Convert CONFIG_VIDEO to Kconfig

[people/ms/u-boot.git] / include / configs / theadorable.h

diff --git a/include/configs/theadorable.h b/include/configs/theadorable.h
index 9f186add71f427af7430b1a7235c9222d3ebe56b..0c18dbf29af33be20a88904af2278f5ad49f1226 100644 (file)
--- a/include/configs/theadorable.h
+++ b/include/configs/theadorable.h
@@ -23,16 +23,8 @@
 /*
  * Commands configuration
  */
-#define CONFIG_CMD_BOOTZ
-#define CONFIG_CMD_CACHE
 #define CONFIG_CMD_ENV
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_EXT4
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_FS_GENERIC
-#define CONFIG_CMD_I2C
 #define CONFIG_CMD_SATA
-#define CONFIG_CMD_TIME
 
 /*
  * The debugging version enables USB support via defconfig.
@@ -40,17 +32,14 @@
  * interfaces / features.
  */
 #ifdef CONFIG_USB
-#define CONFIG_CMD_DHCP
 #define CONFIG_CMD_PCI
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_SPI
-#define CONFIG_CMD_TFTPPUT
 #endif
 
 /* I2C */
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_MVTWSI
 #define CONFIG_I2C_MVTWSI_BASE0                MVEBU_TWSI_BASE
+#define CONFIG_I2C_MVTWSI_BASE1                MVEBU_TWSI1_BASE
 #define CONFIG_SYS_I2C_SLAVE           0x0
 #define CONFIG_SYS_I2C_SPEED           100000
 
@@ -78,9 +67,6 @@
 #define CONFIG_SYS_ALT_MEMTEST
 #define CONFIG_PREBOOT
 
-#define CONFIG_SYS_HUSH_PARSER                 /* Use the HUSH parser  */
-#define        CONFIG_SYS_PROMPT_HUSH_PS2      "> "
-
 /* Keep device tree and initrd in lower memory so the kernel can access them */
 #define CONFIG_EXTRA_ENV_SETTINGS      \
        "fdt_high=0x10000000\0"         \
@@ -103,17 +89,30 @@
 #define CONFIG_PCI
 #define CONFIG_PCI_MVEBU
 #define CONFIG_PCI_PNP
+#define CONFIG_BOARD_LATE_INIT         /* for PEX switch test */
 #endif
 #endif
 
 /* Enable LCD and reserve 512KB from top of memory*/
 #define CONFIG_SYS_MEM_TOP_HIDE                0x80000
 
-#define CONFIG_VIDEO
 #define CONFIG_CFB_CONSOLE
 #define CONFIG_VGA_AS_SINGLE_DEVICE
 #define CONFIG_CMD_BMP
 
+/* FPGA programming support */
+#define CONFIG_FPGA
+#define CONFIG_FPGA_ALTERA
+#define CONFIG_FPGA_STRATIX_V
+
+/*
+ * Bootcounter
+ */
+#define CONFIG_BOOTCOUNT_LIMIT
+#define CONFIG_BOOTCOUNT_RAM
+/* Max size of RAM minus BOOTCOUNT_ADDR is the bootcounter address */
+#define BOOTCOUNT_ADDR                 0x1000
+
 /*
  * mv-common.h should be defined after CMD configs since it used them
  * to enable certain macros
@@ -149,17 +148,8 @@
 #define CONFIG_SPL_STACK               (0x40000000 + ((192 - 16) << 10))
 #define CONFIG_SPL_BOOTROM_SAVE                (CONFIG_SPL_STACK + 4)
 
-#define CONFIG_SPL_LIBCOMMON_SUPPORT
-#define CONFIG_SPL_LIBGENERIC_SUPPORT
-#define CONFIG_SPL_SERIAL_SUPPORT
-#define CONFIG_SPL_I2C_SUPPORT
-
 /* SPL related SPI defines */
-#define CONFIG_SPL_SPI_SUPPORT
-#define CONFIG_SPL_SPI_FLASH_SUPPORT
 #define CONFIG_SPL_SPI_LOAD
-#define CONFIG_SPL_SPI_BUS             0
-#define CONFIG_SPL_SPI_CS              0
 #define CONFIG_SYS_SPI_U_BOOT_OFFS     0x1a000
 #define CONFIG_SYS_U_BOOT_OFFS         CONFIG_SYS_SPI_U_BOOT_OFFS