Move CONFIG_OF_LIBFDT to Kconfig

[people/ms/u-boot.git] / include / configs / tqma6.h

diff --git a/include/configs/tqma6.h b/include/configs/tqma6.h
index 012fa1c242bb5f6b3781c6394cce166e44512bc3..e7aa42d73cdff405758b18faa760fd2d90a79705 100644 (file)
--- a/include/configs/tqma6.h
+++ b/include/configs/tqma6.h
@@ -9,8 +9,7 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#define CONFIG_MX6
-
+#include <linux/kconfig.h>
 /* SPL */
 /* #if defined(CONFIG_SPL_BUILD) */
 
@@ -24,10 +23,14 @@
 
 /* #endif */
 
+/* place code in last 4 MiB of RAM */
+#if defined(CONFIG_MX6DL) || defined(CONFIG_MX6S)
+#define CONFIG_SYS_TEXT_BASE           0x2fc00000
+#elif defined(CONFIG_MX6Q) || defined(CONFIG_MX6D)
+#define CONFIG_SYS_TEXT_BASE           0x4fc00000
+#endif
+
 #include "mx6_common.h"
-#include <asm/arch/imx-regs.h>
-#include <asm/imx-common/gpio.h>
-#include <linux/sizes.h>
 
 #if defined(CONFIG_MX6DL) || defined(CONFIG_MX6S)
 #define PHYS_SDRAM_SIZE                        (512u * SZ_1M)
@@ -35,19 +38,9 @@
 #define PHYS_SDRAM_SIZE                        (1024u * SZ_1M)
 #endif
 
-#define CONFIG_DISPLAY_CPUINFO
-#define CONFIG_DISPLAY_BOARDINFO
-#define CONFIG_SYS_GENERIC_BOARD
-
-#define CONFIG_CMDLINE_TAG
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_INITRD_TAG
-#define CONFIG_REVISION_TAG
-
 #define CONFIG_BOARD_EARLY_INIT_F
 #define CONFIG_BOARD_LATE_INIT
 
-#define CONFIG_MXC_GPIO
 #define CONFIG_MXC_UART
 
 /* SPI */
@@ -55,8 +48,6 @@
 #define CONFIG_MXC_SPI
 
 /* SPI Flash */
-#define CONFIG_SPI_FLASH
-#define CONFIG_SPI_FLASH_STMICRO
 
 #define TQMA6_SPI_FLASH_SECTOR_SIZE    SZ_64K
 
@@ -70,6 +61,8 @@
 #define CONFIG_CMD_I2C
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_I2C_MXC_I2C1                /* enable I2C bus 1 */
+#define CONFIG_SYS_I2C_MXC_I2C2                /* enable I2C bus 2 */
 #define CONFIG_SYS_I2C_MXC_I2C3                /* enable I2C bus 3 */
 #define CONFIG_I2C_MULTI_BUS
 #define CONFIG_SYS_I2C_SPEED           100000
@@ -95,15 +88,8 @@
 #define TQMA6_PFUZE100_I2C_BUS         2
 
 /* MMC Configs */
-#define CONFIG_FSL_ESDHC
-#define CONFIG_FSL_USDHC
 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
 
-#define CONFIG_MMC
-#define CONFIG_CMD_MMC
-#define CONFIG_GENERIC_MMC
-#define CONFIG_BOUNCE_BUFFER
-
 /* USB Configs */
 #define CONFIG_CMD_USB
 #define CONFIG_USB_EHCI
@@ -111,22 +97,13 @@
 #define CONFIG_USB_STORAGE
 #define CONFIG_USB_HOST_ETHER
 #define CONFIG_USB_ETHER_SMSC95XX
-#define CONFIG_MXC_USB_PORT    1
 #define CONFIG_MXC_USB_PORTSC  (PORT_PTS_UTMI | PORT_PTS_PTW)
-#define CONFIG_MXC_USB_FLAGS   0
-
-/* Fuses */
-#define CONFIG_MXC_OCOTP
-#define CONFIG_CMD_FUSE
-
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_FAT
-#define CONFIG_DOS_PARTITION
+#define CONFIG_USB_MAX_CONTROLLER_COUNT        2
+#define CONFIG_EHCI_HCD_INIT_AFTER_RESET       /* For OTG port */
 
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_DHCP
 #define CONFIG_CMD_MII
-#define CONFIG_CMD_NET
 
 #define CONFIG_FEC_MXC
 #define IMX_FEC_BASE                   ENET_BASE_ADDR
@@ -139,30 +116,8 @@
 #define CONFIG_TFTP_BLOCKSIZE  4096
 #define CONFIG_NFS_READ_SIZE   4096
 
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-#define CONFIG_CONS_INDEX              1
-#define CONFIG_BAUDRATE                        115200
-
 /* Command definition */
-#include <config_cmd_default.h>
-
 #define CONFIG_CMD_BMODE
-#define CONFIG_CMD_BOOTZ
-#define CONFIG_CMD_ITEST
-#define CONFIG_CMD_SETEXPR
-#undef CONFIG_CMD_IMLS
-
-#define CONFIG_BOOTDELAY               3
-
-#define CONFIG_LOADADDR                        0x12000000
-
-/* place code in last 4 MiB of RAM */
-#if defined(CONFIG_MX6DL) || defined(CONFIG_MX6S)
-#define CONFIG_SYS_TEXT_BASE           0x2fc00000
-#elif defined(CONFIG_MX6Q) || defined(CONFIG_MX6D)
-#define CONFIG_SYS_TEXT_BASE           0x4fc00000
-#endif
 
 #define CONFIG_ENV_SIZE                        (SZ_8K)
 /* Size of malloc() pool */
@@ -408,23 +363,6 @@
        "panicboot=echo No boot device !!! reset\0"                            \
        TQMA6_EXTRA_BOOTDEV_ENV_SETTINGS                                      \
 
-/* Miscellaneous configurable options */
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT_HUSH_PS2     "> "
-
-#define CONFIG_AUTO_COMPLETE
-#define CONFIG_SYS_CBSIZE              512
-
-/* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE              (CONFIG_SYS_CBSIZE + \
-                                        sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_MAXARGS             16
-#define CONFIG_SYS_BARGSIZE            CONFIG_SYS_CBSIZE
-
-#define CONFIG_SYS_LOAD_ADDR           CONFIG_LOADADDR
-
-#define CONFIG_CMDLINE_EDITING
 #define CONFIG_STACKSIZE               (128u * SZ_1K)
 
 /* Physical Memory Map */
@@ -440,18 +378,10 @@
 #define CONFIG_SYS_INIT_SP_ADDR \
        (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 
-/* FLASH and environment organization */
-#define CONFIG_SYS_NO_FLASH
-
-#define CONFIG_OF_LIBFDT
 #define CONFIG_OF_BOARD_SETUP
 #define CONFIG_FIT
 #define CONFIG_FIT_VERBOSE
 
-#ifndef CONFIG_SYS_DCACHE_OFF
-#define CONFIG_CMD_CACHE
-#endif
-
 /*
  * All the defines above are for the TQMa6 SoM
  *
@@ -459,6 +389,8 @@
  */
 #ifdef CONFIG_MBA6
 #include "tqma6_mba6.h"
+#elif CONFIG_WRU4
+#include "tqma6_wru4.h"
 #else
 #error "No baseboard for the TQMa6 defined!"
 #endif