configs: Migrate RBTREE, LZO, CMD_MTDPARTS, CMD_UBI and CMD_UBIFS

[people/ms/u-boot.git] / include / configs / titanium.h

diff --git a/include/configs/titanium.h b/include/configs/titanium.h
index 9776aebad32fbbb4f23f076534a75be260bc6fc4..ba5a1416b63450a0fe59c458577f1b0e250ed750 100644 (file)
--- a/include/configs/titanium.h
+++ b/include/configs/titanium.h
@@ -17,43 +17,29 @@
 
 #define CONFIG_MX6Q
 
-#define MACH_TYPE_TITANIUM             3769
-#define CONFIG_MACH_TYPE               MACH_TYPE_TITANIUM
+/* Provide the MACH_TYPE value that the vendor kernel requires. */
+#define CONFIG_MACH_TYPE               3769
 
 /* Size of malloc() pool */
 #define CONFIG_SYS_MALLOC_LEN          (2 * 1024 * 1024)
 
-#define CONFIG_BOARD_EARLY_INIT_F
 #define CONFIG_MISC_INIT_R
 
 #define CONFIG_MXC_UART
 #define CONFIG_MXC_UART_BASE           UART1_BASE
 
 /* I2C Configs */
-#define CONFIG_CMD_I2C
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_I2C_MXC_I2C1                /* enable I2C bus 1 */
+#define CONFIG_SYS_I2C_MXC_I2C2                /* enable I2C bus 2 */
 #define CONFIG_SYS_I2C_MXC_I2C3                /* enable I2C bus 3 */
 #define CONFIG_SYS_I2C_SPEED           100000
 
 /* MMC Configs */
-#define CONFIG_FSL_ESDHC
-#define CONFIG_FSL_USDHC
 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
 #define CONFIG_SYS_FSL_USDHC_NUM       1
 
-#define CONFIG_MMC
-#define CONFIG_CMD_MMC
-#define CONFIG_GENERIC_MMC
-#define CONFIG_BOUNCE_BUFFER
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_FAT
-#define CONFIG_DOS_PARTITION
-
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_NET
 #define CONFIG_FEC_MXC
 #define CONFIG_MII
 #define IMX_FEC_BASE                   ENET_BASE_ADDR
@@ -64,25 +50,10 @@
 #define CONFIG_PHY_MICREL_KSZ9021
 
 /* USB Configs */
-#define CONFIG_CMD_USB
-#define CONFIG_CMD_FAT
-#define CONFIG_USB_EHCI
-#define CONFIG_USB_EHCI_MX6
-#define CONFIG_USB_STORAGE
 #define CONFIG_MXC_USB_PORT    1
 #define CONFIG_MXC_USB_PORTSC  (PORT_PTS_UTMI | PORT_PTS_PTW)
 #define CONFIG_MXC_USB_FLAGS   0
 
-/* Miscellaneous commands */
-#define CONFIG_CMD_BMODE
-
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-#define CONFIG_CONS_INDEX              1
-#define CONFIG_BAUDRATE                        115200
-
-/* Command definition */
-
 #define CONFIG_SYS_MEMTEST_START       0x10000000
 #define CONFIG_SYS_MEMTEST_END         (CONFIG_SYS_MEMTEST_START + (500 << 20))
 
@@ -160,21 +131,9 @@
 
 #define CONFIG_BOOTCOMMAND             "run nand_ubifs"
 
-/* Miscellaneous configurable options */
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT              "Titanium > "
-#define CONFIG_AUTO_COMPLETE
-#define CONFIG_CMDLINE_EDITING
-#define CONFIG_SYS_CONSOLE_INFO_QUIET  /* don't print console @ startup */
-
-#define CONFIG_SYS_CBSIZE              256
-
 /* Print Buffer Size */
 #define CONFIG_SYS_PBSIZE              (CONFIG_SYS_CBSIZE + \
                                         sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_MAXARGS             16
-#define CONFIG_SYS_BARGSIZE            CONFIG_SYS_CBSIZE
 
 /* Physical Memory Map */
 #define CONFIG_NR_DRAM_BANKS           1
@@ -193,7 +152,6 @@
 /* Enable NAND support */
 #define CONFIG_CMD_NAND
 #define CONFIG_CMD_NAND_TRIMFFS
-#define CONFIG_CMD_TIME
 
 #ifdef CONFIG_CMD_NAND
 
@@ -228,19 +186,7 @@
 #endif /* CONFIG_CMD_NAND */
 
 /* UBI/UBIFS config options */
-#define CONFIG_LZO
 #define CONFIG_MTD_DEVICE
 #define CONFIG_MTD_PARTITIONS
-#define CONFIG_RBTREE
-#define CONFIG_CMD_MTDPARTS
-#define CONFIG_CMD_UBI
-#define CONFIG_CMD_UBIFS
-
-#define CONFIG_OF_LIBFDT
-#define CONFIG_CMD_BOOTZ
-
-#ifndef CONFIG_SYS_DCACHE_OFF
-#define CONFIG_CMD_CACHE
-#endif
 
 #endif                        /* __CONFIG_H */