Convert CONFIG_BOOTP_BOOTPATH et al to Kconfig

[people/ms/u-boot.git] / include / configs / vct.h

diff --git a/include/configs/vct.h b/include/configs/vct.h
index 80f6a60d84f908f016bb1f5598604cb5ccfe08ec..21682795ebb625fbf6f90c90717410fe165c802c 100644 (file)
--- a/include/configs/vct.h
+++ b/include/configs/vct.h
@@ -25,8 +25,6 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#define CONFIG_DISPLAY_BOARDINFO
-
 #define CPU_CLOCK_RATE                 324000000 /* Clock for the MIPS core */
 #define CONFIG_SYS_MIPS_TIMER_FREQ     (CPU_CLOCK_RATE / 2)
 
@@ -40,8 +38,6 @@
 
 #if !defined(CONFIG_VCT_NAND) && !defined(CONFIG_VCT_ONENAND)
 #define CONFIG_VCT_NOR
-#else
-#define CONFIG_SYS_NO_FLASH
 #endif
 
 /*
@@ -54,12 +50,10 @@
 #endif
 
 #define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_REG_SIZE    -4
 #define CONFIG_SYS_NS16550_COM1                UART_1_BASE
 #define CONFIG_CONS_INDEX              1
 #define CONFIG_SYS_NS16550_CLK         921600
-#define CONFIG_BAUDRATE                        115200
 
 /*
  * SDRAM
@@ -71,52 +65,17 @@
 #define CONFIG_SYS_LOAD_ADDR           0x80400000      /* default load address */
 
 #if defined(CONFIG_VCT_PREMIUM) || defined(CONFIG_VCT_PLATINUM)
-/*
- * SMSC91C11x Network Card
- */
-#define CONFIG_SMC911X
-#define CONFIG_SMC911X_BASE    0x00000000
-#define CONFIG_SMC911X_32_BIT
 #define CONFIG_NET_RETRY_COUNT         20
 #endif
 
 /*
  * Commands
  */
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_ELF
-#define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_I2C
-
-/*
- * Only Premium/Platinum have ethernet support right now
- */
-#if (defined(CONFIG_VCT_PREMIUM) || defined(CONFIG_VCT_PLATINUM)) && \
-       !defined(CONFIG_VCT_SMALL_IMAGE)
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_SNTP
-#endif
-
-/*
- * Only Premium/Platinum have USB-EHCI support right now
- */
-#if (defined(CONFIG_VCT_PREMIUM) || defined(CONFIG_VCT_PLATINUM)) && \
-       !defined(CONFIG_VCT_SMALL_IMAGE)
-#define CONFIG_CMD_USB
-#define CONFIG_CMD_FAT
-#endif
-
 #if defined(CONFIG_CMD_USB)
-#define CONFIG_USB_STORAGE
-#define CONFIG_DOS_PARTITION
-#define CONFIG_ISO_PARTITION
-
-#define CONFIG_SUPPORT_VFAT
 
 /*
  * USB/EHCI
  */
-#define CONFIG_USB_EHCI                        /* Enable EHCI USB support      */
 #define CONFIG_USB_EHCI_VCT            /* on VCT platform              */
 #define CONFIG_EHCI_MMIO_BIG_ENDIAN
 #define CONFIG_EHCI_DESC_BIG_ENDIAN
@@ -124,40 +83,21 @@
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* re-init HCD after CMD_RESET */
 #endif /* CONFIG_CMD_USB */
 
-#if defined(CONFIG_VCT_NAND)
-#define CONFIG_CMD_NAND
-#endif
-
-#if defined(CONFIG_VCT_ONENAND)
-#define CONFIG_CMD_ONENAND
-#endif
-
 /*
  * BOOTP options
  */
 #define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_SUBNETMASK
 
 /*
  * Miscellaneous configurable options
  */
-#define CONFIG_SYS_LONGHELP                    /* undef to save memory         */
 #define CONFIG_SYS_CBSIZE      512             /* Console I/O Buffer Size      */
-#define CONFIG_SYS_PBSIZE      (CONFIG_SYS_CBSIZE + \
-                                sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_MAXARGS     16              /* max number of command args   */
 #define CONFIG_TIMESTAMP                       /* Print image info with timestamp */
-#define CONFIG_CMDLINE_EDITING                 /* add command line history     */
-#define CONFIG_SYS_CONSOLE_INFO_QUIET          /* don't print console @ startup*/
 
 /*
  * FLASH and environment organization
  */
 #if defined(CONFIG_VCT_NOR)
-#define CONFIG_ENV_IS_IN_FLASH
 #define CONFIG_FLASH_NOT_MEM_MAPPED
 
 /*
@@ -204,20 +144,12 @@
 
 #if defined(CONFIG_VCT_ONENAND)
 #define CONFIG_USE_ONENAND_BOARD_INIT
-#define        CONFIG_ENV_IS_IN_ONENAND
 #define        CONFIG_SYS_ONENAND_BASE         0x00000000      /* this is not real address */
 #define CONFIG_SYS_FLASH_BASE          0x00000000
 #define CONFIG_ENV_ADDR                        (128 << 10)     /* after compr. U-Boot image */
 #define        CONFIG_ENV_SIZE                 (128 << 10)     /* erase size */
 #endif /* CONFIG_VCT_ONENAND */
 
-/*
- * Cache Configuration
- */
-#define CONFIG_SYS_DCACHE_SIZE         16384
-#define CONFIG_SYS_ICACHE_SIZE         16384
-#define CONFIG_SYS_CACHELINE_SIZE      32
-
 /*
  * I2C/EEPROM
  */
@@ -255,25 +187,13 @@ int vct_gpio_get(int pin);
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS  10   /* and takes up to 10 msec */
 
 #define CONFIG_BOOTCOMMAND     "run test3"
-#define CONFIG_BOOTDELAY       5       /* autoboot after 5 seconds     */
 
 /*
  * UBI configuration
  */
 #if defined(CONFIG_VCT_ONENAND)
-#define CONFIG_SYS_USE_UBI
-#define        CONFIG_CMD_JFFS2
-#define        CONFIG_CMD_UBI
-#define        CONFIG_RBTREE
 #define CONFIG_MTD_DEVICE              /* needed for mtdparts commands */
 #define CONFIG_MTD_PARTITIONS
-#define CONFIG_CMD_MTDPARTS
-
-#define MTDIDS_DEFAULT         "onenand0=onenand"
-#define MTDPARTS_DEFAULT       "mtdparts=onenand:128k(u-boot),"        \
-                                       "128k(env),"            \
-                                       "20m(kernel),"          \
-                                       "-(rootfs)"
 #endif
 
 /*
@@ -282,30 +202,8 @@ int vct_gpio_get(int pin);
  * (NOR/OneNAND) usage and Linux kernel booting.
  */
 #if defined(CONFIG_VCT_SMALL_IMAGE)
-#undef CONFIG_CMD_ASKENV
-#undef CONFIG_CMD_BEDBUG
-#undef CONFIG_CMD_CACHE
-#undef CONFIG_CMD_DHCP
-#undef CONFIG_CMD_EEPROM
-#undef CONFIG_CMD_EEPROM
-#undef CONFIG_CMD_ELF
-#undef CONFIG_CMD_FAT
-#undef CONFIG_CMD_I2C
-#undef CONFIG_CMD_I2C
-#undef CONFIG_CMD_IRQ
-#undef CONFIG_CMD_LOADY
-#undef CONFIG_CMD_MII
-#undef CONFIG_CMD_PING
-#undef CONFIG_CMD_REGINFO
-#undef CONFIG_CMD_SNTP
-#undef CONFIG_CMD_STRINGS
-#undef CONFIG_CMD_TERMINAL
-#undef CONFIG_CMD_USB
-
-#undef CONFIG_SMC911X
 #undef CONFIG_SYS_I2C_SOFT
 #undef CONFIG_SOURCE
-#undef CONFIG_SYS_LONGHELP
 #undef CONFIG_TIMESTAMP
 #endif /* CONFIG_VCT_SMALL_IMAGE */