config: Move CONFIG_BOARD_LATE_INIT to defconfigs

[people/ms/u-boot.git] / include / configs / uniphier.h

diff --git a/include/configs/uniphier.h b/include/configs/uniphier.h
index 0f5b20ff48c4ec4dd28fb32a2b5b670b08ad33d3..ee86663e6bfaa2736458d3e29490bbc56086ecf4 100644 (file)
--- a/include/configs/uniphier.h
+++ b/include/configs/uniphier.h
@@ -11,17 +11,10 @@
 #ifndef __CONFIG_UNIPHIER_COMMON_H__
 #define __CONFIG_UNIPHIER_COMMON_H__
 
-#define CONFIG_ARMV7_PSCI
-#define CONFIG_ARMV7_PSCI_NR_CPUS   4
+#define CONFIG_ARMV7_PSCI_1_0
 
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS  10
 
-#define CONFIG_SMC911X
-
-/* dummy: referenced by examples/standalone/smc911x_eeprom.c */
-#define CONFIG_SMC911X_BASE    0
-#define CONFIG_SMC911X_32_BIT
-
 /*-----------------------------------------------------------------------
  * MMU and Cache Setting
  *----------------------------------------------------------------------*/
@@ -30,19 +23,6 @@
 /* #define CONFIG_SYS_ICACHE_OFF */
 /* #define CONFIG_SYS_DCACHE_OFF */
 
-#ifdef CONFIG_CACHE_UNIPHIER
-#define CONFIG_SYS_CACHELINE_SIZE      128
-#else
-#define CONFIG_SYS_CACHELINE_SIZE      32
-#endif
-
-#define CONFIG_DISPLAY_CPUINFO
-#define CONFIG_DISPLAY_BOARDINFO
-#define CONFIG_MISC_INIT_F
-#define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_BOARD_EARLY_INIT_R
-#define CONFIG_BOARD_LATE_INIT
-
 #define CONFIG_SYS_MALLOC_LEN          (4 * 1024 * 1024)
 
 #define CONFIG_TIMESTAMP
@@ -50,10 +30,15 @@
 /* FLASH related */
 #define CONFIG_MTD_DEVICE
 
-/*
- * uncomment the following to disable FLASH related code.
- */
-/* #define CONFIG_SYS_NO_FLASH */
+#define CONFIG_SMC911X_32_BIT
+/* dummy: referenced by examples/standalone/smc911x_eeprom.c */
+#define CONFIG_SMC911X_BASE    0
+
+#ifdef CONFIG_MICRO_SUPPORT_CARD
+#define CONFIG_SMC911X
+#else
+#define CONFIG_SYS_NO_FLASH
+#endif
 
 #define CONFIG_FLASH_CFI_DRIVER
 #define CONFIG_SYS_FLASH_CFI
@@ -64,7 +49,7 @@
 #define CONFIG_SYS_FLASH_BASE          0
 
 /*
- * flash_toggle does not work for out supoort card.
+ * flash_toggle does not work for our support card.
  * We need to use flash_status_poll.
  */
 #define CONFIG_SYS_CFI_FLASH_STATUS_POLL
@@ -76,11 +61,6 @@
 /* serial console configuration */
 #define CONFIG_BAUDRATE                        115200
 
-#if !defined(CONFIG_SPL_BUILD) && !defined(CONFIG_ARM64)
-#define CONFIG_USE_ARCH_MEMSET
-#define CONFIG_USE_ARCH_MEMCPY
-#endif
-
 #define CONFIG_SYS_LONGHELP            /* undef to save memory */
 
 #define CONFIG_CMDLINE_EDITING         /* add command line history     */
@@ -139,7 +119,6 @@
 #define CONFIG_SYS_NAND_BAD_BLOCK_POS                  0
 
 /* USB */
-#define CONFIG_USB_MAX_CONTROLLER_COUNT                2
 #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS     4
 #define CONFIG_FAT_WRITE
 #define CONFIG_DOS_PARTITION
@@ -284,25 +263,16 @@
 #define CONFIG_PANIC_HANG
 
 #define CONFIG_SPL_FRAMEWORK
-#define CONFIG_SPL_SERIAL_SUPPORT
-#define CONFIG_SPL_NOR_SUPPORT
 #ifdef CONFIG_ARM64
 #define CONFIG_SPL_BOARD_LOAD_IMAGE
-#else
-#define CONFIG_SPL_NAND_SUPPORT
-#define CONFIG_SPL_MMC_SUPPORT
 #endif
 
-#define CONFIG_SPL_LIBCOMMON_SUPPORT   /* for mem_malloc_init */
-#define CONFIG_SPL_LIBGENERIC_SUPPORT
-
 #define CONFIG_SPL_BOARD_INIT
 
 #define CONFIG_SYS_NAND_U_BOOT_OFFS            0x10000
 
 /* subtract sizeof(struct image_header) */
 #define CONFIG_SYS_UBOOT_BASE                  (0x60000 - 0x40)
-#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR        0x80
 
 #define CONFIG_SPL_TARGET                      "u-boot-with-spl.bin"
 #define CONFIG_SPL_MAX_FOOTPRINT               0x10000