configs: Re-sync with cmd/Kconfig

[people/ms/u-boot.git] / include / configs / ve8313.h

diff --git a/include/configs/ve8313.h b/include/configs/ve8313.h
index a4b4732ce5ff6aa9f384f0c8a0d9148abc540596..2425ebf66933aeb10aa3a7e3f15086a72260a4ab 100644 (file)
--- a/include/configs/ve8313.h
+++ b/include/configs/ve8313.h
@@ -4,7 +4,7 @@
  * (C) Copyright 2010
  * Heiko Schocher, DENX Software Engineering, hs@denx.de.
  *
- * SPDX-License-Identifier:    GPL-2.0+ 
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 /*
  * ve8313 board configuration file
@@ -13,11 +13,12 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#define CONFIG_DISPLAY_BOARDINFO
+
 /*
  * High Level Configuration Options
  */
 #define CONFIG_E300            1
-#define CONFIG_MPC83xx         1
 #define CONFIG_MPC831x         1
 #define CONFIG_MPC8313         1
 #define CONFIG_VE8313          1
@@ -184,7 +185,6 @@
  */
 #define CONFIG_SYS_NAND_BASE           0x61000000
 #define CONFIG_SYS_MAX_NAND_DEVICE     1
-#define CONFIG_MTD_NAND_VERIFY_WRITE
 #define CONFIG_CMD_NAND 1
 #define CONFIG_NAND_FSL_ELBC 1
 #define CONFIG_SYS_NAND_BLOCK_SIZE 16384
@@ -242,16 +242,10 @@
                                | OR_GPCM_EAD)
                                /* 0xfe0009f7 */
 
-/* pass open firmware flat tree */
-#define CONFIG_OF_LIBFDT       1
-#define CONFIG_OF_BOARD_SETUP  1
-#define CONFIG_OF_STDOUT_VIA_ALIAS     1
-
 /*
  * Serial Port
  */
 #define CONFIG_CONS_INDEX      1
-#define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE    1
 #define CONFIG_SYS_NS16550_CLK         get_bus_freq(0)
@@ -262,9 +256,6 @@
 #define CONFIG_SYS_NS16550_COM1        (CONFIG_SYS_IMMR+0x4500)
 #define CONFIG_SYS_NS16550_COM2        (CONFIG_SYS_IMMR+0x4600)
 
-/* Use the HUSH parser */
-#define CONFIG_SYS_HUSH_PARSER
-
 #if defined(CONFIG_PCI)
 /*
  * General PCI
@@ -289,7 +280,6 @@
  */
 #define CONFIG_TSEC_ENET               /* TSEC ethernet support */
 
-
 #define CONFIG_TSEC1
 #ifdef CONFIG_TSEC1
 #define CONFIG_HAS_ETH0
@@ -330,11 +320,6 @@
 /*
  * Command line configuration.
  */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_PING
 #define CONFIG_CMD_PCI
 
 #define CONFIG_CMDLINE_EDITING 1
@@ -345,13 +330,11 @@
  */
 #define CONFIG_SYS_LONGHELP                    /* undef to save memory */
 #define CONFIG_SYS_LOAD_ADDR   0x100000        /* default load address */
-#define CONFIG_SYS_PROMPT      "=> "           /* Monitor Command Prompt */
 #define CONFIG_SYS_CBSIZE      1024            /* Console I/O Buffer Size */
 
 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
 #define CONFIG_SYS_MAXARGS     16              /* max number of cmd args */
 #define CONFIG_SYS_BARGSIZE    CONFIG_SYS_CBSIZE /* Boot arg Buffer size */
-#define CONFIG_SYS_HZ          1000            /* 1ms ticks */
 
 /*
  * For booting Linux, the board info and command line data