/* U-Boot Build Configuration */
#define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is a 2nd stage loader */
#define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_DISPLAY_CPUINFO
/* SoC Configuration */
#define CONFIG_ARCH_CPU_INIT
#define CONFIG_SYS_ARCH_TIMER
-#define CONFIG_SYS_TEXT_BASE 0x0c001000
+#ifndef CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_TEXT_BASE 0x0c000000
+#endif
#define CONFIG_SPL_TARGET "u-boot-spi.gph"
#define CONFIG_SYS_DCACHE_OFF
#define CONFIG_SYS_LPAE_SDRAM_BASE 0x800000000
#define CONFIG_MAX_RAM_BANK_SIZE (2 << 30) /* 2GB */
#define CONFIG_STACKSIZE (512 << 10) /* 512 KiB */
-#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE - \
+#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SPL_TEXT_BASE - \
GENERATED_GBL_DATA_SIZE)
+#ifdef CONFIG_SYS_MALLOC_F_LEN
+#define SPL_MALLOC_F_SIZE CONFIG_SYS_MALLOC_F_LEN
+#else
+#define SPL_MALLOC_F_SIZE 0
+#endif
+
/* SPL SPI Loader Configuration */
#define CONFIG_SPL_PAD_TO 65536
#define CONFIG_SPL_MAX_SIZE (CONFIG_SPL_PAD_TO - 8)
#define CONFIG_SPL_STACK_SIZE (8 * 1024)
#define CONFIG_SPL_STACK (CONFIG_SYS_SPL_MALLOC_START + \
CONFIG_SYS_SPL_MALLOC_SIZE + \
+ SPL_MALLOC_F_SIZE + \
CONFIG_SPL_STACK_SIZE - 4)
-#define CONFIG_SPL_SPI_FLASH_SUPPORT
-#define CONFIG_SPL_SPI_SUPPORT
#define CONFIG_SPL_SPI_LOAD
#define CONFIG_SYS_SPI_U_BOOT_OFFS CONFIG_SPL_PAD_TO
/* UART Configuration */
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
#define CONFIG_SYS_NS16550_MEM32
+#if defined(CONFIG_SPL_BUILD) || !defined(CONFIG_DM_SERIAL)
+#define CONFIG_SYS_NS16550_SERIAL
#define CONFIG_SYS_NS16550_REG_SIZE -4
+#endif
#define CONFIG_SYS_NS16550_COM1 KS2_UART0_BASE
#define CONFIG_SYS_NS16550_COM2 KS2_UART1_BASE
-#define CONFIG_SYS_NS16550_CLK clk_get_rate(KS2_CLK1_6)
#define CONFIG_CONS_INDEX 1
+#ifndef CONFIG_SOC_K2G
+#define CONFIG_SYS_NS16550_CLK clk_get_rate(KS2_CLK1_6)
+#else
+#define CONFIG_SYS_NS16550_CLK clk_get_rate(uart_pll_clk) / 2
+#endif
+
/* SPI Configuration */
-#define CONFIG_SPI_FLASH_STMICRO
#define CONFIG_DAVINCI_SPI
#define CONFIG_SYS_SPI_CLK clk_get_rate(KS2_CLK1_6)
#define CONFIG_SF_DEFAULT_SPEED 30000000
#define CONFIG_SYS_SPI2
#define CONFIG_SYS_SPI2_BASE KS2_SPI2_BASE
#define CONFIG_SYS_SPI2_NUM_CS 4
+#ifdef CONFIG_SPL_BUILD
+#undef CONFIG_DM_SPI
+#undef CONFIG_DM_SPI_FLASH
+#endif
/* Network Configuration */
#define CONFIG_PHYLIB
/* SerDes */
#define CONFIG_TI_KEYSTONE_SERDES
-/* AEMIF */
-#define CONFIG_TI_AEMIF
#define CONFIG_AEMIF_CNTRL_BASE KS2_AEMIF_CNTRL_BASE
/* I2C Configuration */
#define I2C_BUS_MAX 3
/* EEPROM definitions */
-#define CONFIG_SYS_I2C_MULTI_EEPROMS
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 6
"-(ubifs)"
/* USB Configuration */
-#define CONFIG_USB_XHCI
-#define CONFIG_USB_XHCI_DWC3
#define CONFIG_USB_XHCI_KEYSTONE
#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2
#define CONFIG_EFI_PARTITION
#define CONFIG_FS_FAT
-#define CONFIG_SYS_CACHELINE_SIZE 64
#define CONFIG_USB_SS_BASE KS2_USB_SS_BASE
#define CONFIG_USB_HOST_XHCI_BASE KS2_USB_HOST_XHCI_BASE
#define CONFIG_DEV_USB_PHY_BASE KS2_DEV_USB_PHY_BASE
#define CONFIG_USB_PHY_CFG_BASE KS2_USB_PHY_CFG_BASE
/* U-Boot command configuration */
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_PING
#define CONFIG_CMD_SAVES
-#define CONFIG_CMD_NAND
-#define CONFIG_CMD_UBI
#define CONFIG_CMD_UBIFS
-#define CONFIG_CMD_SF
#define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_USB
/* U-Boot general configuration */
#define CONFIG_MISC_INIT_R
/* EDMA3 */
#define CONFIG_TI_EDMA3
+#define DEFAULT_FW_INITRAMFS_BOOT_ENV \
+ "name_fw_rd=k2-fw-initrd.cpio.gz\0" \
+ "set_rd_spec=setenv rd_spec ${rdaddr}:${filesize}\0" \
+ "init_fw_rd_net=dhcp ${rdaddr} ${tftp_root}/${name_fw_rd}; " \
+ "run set_rd_spec\0" \
+ "init_fw_rd_ramfs=setenv rd_spec -\0" \
+ "init_fw_rd_ubi=ubifsload ${rdaddr} ${bootdir}/${name_fw_rd}; " \
+ "run set_rd_spec\0" \
+
+#define DEFAULT_PMMC_BOOT_ENV \
+ "set_name_pmmc=setenv name_pmmc ti-sci-firmware-${soc_variant}.bin\0" \
+ "dev_pmmc=0\0" \
+ "get_pmmc_net=dhcp ${loadaddr} ${tftp_root}/${name_pmmc}\0" \
+ "get_pmmc_ramfs=run get_pmmc_net\0" \
+ "get_pmmc_mmc=load mmc ${bootpart} ${loadaddr} " \
+ "${bootdir}/${name_pmmc}\0" \
+ "get_pmmc_ubi=ubifsload ${loadaddr} ${bootdir}/${name_pmmc}\0" \
+ "run_pmmc=rproc init; rproc list; " \
+ "rproc load ${dev_pmmc} ${loadaddr} 0x${filesize}; " \
+ "rproc start ${dev_pmmc}\0" \
+
#define CONFIG_EXTRA_ENV_SETTINGS \
DEFAULT_LINUX_BOOT_ENV \
CONFIG_EXTRA_ENV_KS2_BOARD_SETTINGS \
- "boot=ubi\0" \
+ "bootdir=/boot\0" \
"tftp_root=/\0" \
"nfs_root=/export\0" \
"mem_lpae=1\0" \
- "mem_reserve=512M\0" \
"addr_ubi=0x82000000\0" \
"addr_secdb_key=0xc000000\0" \
"name_kern=zImage\0" \
"run_mon=mon_install ${addr_mon}\0" \
- "run_kern=bootz ${loadaddr} - ${fdtaddr}\0" \
+ "run_kern=bootz ${loadaddr} ${rd_spec} ${fdtaddr}\0" \
"init_net=run args_all args_net\0" \
+ "init_nfs=setenv autoload no; dhcp; run args_all args_net\0" \
"init_ubi=run args_all args_ubi; " \
- "ubi part ubifs; ubifsmount ubi:boot;" \
- "ubifsload ${addr_secdb_key} securedb.key.bin;\0" \
+ "ubi part ubifs; ubifsmount ubi:rootfs;\0" \
"get_fdt_net=dhcp ${fdtaddr} ${tftp_root}/${name_fdt}\0" \
- "get_fdt_ubi=ubifsload ${fdtaddr} ${name_fdt}\0" \
+ "get_fdt_nfs=nfs ${fdtaddr} ${nfs_root}/boot/${name_fdt}\0" \
+ "get_fdt_ubi=ubifsload ${fdtaddr} ${bootdir}/${name_fdt}\0" \
"get_kern_net=dhcp ${loadaddr} ${tftp_root}/${name_kern}\0" \
- "get_kern_ubi=ubifsload ${loadaddr} ${name_kern}\0" \
+ "get_kern_nfs=nfs ${loadaddr} ${nfs_root}/boot/${name_kern}\0" \
+ "get_kern_ubi=ubifsload ${loadaddr} ${bootdir}/${name_kern}\0" \
"get_mon_net=dhcp ${addr_mon} ${tftp_root}/${name_mon}\0" \
- "get_mon_ubi=ubifsload ${addr_mon} ${name_mon}\0" \
- "get_uboot_net=dhcp ${addr_uboot} ${tftp_root}/${name_uboot}\0" \
- "burn_uboot_spi=sf probe; sf erase 0 0x100000; " \
- "sf write ${addr_uboot} 0 ${filesize}\0" \
+ "get_mon_nfs=nfs ${addr_mon} ${nfs_root}/boot/${name_mon}\0" \
+ "get_mon_ubi=ubifsload ${addr_mon} ${bootdir}/${name_mon}\0" \
+ "get_uboot_net=dhcp ${loadaddr} ${tftp_root}/${name_uboot}\0" \
+ "get_uboot_nfs=nfs ${loadaddr} ${nfs_root}/boot/${name_uboot}\0" \
+ "burn_uboot_spi=sf probe; sf erase 0 0x80000; " \
+ "sf write ${loadaddr} 0 ${filesize}\0" \
"burn_uboot_nand=nand erase 0 0x100000; " \
- "nand write ${addr_uboot} 0 ${filesize}\0" \
+ "nand write ${loadaddr} 0 ${filesize}\0" \
"args_all=setenv bootargs console=ttyS0,115200n8 rootwait=1\0" \
"args_net=setenv bootargs ${bootargs} rootfstype=nfs " \
"root=/dev/nfs rw nfsroot=${serverip}:${nfs_root}," \
"get_mon_ramfs=dhcp ${addr_mon} ${tftp_root}/${name_mon}\0" \
"get_fs_ramfs=dhcp ${rdaddr} ${tftp_root}/${name_fs}\0" \
"get_ubi_net=dhcp ${addr_ubi} ${tftp_root}/${name_ubi}\0" \
+ "get_ubi_nfs=nfs ${addr_ubi} ${nfs_root}/boot/${name_ubi}\0" \
"burn_ubi=nand erase.part ubifs; " \
"nand write ${addr_ubi} ubifs ${filesize}\0" \
"init_ramfs=run args_all args_ramfs get_fs_ramfs\0" \
"args_ramfs=setenv bootargs ${bootargs} " \
"rdinit=/sbin/init rw root=/dev/ram0 " \
- "initrd=0x802000000,9M\0" \
+ "initrd=0x808080000,80M\0" \
"no_post=1\0" \
"mtdparts=mtdparts=davinci_nand.0:" \
"1024k(bootloader)ro,512k(params)ro,-(ubifs)\0"
+#ifndef CONFIG_BOOTCOMMAND
#define CONFIG_BOOTCOMMAND \
- "run init_${boot} get_fdt_${boot} get_mon_${boot} " \
- "get_kern_${boot} run_mon run_kern"
+ "run init_${boot} init_fw_rd_${boot} get_fdt_${boot} " \
+ "get_mon_${boot} get_kern_${boot} run_mon run_kern"
+#endif
#define CONFIG_BOOTARGS \
-/* Linux interfacing */
-#define CONFIG_OF_BOARD_SETUP
-
/* Now for the remaining common defines */
#include <configs/ti_armv7_common.h>
#undef CONFIG_SPL_OS_BOOT
/* We do not have MMC support.. yet.. */
-#undef CONFIG_SPL_LIBDISK_SUPPORT
-#undef CONFIG_SPL_MMC_SUPPORT
-#undef CONFIG_SPL_FAT_SUPPORT
-#undef CONFIG_SPL_EXT_SUPPORT
#undef CONFIG_MMC
#undef CONFIG_GENERIC_MMC
-#undef CONFIG_CMD_MMC
/* And no support for GPIO, yet.. */
-#undef CONFIG_SPL_GPIO_SUPPORT
-#undef CONFIG_CMD_GPIO
/* we may include files below only after all above definitions */
#include <asm/arch/hardware.h>
#include <asm/arch/clock.h>
+#ifndef CONFIG_SOC_K2G
#define CONFIG_SYS_HZ_CLOCK clk_get_rate(KS2_CLK1_6)
+#else
+#define CONFIG_SYS_HZ_CLOCK external_clk[sys_clk]
+#endif
#endif /* __CONFIG_KS2_EVM_H */
projects / people / ms / u-boot.git / blobdiff