drivers/pci/Kconfig: Add PCI

[people/ms/u-boot.git] / include / configs / tbs2910.h

diff --git a/include/configs/tbs2910.h b/include/configs/tbs2910.h
index 33ac955e336e890ab3342e8ee0a425f764e6d0f4..4d5fdc7869c81d54497708e581a5ac5fe22a24f9 100644 (file)
--- a/include/configs/tbs2910.h
+++ b/include/configs/tbs2910.h
@@ -39,28 +39,22 @@
 #define CONFIG_SYS_MEMTEST_END \
        (CONFIG_SYS_MEMTEST_START + 500 * 1024 * 1024)
 
-#define CONFIG_SYS_BOOTMAPSZ           0x6C000000
+#define CONFIG_SYS_BOOTMAPSZ           0x10000000
 
 /* Serial console */
 #define CONFIG_MXC_UART
 #define CONFIG_MXC_UART_BASE           UART1_BASE /* select UART1/UART2 */
 #define CONFIG_BAUDRATE                        115200
 
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV
-#define CONFIG_CONSOLE_MUX
 #define CONFIG_CONS_INDEX              1
 
-#define CONFIG_PRE_CONSOLE_BUFFER
-#define CONFIG_PRE_CON_BUF_SZ          4096
-#define CONFIG_PRE_CON_BUF_ADDR                0x7C000000
-
 /* *** Command definition *** */
 #define CONFIG_CMD_BMODE
-#define CONFIG_CMD_MEMTEST
-#define CONFIG_CMD_TIME
+#define CONFIG_CMD_PART
 
 /* Filesystems / image support */
 #define CONFIG_EFI_PARTITION
+#define CONFIG_PARTITION_UUIDS
 
 /* MMC */
 #define CONFIG_SYS_FSL_USDHC_NUM       3
@@ -69,9 +63,6 @@
 
 /* Ethernet */
 #define CONFIG_FEC_MXC
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_MII
 #define CONFIG_FEC_MXC
 #define CONFIG_MII
 #define IMX_FEC_BASE                   ENET_BASE_ADDR
@@ -82,14 +73,9 @@
 #define CONFIG_PHY_ATHEROS
 
 /* Framebuffer */
-#define CONFIG_VIDEO
 #ifdef CONFIG_VIDEO
 #define CONFIG_VIDEO_IPUV3
 #define CONFIG_IPUV3_CLK               260000000
-#define CONFIG_CFB_CONSOLE
-#define CONFIG_CFB_CONSOLE_ANSI
-#define CONFIG_VIDEO_SW_CURSOR
-#define CONFIG_VGA_AS_SINGLE_DEVICE
 #define CONFIG_VIDEO_BMP_RLE8
 #define CONFIG_IMX_HDMI
 #define CONFIG_IMX_VIDEO_SKIP
@@ -99,7 +85,6 @@
 /* PCI */
 #define CONFIG_CMD_PCI
 #ifdef CONFIG_CMD_PCI
-#define CONFIG_PCI
 #define CONFIG_PCI_PNP
 #define CONFIG_PCI_SCAN_SHOW
 #define CONFIG_PCIE_IMX
@@ -118,35 +103,22 @@
 #endif
 
 /* USB */
-#define CONFIG_CMD_USB
 #ifdef CONFIG_CMD_USB
 #define CONFIG_USB_EHCI
 #define CONFIG_USB_EHCI_MX6
 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 #define CONFIG_MXC_USB_PORTSC          (PORT_PTS_UTMI | PORT_PTS_PTW)
-#define CONFIG_USB_STORAGE
-#define CONFIG_CMD_USB_MASS_STORAGE
 #ifdef CONFIG_CMD_USB_MASS_STORAGE
-#define CONFIG_CI_UDC
 #define CONFIG_USBD_HS
-#define CONFIG_USB_GADGET
 #define CONFIG_USB_FUNCTION_MASS_STORAGE
-#define CONFIG_USB_GADGET_DUALSPEED
-#define CONFIG_USB_GADGET_VBUS_DRAW    0
-#define CONFIG_USB_GADGET_DOWNLOAD
-#define CONFIG_G_DNL_VENDOR_NUM                0x0525
-#define CONFIG_G_DNL_PRODUCT_NUM       0xa4a5
-#define CONFIG_G_DNL_MANUFACTURER      "TBS"
 #endif /* CONFIG_CMD_USB_MASS_STORAGE */
-#define CONFIG_USB_KEYBOARD
 #ifdef CONFIG_USB_KEYBOARD
 #define CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE
-#define CONFIG_SYS_STDIO_DEREGISTER
 #define CONFIG_PREBOOT \
+       "usb start; " \
        "if hdmidet; then " \
-               "usb start; " \
-               "run set_con_usb_hdmi; " \
+               "run set_con_hdmi; " \
        "else " \
                "run set_con_serial; " \
        "fi;"
@@ -156,13 +128,11 @@
 /* RTC */
 #define CONFIG_CMD_DATE
 #ifdef CONFIG_CMD_DATE
-#define CONFIG_CMD_I2C
 #define CONFIG_RTC_DS1307
 #define CONFIG_SYS_RTC_BUS_NUM         2
 #endif
 
 /* I2C */
-#define CONFIG_CMD_I2C
 #ifdef CONFIG_CMD_I2C
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_MXC
@@ -198,12 +168,13 @@
                        "bootm 0x10800000 0x10d00000\0" \
        "console=ttymxc0\0" \
        "fan=gpio set 92\0" \
-       "set_con_serial=setenv stdin serial; " \
-                       "setenv stdout serial; " \
+       "set_con_serial=setenv stdout serial; " \
                        "setenv stderr serial;\0" \
-       "set_con_usb_hdmi=setenv stdin serial,usbkbd; " \
-                       "setenv stdout serial,vga; " \
-                       "setenv stderr serial,vga;\0"
+       "set_con_hdmi=setenv stdout serial,vga; " \
+                       "setenv stderr serial,vga;\0" \
+       "stderr=serial,vga;\0" \
+       "stdin=serial,usbkbd;\0" \
+       "stdout=serial,vga;\0"
 
 #define CONFIG_BOOTCOMMAND \
        "mmc rescan; " \