flash: complete CONFIG_SYS_NO_FLASH move with renaming

[people/ms/u-boot.git] / include / configs / tricorder.h

diff --git a/include/configs/tricorder.h b/include/configs/tricorder.h
index ac7b31b895ad6fcd732c7e1dad3c746714090355..e4b3290268e77fbdbd3fc31b3e74eff9b5a06c38 100644 (file)
--- a/include/configs/tricorder.h
+++ b/include/configs/tricorder.h
@@ -19,7 +19,6 @@
 /* High Level Configuration Options */
 #define CONFIG_SYS_THUMB_BUILD
 #define CONFIG_OMAP                    /* in a TI OMAP core */
-#define CONFIG_OMAP_COMMON
 /* Common ARM Erratas */
 #define CONFIG_ARM_ERRATA_454179
 #define CONFIG_ARM_ERRATA_430973
@@ -39,8 +38,6 @@
 #include <asm/arch/cpu.h>              /* get chip and board defs */
 #include <asm/arch/omap.h>
 
-#define CONFIG_SILENT_CONSOLE
-
 /* Clock Defines */
 #define V_OSCK                         26000000 /* Clock output from T2 */
 #define V_SCLK                         (V_OSCK >> 1)
@@ -64,18 +61,6 @@
 #define CONFIG_OMAP3_GPIO_2            /* GPIO32..63 are in GPIO bank 2 */
 
 /* LED support */
-#define CONFIG_STATUS_LED
-#define CONFIG_BOARD_SPECIFIC_LED
-#define CONFIG_CMD_LED                 /* LED command */
-#define STATUS_LED_BIT                 (1 << 0)
-#define STATUS_LED_STATE               STATUS_LED_ON
-#define STATUS_LED_PERIOD              (CONFIG_SYS_HZ / 2)
-#define STATUS_LED_BIT1                        (1 << 1)
-#define STATUS_LED_STATE1              STATUS_LED_ON
-#define STATUS_LED_PERIOD1             (CONFIG_SYS_HZ / 2)
-#define STATUS_LED_BIT2                        (1 << 2)
-#define STATUS_LED_STATE2              STATUS_LED_ON
-#define STATUS_LED_PERIOD2             (CONFIG_SYS_HZ / 2)
 
 /* NS16550 Configuration */
 #define CONFIG_SYS_NS16550_SERIAL
@@ -90,12 +75,6 @@
 #define CONFIG_SYS_BAUDRATE_TABLE      {4800, 9600, 19200, 38400, 57600,\
                                        115200}
 
-/* MMC */
-#define CONFIG_GENERIC_MMC
-#define CONFIG_MMC
-#define CONFIG_OMAP_HSMMC
-#define CONFIG_DOS_PARTITION
-
 /* I2C */
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_OMAP24_I2C_SPEED    100000
@@ -113,7 +92,6 @@
 #define CONFIG_TWL4030_LED
 
 /* Board NAND Info */
-#define CONFIG_SYS_NO_FLASH            /* no NOR flash */
 #define CONFIG_MTD_DEVICE              /* needed for mtdparts commands */
 #define MTDIDS_DEFAULT                 "nand0=omap2-nand.0"
 #define MTDPARTS_DEFAULT               "mtdparts=omap2-nand.0:" \
@@ -317,10 +295,9 @@
 #define CONFIG_SPL_NAND_BASE
 #define CONFIG_SPL_NAND_DRIVERS
 #define CONFIG_SPL_NAND_ECC
-#define CONFIG_SPL_LDSCRIPT            "$(CPUDIR)/omap-common/u-boot-spl.lds"
+#define CONFIG_SPL_LDSCRIPT            "arch/arm/mach-omap2/u-boot-spl.lds"
 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME        "u-boot.img"
 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION     1
-#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */
 
 #define CONFIG_SPL_TEXT_BASE           0x40200000 /*CONFIG_SYS_SRAM_START*/
 #define CONFIG_SPL_MAX_SIZE            (SRAM_SCRATCH_SPACE_ADDR - \