bootcount: Migrate CONFIG_SYS_BOOTCOUNT_ADDR

[people/ms/u-boot.git] / include / configs / ti_armv7_keystone2.h

diff --git a/include/configs/ti_armv7_keystone2.h b/include/configs/ti_armv7_keystone2.h
index 03e28fc39b4066244ffd73ee9df524ee9f261a01..2fe8d9dde0f8216a6c13460b692f712c78c233dc 100644 (file)
--- a/include/configs/ti_armv7_keystone2.h
+++ b/include/configs/ti_armv7_keystone2.h
@@ -18,9 +18,6 @@
 /* SoC Configuration */
 #define CONFIG_ARCH_CPU_INIT
 #define CONFIG_SYS_ARCH_TIMER
-#ifndef CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_TEXT_BASE           0x0c000000
-#endif
 #define CONFIG_SPL_TARGET              "u-boot-spi.gph"
 #define CONFIG_SYS_DCACHE_OFF
 
@@ -78,7 +75,6 @@
 #endif
 
 /* SPI Configuration */
-#define CONFIG_DAVINCI_SPI
 #define CONFIG_SYS_SPI_CLK             ks_clk_get_rate(KS2_CLK1_6)
 #define CONFIG_SF_DEFAULT_SPEED                30000000
 #define CONFIG_ENV_SPI_MAX_HZ          CONFIG_SF_DEFAULT_SPEED
@@ -100,7 +96,6 @@
 #define CONFIG_PHY_MARVELL
 #define CONFIG_MII
 #define CONFIG_BOOTP_DEFAULT
-#define CONFIG_BOOTP_DNS
 #define CONFIG_BOOTP_DNS2
 #define CONFIG_BOOTP_SEND_HOSTNAME
 #define CONFIG_NET_RETRY_COUNT         32
@@ -160,7 +155,6 @@
 #define CONFIG_SYS_DAVINCI_I2C_SLAVE1  0x10 /* SMBus host address */
 #define CONFIG_SYS_DAVINCI_I2C_SPEED2  100000
 #define CONFIG_SYS_DAVINCI_I2C_SLAVE2  0x10 /* SMBus host address */
-#define I2C_BUS_MAX                    3
 
 /* EEPROM definitions */
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN         2
@@ -185,10 +179,6 @@
 #define CONFIG_SYS_NAND_MAX_CHIPS              1
 #define CONFIG_SYS_NAND_NO_SUBPAGE_WRITE
 #define CONFIG_MTD_PARTITIONS
-#define MTDIDS_DEFAULT                 "nand0=davinci_nand.0"
-#define MTDPARTS_DEFAULT               "mtdparts=davinci_nand.0:" \
-                                       "1024k(bootloader)ro,512k(params)ro," \
-                                       "-(ubifs)"
 
 /* USB Configuration */
 #define CONFIG_USB_XHCI_KEYSTONE
@@ -197,9 +187,6 @@
 #define CONFIG_DEV_USB_PHY_BASE                        KS2_DEV_USB_PHY_BASE
 #define CONFIG_USB_PHY_CFG_BASE                        KS2_USB_PHY_CFG_BASE
 
-/* U-Boot command configuration */
-#define CONFIG_CMD_SAVES
-
 /* U-Boot general configuration */
 #define CONFIG_MISC_INIT_R
 #define CONFIG_MX_CYCLIC
@@ -274,7 +261,7 @@
                                        "${bootdir}/${fit_bootfile}\0"  \
        "get_uboot_net=dhcp ${loadaddr} ${tftp_root}/${name_uboot}\0"   \
        "get_uboot_nfs=nfs ${loadaddr} ${nfs_root}/boot/${name_uboot}\0" \
-       "burn_uboot_spi=sf probe; sf erase 0 0x80000; "         \
+       "burn_uboot_spi=sf probe; sf erase 0 0x100000; "                \
                "sf write ${loadaddr} 0 ${filesize}\0"          \
        "burn_uboot_nand=nand erase 0 0x100000; "                       \
                "nand write ${loadaddr} 0 ${filesize}\0"                \
@@ -320,8 +307,6 @@
 #endif
 #endif
 
-#define CONFIG_BOOTARGS                                                        \
-
 /* Now for the remaining common defines */
 #include <configs/ti_armv7_common.h>