Convert CONFIG_SPL_LIBGENERIC_SUPPORT to Kconfig

[people/ms/u-boot.git] / include / configs / ti_armv7_common.h

diff --git a/include/configs/ti_armv7_common.h b/include/configs/ti_armv7_common.h
index 3afd6d7e883591391de50a368203ebeb8b3b3e6b..e8fae15495e18aa06f35aeda83f51b4fd37b86fe 100644 (file)
--- a/include/configs/ti_armv7_common.h
+++ b/include/configs/ti_armv7_common.h
@@ -59,11 +59,34 @@
 #define DEFAULT_MMC_TI_ARGS \
        "mmcdev=0\0" \
        "mmcrootfstype=ext4 rootwait\0" \
-       "finduuid=part uuid mmc 0:2 uuid\0" \
+       "finduuid=part uuid mmc ${bootpart} uuid\0" \
        "args_mmc=run finduuid;setenv bootargs console=${console} " \
                "${optargs} " \
                "root=PARTUUID=${uuid} rw " \
-               "rootfstype=${mmcrootfstype}\0"
+               "rootfstype=${mmcrootfstype}\0" \
+       "loadbootscript=load mmc ${mmcdev} ${loadaddr} boot.scr\0" \
+       "bootscript=echo Running bootscript from mmc${mmcdev} ...; " \
+               "source ${loadaddr}\0" \
+       "bootenvfile=uEnv.txt\0" \
+       "importbootenv=echo Importing environment from mmc${mmcdev} ...; " \
+               "env import -t ${loadaddr} ${filesize}\0" \
+       "loadbootenv=fatload mmc ${mmcdev} ${loadaddr} ${bootenvfile}\0" \
+       "envboot=mmc dev ${mmcdev}; " \
+               "if mmc rescan; then " \
+                       "echo SD/MMC found on device ${mmcdev};" \
+                       "if run loadbootscript; then " \
+                               "run bootscript;" \
+                       "else " \
+                               "if run loadbootenv; then " \
+                                       "echo Loaded env from ${bootenvfile};" \
+                                       "run importbootenv;" \
+                               "fi;" \
+                               "if test -n $uenvcmd; then " \
+                                       "echo Running uenvcmd ...;" \
+                                       "run uenvcmd;" \
+                               "fi;" \
+                       "fi;" \
+               "fi;\0" \
 
 /*
  * DDR information.  If the CONFIG_NR_DRAM_BANKS is not defined,
@@ -85,19 +108,32 @@
 /* Timer information. */
 #define CONFIG_SYS_PTV                 2       /* Divisor: 2^(PTV+1) => 8 */
 
+/*
+ * Disable DM_* for SPL build and can be re-enabled after adding
+ * DM support in SPL
+ */
+#ifdef CONFIG_SPL_BUILD
+#undef CONFIG_DM_I2C
+#endif
+
 /* I2C IP block */
 #define CONFIG_I2C
-#define CONFIG_CMD_I2C
+#ifndef CONFIG_DM_I2C
 #define CONFIG_SYS_I2C
+#else
+/*
+ * Enable CONFIG_DM_I2C_COMPAT temporarily until all the i2c client
+ * devices are adopted to DM
+ */
+#define CONFIG_DM_I2C_COMPAT
+#endif
 
 /* MMC/SD IP block */
 #define CONFIG_MMC
 #define CONFIG_GENERIC_MMC
-#define CONFIG_CMD_MMC
 
 /* McSPI IP block */
 #define CONFIG_SPI
-#define CONFIG_CMD_SPI
 
 /* GPIO block */
 
@@ -115,7 +151,6 @@
 #else
 #define CONFIG_SYS_MALLOC_LEN  (16 << 20)
 #endif
-#define CONFIG_SYS_HUSH_PARSER
 #define CONFIG_SYS_CONSOLE_INFO_QUIET
 #define CONFIG_BAUDRATE                        115200
 #define CONFIG_ENV_VARS_UBOOT_CONFIG   /* Strongly encouraged */
@@ -125,7 +160,6 @@
 #define CONFIG_SYS_LONGHELP
 #define CONFIG_AUTO_COMPLETE
 #define CONFIG_CMDLINE_EDITING
-#define CONFIG_VERSION_VARIABLE
 
 /* We set the max number of command args high to avoid HUSH bugs. */
 #define CONFIG_SYS_MAXARGS             64
@@ -148,8 +182,6 @@
 #define CONFIG_CMD_MTDPARTS
 #endif
 
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_BOOTZ
 #define CONFIG_SUPPORT_RAW_INITRD
 
 /*
@@ -158,11 +190,7 @@
  */
 #if defined(CONFIG_MMC) || defined(CONFIG_USB_STORAGE)
 #define CONFIG_DOS_PARTITION
-#define CONFIG_CMD_FAT
 #define CONFIG_FAT_WRITE
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_EXT4
-#define CONFIG_CMD_FS_GENERIC
 #define CONFIG_PARTITION_UUIDS
 #define CONFIG_CMD_PART
 #endif
@@ -183,14 +211,14 @@
 /*
  * Place the image at the start of the ROM defined image space (per
  * CONFIG_SPL_TEXT_BASE and we limit our size to the ROM-defined
- * downloaded image area.  We initalize DRAM as soon as we can so that
- * we can place stack, malloc and BSS there.  We load U-Boot itself into
- * memory at 0x80800000 for legacy reasons (to not conflict with older
- * SPLs).  We have our BSS be placed 2MiB after this, to allow for the
- * default Linux kernel address of 0x80008000 to work with most sized
- * kernels, in the Falcon Mode case.  We have the SPL malloc pool at the
- * end of the BSS area.  We suggest that the stack be placed at 32MiB after
- * the start of DRAM to allow room for all of the above (handled in Kconfig).
+ * downloaded image area minus 1KiB for scratch space.  We initalize DRAM as
+ * soon as we can so that we can place stack, malloc and BSS there.  We load
+ * U-Boot itself into memory at 0x80800000 for legacy reasons (to not conflict
+ * with older SPLs).  We have our BSS be placed 2MiB after this, to allow for
+ * the default Linux kernel address of 0x80008000 to work with most sized
+ * kernels, in the Falcon Mode case.  We have the SPL malloc pool at the end
+ * of the BSS area.  We suggest that the stack be placed at 32MiB after the
+ * start of DRAM to allow room for all of the above (handled in Kconfig).
  */
 #ifndef CONFIG_SYS_TEXT_BASE
 #define CONFIG_SYS_TEXT_BASE           0x80800000
@@ -204,6 +232,11 @@
                                         CONFIG_SPL_BSS_MAX_SIZE)
 #define CONFIG_SYS_SPL_MALLOC_SIZE     CONFIG_SYS_MALLOC_LEN
 #endif
+#ifndef CONFIG_SPL_MAX_SIZE
+#define CONFIG_SPL_MAX_SIZE            (SRAM_SCRATCH_SPACE_ADDR - \
+                                        CONFIG_SPL_TEXT_BASE)
+#endif
+
 
 /* RAW SD card / eMMC locations. */
 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR        0x300 /* address 0x60000 */
@@ -228,21 +261,14 @@
 #endif
 
 #ifdef CONFIG_MMC
-#define CONFIG_SPL_LIBDISK_SUPPORT
 #define CONFIG_SPL_MMC_SUPPORT
-#define CONFIG_SPL_FAT_SUPPORT
-#define CONFIG_SPL_EXT_SUPPORT
 #endif
 
 #define CONFIG_SYS_THUMB_BUILD
 
 /* General parts of the framework, required. */
-#define CONFIG_SPL_I2C_SUPPORT
-#define CONFIG_SPL_LIBCOMMON_SUPPORT
-#define CONFIG_SPL_LIBGENERIC_SUPPORT
 #define CONFIG_SPL_SERIAL_SUPPORT
 #define CONFIG_SPL_POWER_SUPPORT
-#define CONFIG_SPL_GPIO_SUPPORT
 #define CONFIG_SPL_BOARD_INIT
 
 #ifdef CONFIG_NAND
@@ -282,6 +308,5 @@
 #endif
 
 #include <config_distro_defaults.h>
-#define CONFIG_CMD_EXT4_WRITE
 
 #endif /* __CONFIG_TI_ARMV7_COMMON_H__ */