flash: complete CONFIG_SYS_NO_FLASH move with renaming

[people/ms/u-boot.git] / include / configs / ts4800.h

diff --git a/include/configs/ts4800.h b/include/configs/ts4800.h
index fbca8a68ef2338b815a943a90aa225441fe98621..5649c18c4fd75dab5c19f740594379edecf92fef 100644 (file)
--- a/include/configs/ts4800.h
+++ b/include/configs/ts4800.h
@@ -16,11 +16,7 @@
 /* High Level Configuration Options */
 #define CONFIG_MX51
 
-#define CONFIG_DISPLAY_CPUINFO
-#define CONFIG_DISPLAY_BOARDINFO
-
-#define CONFIG_SYS_NO_FLASH            /* No NOR Flash */
-#define CONFIG_SKIP_LOWLEVEL_INIT      /* U-boot is a 2nd stage bootloader */
+#define CONFIG_SKIP_LOWLEVEL_INIT      /* U-Boot is a 2nd stage bootloader */
 
 #define CONFIG_HW_WATCHDOG
 
@@ -55,7 +51,6 @@
  * */
 #define CONFIG_HARD_SPI /* puts SPI: ready */
 #define CONFIG_MXC_SPI /* driver for the SPI controllers*/
-#define CONFIG_CMD_SPI /* SPI serial bus support */
 
 /*
  * MMC Configs
@@ -63,13 +58,6 @@
 #define CONFIG_FSL_ESDHC
 #define CONFIG_SYS_FSL_ESDHC_ADDR      MMC_SDHC1_BASE_ADDR
 
-#define CONFIG_MMC
-
-#define CONFIG_CMD_MMC
-#define CONFIG_GENERIC_MMC
-#define CONFIG_CMD_FAT
-#define CONFIG_DOS_PARTITION
-
 /*
  * Eth Configs
  */
@@ -82,10 +70,6 @@
 #define CONFIG_ETHPRIME                "FEC"
 #define CONFIG_FEC_MXC_PHYADDR 0
 
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_MII
-
 /* allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE           /* disable vendor parameters protection (serial#, ethaddr) */
 #define CONFIG_CONS_INDEX              1 /* use UART0 : used by serial driver */
@@ -95,30 +79,35 @@
  * Command definition
  ***********************************************************/
 
-#define CONFIG_CMD_BOOTZ
-#undef CONFIG_CMD_IMLS
-
 /* Environment variables */
 
-#define CONFIG_BOOTDELAY       1
 
 #define CONFIG_LOADADDR                0x91000000      /* loadaddr env var */
 
 #define CONFIG_EXTRA_ENV_SETTINGS \
        "script=boot.scr\0" \
-       "image=uImage\0" \
+       "image=zImage\0" \
+       "fdt_file=imx51-ts4800.dtb\0" \
+       "fdt_addr=0x90fe0000\0" \
        "mmcdev=0\0" \
-       "mmcpart=1\0" \
-       "mmcargs=setenv bootargs root=/dev/mmcblk0p2 rootwait rw\0" \
+       "mmcpart=2\0" \
+       "mmcroot=/dev/mmcblk0p3 rootwait rw\0" \
+       "mmcargs=setenv bootargs root=${mmcroot}\0" \
        "addtty=setenv bootargs ${bootargs} console=ttymxc0,${baudrate}\0" \
        "loadbootscript=" \
                "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
        "bootscript=echo Running bootscript from mmc ...; " \
                "source\0" \
        "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image};\0" \
+       "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
        "mmcboot=echo Booting from mmc ...; " \
                "run mmcargs addtty; " \
-                "bootm; "
+               "if run loadfdt; then " \
+                       "bootz ${loadaddr} - ${fdt_addr}; " \
+               "else " \
+                       "echo ERR: cannot load FDT; " \
+               "fi; "
+
 
 #define CONFIG_BOOTCOMMAND \
        "mmc dev ${mmcdev}; if mmc rescan; then " \
@@ -135,7 +124,6 @@
  * Miscellaneous configurable options
  */
 #define CONFIG_SYS_LONGHELP            /* undef to save memory */
-#define CONFIG_SYS_HUSH_PARSER         /* use "hush" command parser */
 #define CONFIG_AUTO_COMPLETE
 #define CONFIG_SYS_CBSIZE              256     /* Console I/O Buffer Size */
 /* Print Buffer Size */
@@ -158,8 +146,6 @@
 #define CONFIG_SYS_INIT_RAM_ADDR       (IRAM_BASE_ADDR)
 #define CONFIG_SYS_INIT_RAM_SIZE       (IRAM_SIZE)
 
-#define CONFIG_BOARD_EARLY_INIT_F
-
 #define CONFIG_SYS_INIT_SP_OFFSET \
        (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_ADDR \