
--- a/include/configs/tao3530.h
+++ b/include/configs/tao3530.h
@@ -13,6 +13,8 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#define CONFIG_SYS_CACHELINE_SIZE      64
+
 /*
  * High Level Configuration Options
  */
@@ -20,14 +22,17 @@
 
 #define CONFIG_OMAP_GPIO
 #define CONFIG_OMAP_COMMON
-#define CONFIG_SYS_GENERIC_BOARD
+/* Common ARM Erratas */
+#define CONFIG_ARM_ERRATA_454179
+#define CONFIG_ARM_ERRATA_430973
+#define CONFIG_ARM_ERRATA_621766
 
 #define MACH_TYPE_OMAP3_TAO3530                2836
 
 #define CONFIG_SDRC                    /* Has an SDRC controller */
 
 #include <asm/arch/cpu.h>              /* get chip and board defs */
-#include <asm/arch/omap3.h>
+#include <asm/arch/omap.h>
 
 /*
  * Display CPU and Board information
@@ -41,8 +46,6 @@
 
 #define CONFIG_MISC_INIT_R
 
-#define CONFIG_OF_LIBFDT
-
 #define CONFIG_CMDLINE_TAG
 #define CONFIG_SETUP_MEMORY_TAGS
 #define CONFIG_INITRD_TAG
@@ -63,7 +66,6 @@
  */
 #define V_NS16550_CLK                  48000000        /* 48MHz (APLL96/2) */
 
-#define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE    (-4)
 #define CONFIG_SYS_NS16550_CLK         V_NS16550_CLK
@@ -90,8 +92,6 @@
 #define CONFIG_OMAP3_GPIO_6            /* GPIO160..191 is in GPIO bank 6 */
 
 /* commands to include */
-#include <config_cmd_default.h>
-
 #define CONFIG_CMD_CACHE
 #define CONFIG_CMD_EXT2                /* EXT2 Support                 */
 #define CONFIG_CMD_FAT         /* FAT support                  */
@@ -108,11 +108,6 @@
 #define CONFIG_CMD_DHCP
 #define CONFIG_CMD_PING
 
-#undef CONFIG_CMD_FLASH                /* flinfo, erase, protect       */
-#undef CONFIG_CMD_FPGA         /* FPGA configuration Support   */
-#undef CONFIG_CMD_IMI          /* iminfo                       */
-#undef CONFIG_CMD_IMLS         /* List all found images        */
-
 #define CONFIG_SYS_NO_FLASH
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_OMAP34XX
@@ -129,7 +124,6 @@
 /*
  * Board NAND Info.
  */
-#define CONFIG_SYS_NAND_QUIET_TEST
 #define CONFIG_NAND_OMAP_GPMC
 #define CONFIG_SYS_NAND_ADDR           NAND_BASE       /* physical address */
                                                        /* to access nand */
@@ -139,7 +133,7 @@
 
 #define CONFIG_SYS_MAX_NAND_DEVICE     1               /* Max number of NAND */
                                                        /* devices */
-#define CONFIG_SYS_NAND_BUSWIDTH_16BIT 16
+#define CONFIG_SYS_NAND_BUSWIDTH_16BIT
 /* Environment information */
 #define CONFIG_BOOTDELAY               3
 
@@ -199,7 +193,6 @@
  */
 #define CONFIG_SYS_LONGHELP            /* undef to save memory */
 #define CONFIG_SYS_HUSH_PARSER         /* use "hush" command parser */
-#define CONFIG_SYS_PROMPT              "TAO-3530 # "
 #define CONFIG_SYS_CBSIZE              256     /* Console I/O Buffer Size */
 
 /* turn on command-line edit/hist/auto */
@@ -304,7 +297,7 @@
 
 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR        0x300 /* address 0x60000 */
 #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS     0x200 /* 256 KB */
-#define CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION    1
+#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION     1
 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME        "u-boot.img"
 
 #define CONFIG_SPL_BOARD_INIT
@@ -346,7 +339,6 @@
 
 #define CONFIG_SPL_TEXT_BASE           0x40200800
 #define CONFIG_SPL_MAX_SIZE            (54 * 1024)     /* 8 KB for stack */
-#define CONFIG_SPL_STACK               LOW_LEVEL_SRAM_STACK
 
 /*
  * Use 0x80008000 as TEXT_BASE here for compatibility reasons with the