config: Move CONFIG_BOARD_LATE_INIT to defconfigs

[people/ms/u-boot.git] / include / configs / tqma6.h

diff --git a/include/configs/tqma6.h b/include/configs/tqma6.h
index f7dc1dc2e70566fc34ad991bd03c54af69fc6ee0..a35d292f164365785e8ad3f9d0bbd55d95cffd0f 100644 (file)
--- a/include/configs/tqma6.h
+++ b/include/configs/tqma6.h
@@ -9,19 +9,21 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#include <linux/kconfig.h>
 /* SPL */
 /* #if defined(CONFIG_SPL_BUILD) */
-
-#define CONFIG_SPL_MMC_SUPPORT
-#define CONFIG_SPL_SPI_SUPPORT
-#define CONFIG_SPL_FAT_SUPPORT
-#define CONFIG_SPL_EXT_SUPPORT
-
 /* common IMX6 SPL configuration */
 #include "imx6_spl.h"
 
 /* #endif */
 
+/* place code in last 4 MiB of RAM */
+#if defined(CONFIG_MX6DL) || defined(CONFIG_MX6S)
+#define CONFIG_SYS_TEXT_BASE           0x2fc00000
+#elif defined(CONFIG_MX6Q) || defined(CONFIG_MX6D)
+#define CONFIG_SYS_TEXT_BASE           0x4fc00000
+#endif
+
 #include "mx6_common.h"
 
 #if defined(CONFIG_MX6DL) || defined(CONFIG_MX6S)
@@ -30,37 +32,27 @@
 #define PHYS_SDRAM_SIZE                        (1024u * SZ_1M)
 #endif
 
-#define CONFIG_CMDLINE_TAG
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_INITRD_TAG
-#define CONFIG_REVISION_TAG
-
 #define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_BOARD_LATE_INIT
 
-#define CONFIG_MXC_GPIO
 #define CONFIG_MXC_UART
 
 /* SPI */
-#define CONFIG_CMD_SPI
 #define CONFIG_MXC_SPI
 
 /* SPI Flash */
-#define CONFIG_SPI_FLASH
-#define CONFIG_SPI_FLASH_STMICRO
 
 #define TQMA6_SPI_FLASH_SECTOR_SIZE    SZ_64K
 
-#define CONFIG_CMD_SF
 #define CONFIG_SF_DEFAULT_BUS  0
 #define CONFIG_SF_DEFAULT_CS   0
 #define CONFIG_SF_DEFAULT_SPEED        50000000
 #define CONFIG_SF_DEFAULT_MODE (SPI_MODE_0)
 
 /* I2C Configs */
-#define CONFIG_CMD_I2C
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_I2C_MXC_I2C1                /* enable I2C bus 1 */
+#define CONFIG_SYS_I2C_MXC_I2C2                /* enable I2C bus 2 */
 #define CONFIG_SYS_I2C_MXC_I2C3                /* enable I2C bus 3 */
 #define CONFIG_I2C_MULTI_BUS
 #define CONFIG_SYS_I2C_SPEED           100000
@@ -86,42 +78,17 @@
 #define TQMA6_PFUZE100_I2C_BUS         2
 
 /* MMC Configs */
-#define CONFIG_FSL_ESDHC
-#define CONFIG_FSL_USDHC
 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
 
-#define CONFIG_MMC
-#define CONFIG_CMD_MMC
-#define CONFIG_GENERIC_MMC
-#define CONFIG_BOUNCE_BUFFER
-
 /* USB Configs */
-#define CONFIG_CMD_USB
 #define CONFIG_USB_EHCI
 #define CONFIG_USB_EHCI_MX6
-#define CONFIG_USB_STORAGE
 #define CONFIG_USB_HOST_ETHER
 #define CONFIG_USB_ETHER_SMSC95XX
 #define CONFIG_MXC_USB_PORTSC  (PORT_PTS_UTMI | PORT_PTS_PTW)
 #define CONFIG_USB_MAX_CONTROLLER_COUNT        2
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET       /* For OTG port */
 
-/* Fuses */
-#define CONFIG_MXC_OCOTP
-#define CONFIG_CMD_FUSE
-
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_EXT4
-#define CONFIG_CMD_EXT4_WRITE
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_FS_GENERIC
-#define CONFIG_DOS_PARTITION
-
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_NET
-
 #define CONFIG_FEC_MXC
 #define IMX_FEC_BASE                   ENET_BASE_ADDR
 #define CONFIG_PHYLIB
@@ -133,27 +100,8 @@
 #define CONFIG_TFTP_BLOCKSIZE  4096
 #define CONFIG_NFS_READ_SIZE   4096
 
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-#define CONFIG_CONS_INDEX              1
-#define CONFIG_BAUDRATE                        115200
-
 /* Command definition */
 #define CONFIG_CMD_BMODE
-#define CONFIG_CMD_BOOTZ
-#define CONFIG_CMD_ITEST
-#define CONFIG_CMD_SETEXPR
-
-#define CONFIG_BOOTDELAY               3
-
-#define CONFIG_LOADADDR                        0x12000000
-
-/* place code in last 4 MiB of RAM */
-#if defined(CONFIG_MX6DL) || defined(CONFIG_MX6S)
-#define CONFIG_SYS_TEXT_BASE           0x2fc00000
-#elif defined(CONFIG_MX6Q) || defined(CONFIG_MX6D)
-#define CONFIG_SYS_TEXT_BASE           0x4fc00000
-#endif
 
 #define CONFIG_ENV_SIZE                        (SZ_8K)
 /* Size of malloc() pool */
@@ -323,7 +271,6 @@
                "sf read ${${fdt_addr}} ${offset} ${size}; "                   \
                "setenv size ; setenv offset\0"                                \
 
-
 #define CONFIG_BOOTCOMMAND                                                     \
        "sf probe; run mmcboot; run netboot; run panicboot"                    \
 
@@ -347,7 +294,7 @@
        "uboot=u-boot.imx\0"                                                   \
        "fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0"                               \
        "fdt_addr="__stringify(TQMA6_FDT_ADDRESS)"\0"                          \
-       "console=" CONFIG_CONSOLE_DEV "\0"                                     \
+       "console=" CONSOLE_DEV "\0"                                     \
        "fdt_high=0xffffffff\0"                                                \
        "initrd_high=0xffffffff\0"                                             \
        "addtty=setenv bootargs ${bootargs} console=${console},${baudrate}\0"  \
@@ -399,23 +346,6 @@
        "panicboot=echo No boot device !!! reset\0"                            \
        TQMA6_EXTRA_BOOTDEV_ENV_SETTINGS                                      \
 
-/* Miscellaneous configurable options */
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT_HUSH_PS2     "> "
-
-#define CONFIG_AUTO_COMPLETE
-#define CONFIG_SYS_CBSIZE              512
-
-/* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE              (CONFIG_SYS_CBSIZE + \
-                                        sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_MAXARGS             16
-#define CONFIG_SYS_BARGSIZE            CONFIG_SYS_CBSIZE
-
-#define CONFIG_SYS_LOAD_ADDR           CONFIG_LOADADDR
-
-#define CONFIG_CMDLINE_EDITING
 #define CONFIG_STACKSIZE               (128u * SZ_1K)
 
 /* Physical Memory Map */
@@ -431,15 +361,6 @@
 #define CONFIG_SYS_INIT_SP_ADDR \
        (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 
-#define CONFIG_OF_LIBFDT
-#define CONFIG_OF_BOARD_SETUP
-#define CONFIG_FIT
-#define CONFIG_FIT_VERBOSE
-
-#ifndef CONFIG_SYS_DCACHE_OFF
-#define CONFIG_CMD_CACHE
-#endif
-
 /*
  * All the defines above are for the TQMa6 SoM
  *
@@ -447,6 +368,8 @@
  */
 #ifdef CONFIG_MBA6
 #include "tqma6_mba6.h"
+#elif CONFIG_WRU4
+#include "tqma6_wru4.h"
 #else
 #error "No baseboard for the TQMa6 defined!"
 #endif