Convert CONFIG_BOOTP_BOOTPATH et al to Kconfig

[people/ms/u-boot.git] / include / configs / usb_a9263.h

diff --git a/include/configs/usb_a9263.h b/include/configs/usb_a9263.h
index 075d9c990beaab7284580feb6af98a922a90b5b5..c8cbd34cdb18559ad67e9ea4978afed0e2acde19 100644 (file)
--- a/include/configs/usb_a9263.h
+++ b/include/configs/usb_a9263.h
@@ -31,32 +31,13 @@
 
 #define CONFIG_SKIP_LOWLEVEL_INIT
 
-#define CONFIG_SYS_TEXT_BASE           0x23f00000
-
 /*
  * Hardware drivers
  */
-#define CONFIG_AT91_GPIO
-
-/* serial console */
-#define CONFIG_ATMEL_USART
-#define CONFIG_USART_BASE              ATMEL_BASE_DBGU
-#define CONFIG_USART_ID                        ATMEL_ID_SYS
-#define CONFIG_BAUDRATE                        115200
-
-
 /*
  * BOOTP options
  */
 #define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-/*
- * Command line configuration.
- */
-#define CONFIG_CMD_NAND
 
 /* SDRAM */
 #define CONFIG_NR_DRAM_BANKS           1
@@ -64,19 +45,7 @@
 #define CONFIG_SYS_SDRAM_SIZE          0x04000000
 
 #define CONFIG_SYS_INIT_SP_ADDR \
-       (ATMEL_BASE_SRAM1 + 0x1000 - GENERATED_GBL_DATA_SIZE)
-
-/* DataFlash */
-#define CONFIG_ATMEL_DATAFLASH_SPI
-#define CONFIG_HAS_DATAFLASH
-#define CONFIG_SYS_MAX_DATAFLASH_BANKS         1
-#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0    0xC0000000
-#define AT91_SPI_CLK                           8000000
-#define DATAFLASH_TCSS                         (0x1a << 16)
-#define DATAFLASH_TCHS                         (0x1 << 24)
-
-/* no NOR flash */
-#define CONFIG_SYS_NO_FLASH
+       (ATMEL_BASE_SRAM1 + 16 * 1024 - GENERATED_GBL_DATA_SIZE)
 
 /* NAND flash */
 #ifdef CONFIG_CMD_NAND
@@ -91,9 +60,6 @@
 #define CONFIG_SYS_NAND_READY_PIN              GPIO_PIN_PA(22)
 #endif
 
-#define MTDPARTS_DEFAULT \
-       "mtdparts=atmel_nand:16m(kernel)ro,120m(root1),-(root2)"
-
 /* Ethernet */
 #define CONFIG_MACB
 #define CONFIG_RMII
@@ -104,7 +70,6 @@
 #ifdef CONFIG_CMD_USB
 #define CONFIG_USB_ATMEL
 #define CONFIG_USB_OHCI_NEW
-#define CONFIG_DOS_PARTITION
 #define CONFIG_SYS_USB_OHCI_CPU_INIT
 #define CONFIG_SYS_USB_OHCI_REGS_BASE          0x00a00000
 #define CONFIG_SYS_USB_OHCI_SLOT_NAME          "at91sam9263"
@@ -116,28 +81,14 @@
 #define CONFIG_SYS_MEMTEST_START               CONFIG_SYS_SDRAM_BASE
 #define CONFIG_SYS_MEMTEST_END                 0x23e00000
 
-/* bootstrap + u-boot + env in dataflash on CS0 */
-#define CONFIG_ENV_IS_IN_DATAFLASH
-#define CONFIG_SYS_MONITOR_BASE        (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + 0x4000)
+/* bootstrap + u-boot + env + linux in dataflash on CS0 */
 #define CONFIG_ENV_OFFSET      0x2000
-#define CONFIG_ENV_ADDR                (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + \
-                                CONFIG_ENV_OFFSET)
 #define CONFIG_ENV_SIZE                0x2000
+#define CONFIG_ENV_SECT_SIZE   CONFIG_ENV_SIZE
+#define CONFIG_ENV_SPI_MAX_HZ  15000000
 #define CONFIG_BOOTCOMMAND     "nboot 21000000 0"
-#define CONFIG_BOOTARGS                "console=ttyS0,115200 " \
-       "root=/dev/mtdblock1 " \
-       "mtdparts=" MTDPARTS_DEFAULT " " \
-       "rw rootfstype=jffs2"
 #define CONFIG_EXTRA_ENV_SETTINGS \
-       "mtdparts=" MTDPARTS_DEFAULT "\0" \
-
-#define CONFIG_SYS_CBSIZE              256
-#define CONFIG_SYS_MAXARGS             16
-#define CONFIG_SYS_PBSIZE              (CONFIG_SYS_CBSIZE + \
-                                        sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_CMDLINE_EDITING
-#define CONFIG_AUTO_COMPLETE
-#define CONFIG_SYS_LONGHELP
+       "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
 
 /*
  * Size of malloc() pool