Move setexpr to Kconfig

[people/ms/u-boot.git] / include / configs / udoo.h

diff --git a/include/configs/udoo.h b/include/configs/udoo.h
index 78df071795a10ef601772d427d12126fa3ab834d..3f8eaa6ca908b51223f507d039389ada4a874663 100644 (file)
--- a/include/configs/udoo.h
+++ b/include/configs/udoo.h
@@ -9,75 +9,67 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#include <asm/arch/imx-regs.h>
-#include <asm/imx-common/gpio.h>
-#include <asm/sizes.h>
-
-#define CONFIG_MX6
-#define CONFIG_DISPLAY_CPUINFO
-#define CONFIG_DISPLAY_BOARDINFO
+#include "mx6_common.h"
 
 #define MACH_TYPE_UDOO         4800
 #define CONFIG_MACH_TYPE       MACH_TYPE_UDOO
 
-#define CONFIG_CMDLINE_TAG
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_INITRD_TAG
-#define CONFIG_REVISION_TAG
-
 /* Size of malloc() pool */
 #define CONFIG_SYS_MALLOC_LEN          (2 * SZ_1M)
 
 #define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_MXC_GPIO
 
 #define CONFIG_MXC_UART
 #define CONFIG_MXC_UART_BASE           UART2_BASE
 
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-#define CONFIG_CONS_INDEX              1
-#define CONFIG_BAUDRATE                        115200
+/* SATA Configs */
 
-/* Command definition */
-#include <config_cmd_default.h>
+#define CONFIG_CMD_SATA
+#ifdef CONFIG_CMD_SATA
+#define CONFIG_DWC_AHSATA
+#define CONFIG_SYS_SATA_MAX_DEVICE     1
+#define CONFIG_DWC_AHSATA_PORT_ID      0
+#define CONFIG_DWC_AHSATA_BASE_ADDR    SATA_ARB_BASE_ADDR
+#define CONFIG_LBA48
+#define CONFIG_LIBATA
+#endif
 
-#undef CONFIG_CMD_IMLS
+/* Network support */
+
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NET
+#define CONFIG_FEC_MXC
+#define CONFIG_MII
+#define IMX_FEC_BASE                    ENET_BASE_ADDR
+#define CONFIG_FEC_XCV_TYPE             RGMII
+#define CONFIG_ETHPRIME                 "FEC"
+#define CONFIG_FEC_MXC_PHYADDR          6
+#define CONFIG_PHYLIB
+#define CONFIG_PHY_MICREL
+#define CONFIG_PHY_MICREL_KSZ9031
 
+/* Command definition */
 #define CONFIG_CMD_BMODE
-#define CONFIG_CMD_SETEXPR
-
-#define CONFIG_BOOTDELAY               3
 
 #define CONFIG_SYS_MEMTEST_START       0x10000000
 #define CONFIG_SYS_MEMTEST_END         (CONFIG_SYS_MEMTEST_START + 500 * SZ_1M)
-#define CONFIG_LOADADDR                        0x12000000
-#define CONFIG_SYS_TEXT_BASE           0x17800000
 
 /* MMC Configuration */
-#define CONFIG_FSL_ESDHC
-#define CONFIG_FSL_USDHC
 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
 
-#define CONFIG_MMC
-#define CONFIG_CMD_MMC
-#define CONFIG_GENERIC_MMC
-#define CONFIG_BOUNCE_BUFFER
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_FAT
-#define CONFIG_DOS_PARTITION
-
 #define CONFIG_DEFAULT_FDT_FILE                "imx6q-udoo.dtb"
 
 #define CONFIG_EXTRA_ENV_SETTINGS \
        "script=boot.scr\0" \
-       "uimage=uImage\0" \
+       "image=zImage\0" \
        "console=ttymxc1\0" \
        "splashpos=m,m\0" \
        "fdt_high=0xffffffff\0" \
        "initrd_high=0xffffffff\0" \
        "fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
-       "fdt_addr=0x11000000\0" \
+       "fdt_addr=0x18000000\0" \
        "boot_fdt=try\0" \
        "ip_dyn=yes\0" \
        "mmcdev=0\0" \
@@ -103,22 +95,22 @@
                "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
        "bootscript=echo Running bootscript from mmc ...; " \
                "source\0" \
-       "loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \
+       "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
        "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
        "mmcboot=echo Booting from mmc ...; " \
                "run mmcargs; " \
                "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
                        "if run loadfdt; then " \
-                               "bootm ${loadaddr} - ${fdt_addr}; " \
+                               "bootz ${loadaddr} - ${fdt_addr}; " \
                        "else " \
                                "if test ${boot_fdt} = try; then " \
-                                       "bootm; " \
+                                       "bootz; " \
                                "else " \
                                        "echo WARN: Cannot load the DT; " \
                                "fi; " \
                        "fi; " \
                "else " \
-                       "bootm; " \
+                       "bootz; " \
                "fi;\0" \
        "netargs=setenv bootargs console=${console},${baudrate} " \
                "root=/dev/nfs " \
@@ -130,19 +122,19 @@
                "else " \
                        "setenv get_cmd tftp; " \
                "fi; " \
-               "${get_cmd} ${uimage}; " \
+               "${get_cmd} ${image}; " \
                "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
                        "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
-                               "bootm ${loadaddr} - ${fdt_addr}; " \
+                               "bootz ${loadaddr} - ${fdt_addr}; " \
                        "else " \
                                "if test ${boot_fdt} = try; then " \
-                                       "bootm; " \
+                                       "bootz; " \
                                "else " \
                                        "echo WARN: Cannot load the DT; " \
                                "fi; " \
                        "fi; " \
                "else " \
-                       "bootm; " \
+                       "bootz; " \
                "fi;\0"
 
 #define CONFIG_BOOTCOMMAND \
@@ -150,29 +142,15 @@
                   "if run loadbootscript; then " \
                           "run bootscript; " \
                   "else " \
-                          "if run loaduimage; then " \
+                          "if run loadimage; then " \
                                   "run mmcboot; " \
                           "else run netboot; " \
                           "fi; " \
                   "fi; " \
           "else run netboot; fi"
 
-/* Miscellaneous configurable options */
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT             "=> "
-#define CONFIG_AUTO_COMPLETE
-#define CONFIG_SYS_CBSIZE              256
-
 /* Print Buffer Size */
 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_MAXARGS            16
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
-
-#define CONFIG_SYS_LOAD_ADDR           CONFIG_LOADADDR
-#define CONFIG_SYS_HZ                  1000
-
-#define CONFIG_CMDLINE_EDITING
 
 /* Physical Memory Map */
 #define CONFIG_NR_DRAM_BANKS           1
@@ -187,20 +165,11 @@
 #define CONFIG_SYS_INIT_SP_ADDR \
        (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 
-/* FLASH and environment organization */
-#define CONFIG_SYS_NO_FLASH
-
+/* Environment organization */
 #define CONFIG_ENV_SIZE                        (8 * 1024)
 
 #define CONFIG_ENV_IS_IN_MMC
 #define CONFIG_ENV_OFFSET              (6 * 64 * 1024)
 #define CONFIG_SYS_MMC_ENV_DEV         0
 
-#define CONFIG_OF_LIBFDT
-#define CONFIG_CMD_BOOTZ
-
-#ifndef CONFIG_SYS_DCACHE_OFF
-#define CONFIG_CMD_CACHE
-#endif
-
 #endif                        /* __CONFIG_H * */