#define CONFIG_MACH_TYPE 3980
#define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_MXC_GPIO
-#define CONFIG_CMD_GPIO
-
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT "Matrix U-Boot> "
-#define CONFIG_BOOTDELAY 3
-#define CONFIG_AUTO_COMPLETE
-#define CONFIG_CMDLINE_EDITING
-#define CONFIG_SYS_MAXARGS 16
-#define CONFIG_SYS_CBSIZE 1024
+
#define CONFIG_SYS_HZ 1000
+#define CONFIG_IMX_THERMAL
+
/* Physical Memory Map */
#define CONFIG_NR_DRAM_BANKS 1
#define CONFIG_SYS_SDRAM_BASE MMDC0_ARB_BASE_ADDR
#define CONFIG_SYS_MEMTEST_END \
(CONFIG_SYS_MEMTEST_START + 500 * 1024 * 1024)
-#define CONFIG_SYS_TEXT_BASE 0x80000000
-#define CONFIG_SYS_BOOTMAPSZ 0x6C000000
-#define CONFIG_SYS_LOAD_ADDR 0x10800000
+#define CONFIG_SYS_BOOTMAPSZ 0x10000000
/* Serial console */
#define CONFIG_MXC_UART
#define CONFIG_MXC_UART_BASE UART1_BASE /* select UART1/UART2 */
#define CONFIG_BAUDRATE 115200
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV
-#define CONFIG_CONSOLE_MUX
#define CONFIG_CONS_INDEX 1
/* *** Command definition *** */
#define CONFIG_CMD_BMODE
-#define CONFIG_CMD_SETEXPR
-#define CONFIG_CMD_MEMTEST
-#define CONFIG_CMD_TIME
+#define CONFIG_CMD_PART
/* Filesystems / image support */
-#define CONFIG_CMD_EXT4
-#define CONFIG_CMD_FAT
-#define CONFIG_DOS_PARTITION
#define CONFIG_EFI_PARTITION
-#define CONFIG_CMD_FS_GENERIC
-
-#define CONFIG_OF_LIBFDT
-#define CONFIG_CMD_BOOTZ
-#define CONFIG_SUPPORT_RAW_INITRD
-#define CONFIG_FIT
+#define CONFIG_PARTITION_UUIDS
/* MMC */
-#define CONFIG_FSL_ESDHC
-#define CONFIG_FSL_USDHC
#define CONFIG_SYS_FSL_USDHC_NUM 3
#define CONFIG_SYS_FSL_ESDHC_ADDR USDHC4_BASE_ADDR
-
-#define CONFIG_MMC
-#define CONFIG_CMD_MMC
-#define CONFIG_GENERIC_MMC
#define CONFIG_SUPPORT_EMMC_BOOT
-#define CONFIG_BOUNCE_BUFFER
/* Ethernet */
#define CONFIG_FEC_MXC
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_NET
#define CONFIG_FEC_MXC
#define CONFIG_MII
#define IMX_FEC_BASE ENET_BASE_ADDR
#define CONFIG_PHY_ATHEROS
/* Framebuffer */
-#define CONFIG_VIDEO
#ifdef CONFIG_VIDEO
#define CONFIG_VIDEO_IPUV3
#define CONFIG_IPUV3_CLK 260000000
-#define CONFIG_CFB_CONSOLE
-#define CONFIG_CFB_CONSOLE_ANSI
-#define CONFIG_VIDEO_SW_CURSOR
-#define CONFIG_VGA_AS_SINGLE_DEVICE
#define CONFIG_VIDEO_BMP_RLE8
#define CONFIG_IMX_HDMI
#define CONFIG_IMX_VIDEO_SKIP
/* PCI */
#define CONFIG_CMD_PCI
#ifdef CONFIG_CMD_PCI
-#define CONFIG_PCI
#define CONFIG_PCI_PNP
#define CONFIG_PCI_SCAN_SHOW
#define CONFIG_PCIE_IMX
#endif
/* USB */
-#define CONFIG_CMD_USB
#ifdef CONFIG_CMD_USB
#define CONFIG_USB_EHCI
#define CONFIG_USB_EHCI_MX6
#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
-#define CONFIG_USB_STORAGE
-#define CONFIG_CMD_USB_MASS_STORAGE
#ifdef CONFIG_CMD_USB_MASS_STORAGE
-#define CONFIG_CI_UDC
#define CONFIG_USBD_HS
-#define CONFIG_USB_GADGET
-#define CONFIG_USB_GADGET_MASS_STORAGE
-#define CONFIG_USB_GADGET_DUALSPEED
-#define CONFIG_USB_GADGET_VBUS_DRAW 0
-#define CONFIG_USBDOWNLOAD_GADGET
-#define CONFIG_G_DNL_VENDOR_NUM 0x0525
-#define CONFIG_G_DNL_PRODUCT_NUM 0xa4a5
-#define CONFIG_G_DNL_MANUFACTURER "TBS"
+#define CONFIG_USB_FUNCTION_MASS_STORAGE
#endif /* CONFIG_CMD_USB_MASS_STORAGE */
-#define CONFIG_USB_KEYBOARD
#ifdef CONFIG_USB_KEYBOARD
#define CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE
-#define CONFIG_SYS_STDIO_DEREGISTER
#define CONFIG_PREBOOT \
+ "usb start; " \
"if hdmidet; then " \
- "usb start; " \
- "run set_con_usb_hdmi; " \
+ "run set_con_hdmi; " \
"else " \
"run set_con_serial; " \
"fi;"
/* RTC */
#define CONFIG_CMD_DATE
#ifdef CONFIG_CMD_DATE
-#define CONFIG_CMD_I2C
#define CONFIG_RTC_DS1307
#define CONFIG_SYS_RTC_BUS_NUM 2
#endif
/* I2C */
-#define CONFIG_CMD_I2C
#ifdef CONFIG_CMD_I2C
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
+#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
#define CONFIG_SYS_I2C_SPEED 100000
#define CONFIG_I2C_EDID
#endif
-/* Fuses */
-#define CONFIG_CMD_FUSE
-#ifdef CONFIG_CMD_FUSE
-#define CONFIG_MXC_OCOTP
-#endif
-
-#ifndef CONFIG_SYS_DCACHE_OFF
-#define CONFIG_CMD_CACHE
-#endif
-
/* Environment organization */
#define CONFIG_ENV_IS_IN_MMC
-#define CONFIG_SYS_MMC_ENV_DEV 2
-#define CONFIG_SYS_MMC_ENV_PART 1
+#define CONFIG_SYS_MMC_ENV_DEV 2 /* overwritten on SD boot */
+#define CONFIG_SYS_MMC_ENV_PART 1 /* overwritten on SD boot */
#define CONFIG_ENV_SIZE (8 * 1024)
#define CONFIG_ENV_OFFSET (384 * 1024)
#define CONFIG_ENV_OVERWRITE
"bootargs_upd=setenv bootargs console=ttymxc0,115200 " \
"rdinit=/sbin/init enable_wait_mode=off\0" \
"bootcmd_mmc=run bootargs_mmc; mmc dev 2; " \
- "mmc read 0x10800000 0x800 0x4000; bootm\0" \
+ "mmc read 0x10800000 0x800 0x4000; bootm 0x10800000\0" \
"bootcmd_up1=load mmc 1 0x10800000 uImage\0" \
"bootcmd_up2=load mmc 1 0x10d00000 uramdisk.img; " \
"run bootargs_upd; " \
"bootm 0x10800000 0x10d00000\0" \
"console=ttymxc0\0" \
"fan=gpio set 92\0" \
- "set_con_serial=setenv stdin serial; " \
- "setenv stdout serial; " \
+ "set_con_serial=setenv stdout serial; " \
"setenv stderr serial;\0" \
- "set_con_usb_hdmi=setenv stdin serial,usbkbd; " \
- "setenv stdout serial,vga; " \
- "setenv stderr serial,vga;\0"
+ "set_con_hdmi=setenv stdout serial,vga; " \
+ "setenv stderr serial,vga;\0" \
+ "stderr=serial,vga;\0" \
+ "stdin=serial,usbkbd;\0" \
+ "stdout=serial,vga;\0"
#define CONFIG_BOOTCOMMAND \
"mmc rescan; " \
projects / people / ms / u-boot.git / blobdiff