Convert CONFIG_BOOTP_BOOTPATH et al to Kconfig

[people/ms/u-boot.git] / include / configs / ve8313.h

diff --git a/include/configs/ve8313.h b/include/configs/ve8313.h
index 00787bbb281c749d6348ca132ec201f42e05b786..580a08b0d38ffe8de3778aa388ea557e4e4a448d 100644 (file)
--- a/include/configs/ve8313.h
+++ b/include/configs/ve8313.h
@@ -19,18 +19,10 @@
 #define CONFIG_E300            1
 #define CONFIG_MPC831x         1
 #define CONFIG_MPC8313         1
-#define CONFIG_VE8313          1
 
-#ifndef CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_TEXT_BASE   0xfe000000
-#endif
-
-#define CONFIG_PCI             1
 #define CONFIG_PCI_INDIRECT_BRIDGE 1
 #define CONFIG_FSL_ELBC                1
 
-#define CONFIG_BOARD_EARLY_INIT_F      1
-
 /*
  * On-board devices
  *
@@ -183,8 +175,6 @@
  */
 #define CONFIG_SYS_NAND_BASE           0x61000000
 #define CONFIG_SYS_MAX_NAND_DEVICE     1
-#define CONFIG_MTD_NAND_VERIFY_WRITE
-#define CONFIG_CMD_NAND 1
 #define CONFIG_NAND_FSL_ELBC 1
 #define CONFIG_SYS_NAND_BLOCK_SIZE 16384
 
@@ -241,16 +231,10 @@
                                | OR_GPCM_EAD)
                                /* 0xfe0009f7 */
 
-/* pass open firmware flat tree */
-#define CONFIG_OF_LIBFDT       1
-#define CONFIG_OF_BOARD_SETUP  1
-#define CONFIG_OF_STDOUT_VIA_ALIAS     1
-
 /*
  * Serial Port
  */
 #define CONFIG_CONS_INDEX      1
-#define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE    1
 #define CONFIG_SYS_NS16550_CLK         get_bus_freq(0)
@@ -261,9 +245,6 @@
 #define CONFIG_SYS_NS16550_COM1        (CONFIG_SYS_IMMR+0x4500)
 #define CONFIG_SYS_NS16550_COM2        (CONFIG_SYS_IMMR+0x4600)
 
-/* Use the HUSH parser */
-#define CONFIG_SYS_HUSH_PARSER
-
 #if defined(CONFIG_PCI)
 /*
  * General PCI
@@ -279,7 +260,6 @@
 #define CONFIG_SYS_PCI1_IO_PHYS                0xE2000000
 #define CONFIG_SYS_PCI1_IO_SIZE                0x00100000      /* 1M */
 
-#define CONFIG_PCI_PNP         /* do pci plug-and-play */
 #define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1957  /* Freescale */
 #endif
 
@@ -288,7 +268,6 @@
  */
 #define CONFIG_TSEC_ENET               /* TSEC ethernet support */
 
-
 #define CONFIG_TSEC1
 #ifdef CONFIG_TSEC1
 #define CONFIG_HAS_ETH0
@@ -305,7 +284,6 @@
 /*
  * Environment
  */
-#define CONFIG_ENV_IS_IN_FLASH 1
 #define CONFIG_ENV_ADDR                \
                        (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_MONITOR_LEN)
 #define CONFIG_ENV_SECT_SIZE   0x20000 /* 128K(one sector) for env */
@@ -322,32 +300,17 @@
  * BOOTP options
  */
 #define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
 
 /*
  * Command line configuration.
  */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_PCI
-
-#define CONFIG_CMDLINE_EDITING 1
-#define CONFIG_AUTO_COMPLETE   /* add autocompletion support   */
 
 /*
  * Miscellaneous configurable options
  */
-#define CONFIG_SYS_LONGHELP                    /* undef to save memory */
 #define CONFIG_SYS_LOAD_ADDR   0x100000        /* default load address */
 #define CONFIG_SYS_CBSIZE      1024            /* Console I/O Buffer Size */
 
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
-#define CONFIG_SYS_MAXARGS     16              /* max number of cmd args */
 #define CONFIG_SYS_BARGSIZE    CONFIG_SYS_CBSIZE /* Boot arg Buffer size */
 
 /*
@@ -479,9 +442,6 @@
 #define CONFIG_HOSTNAME                ve8313
 #define CONFIG_UBOOTPATH       ve8313/u-boot.bin
 
-#define CONFIG_BOOTDELAY       6       /* -1 disables auto-boot */
-#define CONFIG_BAUDRATE                115200
-
 #define CONFIG_EXTRA_ENV_SETTINGS \
        "netdev=" __stringify(CONFIG_NETDEV) "\0"                       \
        "ethprime=" __stringify(CONFIG_TSEC1_NAME) "\0"                 \