configs: Migrate RBTREE, LZO, CMD_MTDPARTS, CMD_UBI and CMD_UBIFS

[people/ms/u-boot.git] / include / configs / taurus.h

diff --git a/include/configs/taurus.h b/include/configs/taurus.h
index 422b7a1722951436b62c9442b6f71df75717fb7e..e03731b9b93e6723e1328d062a9dd9a2c48a9ad2 100644 (file)
--- a/include/configs/taurus.h
+++ b/include/configs/taurus.h
@@ -22,9 +22,7 @@
 #include <asm/hardware.h>
 #include <linux/sizes.h>
 
-
 #if defined(CONFIG_SPL_BUILD)
-#define CONFIG_SYS_THUMB_BUILD
 #define CONFIG_SYS_ICACHE_OFF
 #define CONFIG_SYS_DCACHE_OFF
 #endif
@@ -35,7 +33,6 @@
  * hex number here!
  */
 
-
 #define CONFIG_SYS_TEXT_BASE           0x21000000
 
 /* ARM asynchronous clock */
@@ -47,11 +44,7 @@
 #define CONFIG_CMDLINE_TAG             /* enable passing of ATAGs */
 #define CONFIG_SETUP_MEMORY_TAGS
 #define CONFIG_INITRD_TAG
-#define CONFIG_SKIP_LOWLEVEL_INIT
-#define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_DISPLAY_CPUINFO
-
-#define CONFIG_CMD_BOOTZ
+#define CONFIG_SKIP_LOWLEVEL_INIT_ONLY
 
 /* general purpose I/O */
 #define CONFIG_ATMEL_LEGACY            /* required until (g)pio is fixed */
@@ -62,15 +55,11 @@
 #define CONFIG_ATMEL_USART
 #define CONFIG_USART_BASE              ATMEL_BASE_DBGU
 #define CONFIG_USART_ID                        ATMEL_ID_SYS
-#define CONFIG_BAUDRATE                        115200
 
-#define CONFIG_BOOTDELAY       3
 
 /*
  * Command line configuration.
  */
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_DHCP
 #define CONFIG_CMD_NAND
 
 /*
@@ -101,11 +90,9 @@
 #define CONFIG_SYS_NAND_READY_PIN      AT91_PIN_PC13
 #endif
 
-/* NOR flash - no real flash on this board */
-#define CONFIG_SYS_NO_FLASH                    1
-
 /* Ethernet */
 #define CONFIG_MACB
+#define CONFIG_PHYLIB
 #define CONFIG_RMII
 #define CONFIG_AT91_WANTS_COMMON_PHY
 
@@ -125,44 +112,26 @@
 #define CONFIG_SYS_USB_OHCI_REGS_BASE          0x00500000
 #define CONFIG_SYS_USB_OHCI_SLOT_NAME          "at91sam9260"
 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS     2
-#define CONFIG_USB_STORAGE
 
 /* USB DFU support */
-#define CONFIG_CMD_MTDPARTS
 #define CONFIG_MTD_DEVICE
 #define CONFIG_MTD_PARTITIONS
 
 #define CONFIG_USB_GADGET_AT91
 
 /* DFU class support */
-#define CONFIG_CMD_USB
-#define CONFIG_CMD_DFU
-#define CONFIG_USB_FUNCTION_DFU
-#define CONFIG_DFU_NAND
 #define CONFIG_SYS_DFU_DATA_BUF_SIZE   (SZ_1M)
 #define DFU_MANIFEST_POLL_TIMEOUT      25000
-
-/* USB DFU IDs */
-#define CONFIG_G_DNL_VENDOR_NUM 0x0908
-#define CONFIG_G_DNL_PRODUCT_NUM 0x02d2
-#define CONFIG_G_DNL_MANUFACTURER "Siemens AG"
-
-#define CONFIG_SYS_CACHELINE_SIZE      SZ_8K
 #endif
 
 /* SPI EEPROM */
 #define CONFIG_SPI
-#define CONFIG_CMD_SPI
-#define CONFIG_CMD_SF
 #define CONFIG_ATMEL_SPI
 #define TAURUS_SPI_MASK (1 << 4)
 #define TAURUS_SPI_CS_PIN      AT91_PIN_PA3
 
 #if defined(CONFIG_SPL_BUILD)
 /* SPL related */
-#undef CONFIG_SPL_OS_BOOT              /* Not supported by existing map */
-#define CONFIG_SPL_SPI_SUPPORT
-#define CONFIG_SPL_SPI_FLASH_SUPPORT
 #define CONFIG_SPL_SPI_LOAD
 #define CONFIG_SYS_SPI_U_BOOT_OFFS     0x20000
 
@@ -276,14 +245,7 @@
 #define CONFIG_SPL_BSS_START_ADDR      CONFIG_SPL_MAX_SIZE
 #define CONFIG_SPL_BSS_MAX_SIZE                (3 * SZ_512)
 
-#define CONFIG_SPL_LIBCOMMON_SUPPORT
-#define CONFIG_SPL_LIBGENERIC_SUPPORT
-#define CONFIG_SPL_SERIAL_SUPPORT
-
-#define CONFIG_SPL_BOARD_INIT
-#define CONFIG_SPL_GPIO_SUPPORT
 #define CONFIG_SYS_NAND_ENABLE_PIN_SPL (2*32 + 14)
-#define CONFIG_SPL_NAND_SUPPORT
 #define CONFIG_SYS_USE_NANDFLASH       1
 #define CONFIG_SPL_NAND_DRIVERS
 #define CONFIG_SPL_NAND_BASE
@@ -309,7 +271,6 @@
                                          48, 49, 50, 51, 52, 53, 54, 55, \
                                          56, 57, 58, 59, 60, 61, 62, 63, }
 
-
 #define CONFIG_SPL_ATMEL_SIZE
 #define CONFIG_SYS_MASTER_CLOCK                132096000
 #define AT91_PLL_LOCK_TIMEOUT          1000000