#ifndef __VEXPRESS_AEMV8A_H
#define __VEXPRESS_AEMV8A_H
-/* We use generic board and device manager for v8 Versatile Express */
-#define CONFIG_SYS_GENERIC_BOARD
-
#ifdef CONFIG_TARGET_VEXPRESS64_BASE_FVP
#ifndef CONFIG_SEMIHOSTING
#error CONFIG_TARGET_VEXPRESS64_BASE_FVP requires CONFIG_SEMIHOSTING
#define CONFIG_REMAKE_ELF
-#define CONFIG_SUPPORT_RAW_INITRD
-
-/* Cache Definitions */
-#define CONFIG_SYS_DCACHE_OFF
-#define CONFIG_SYS_ICACHE_OFF
-
-#define CONFIG_IDENT_STRING " vexpress_aemv8a"
-#define CONFIG_BOOTP_VCI_STRING "U-boot.armv8.vexpress_aemv8a"
-
/* Link Definitions */
#if defined(CONFIG_TARGET_VEXPRESS64_BASE_FVP) || \
defined(CONFIG_TARGET_VEXPRESS64_BASE_FVP_DRAM)
/* ATF loads u-boot here for BASE_FVP model */
-#define CONFIG_SYS_TEXT_BASE 0x88000000
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x03f00000)
#elif CONFIG_TARGET_VEXPRESS64_JUNO
-#define CONFIG_SYS_TEXT_BASE 0xe0000000
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x7fff0)
-#else
-#error "Unknown board variant"
#endif
#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */
-/* Flat Device Tree Definitions */
-#define CONFIG_OF_LIBFDT
-
/* CS register bases for the original memory map. */
#define V2M_PA_CS0 0x00000000
#define V2M_PA_CS1 0x14000000
#elif CONFIG_TARGET_VEXPRESS64_JUNO
#define GICD_BASE (0x2C010000)
#define GICC_BASE (0x2C02f000)
-#else
-#error "Unknown board variant"
#endif
#endif /* !CONFIG_GICV3 */
/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (8 << 20))
-/* Ethernet Configuration */
-#ifdef CONFIG_TARGET_VEXPRESS64_JUNO
-/* The real hardware Versatile express uses SMSC9118 */
-#define CONFIG_SMC911X 1
-#define CONFIG_SMC911X_32_BIT 1
-#define CONFIG_SMC911X_BASE (0x018000000)
-#else
+#ifndef CONFIG_TARGET_VEXPRESS64_JUNO
/* The Vexpress64 simulators use SMSC91C111 */
#define CONFIG_SMC91111 1
#define CONFIG_SMC91111_BASE (0x01A000000)
#endif
/* PL011 Serial Configuration */
-#define CONFIG_BAUDRATE 115200
#define CONFIG_CONS_INDEX 0
-#define CONFIG_PL01X_SERIAL
-#define CONFIG_PL011_SERIAL
#ifdef CONFIG_TARGET_VEXPRESS64_JUNO
#define CONFIG_PL011_CLOCK 7273800
#else
#define CONFIG_PL011_CLOCK 24000000
#endif
-/* Command line configuration */
-#define CONFIG_MENU
/*#define CONFIG_MENU_SHOW*/
-#define CONFIG_CMD_CACHE
-#define CONFIG_CMD_BOOTI
-#define CONFIG_CMD_UNZIP
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_PXE
-#define CONFIG_CMD_ENV
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_FAT
-#define CONFIG_DOS_PARTITION
/* BOOTP options */
#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_PXE
-#define CONFIG_BOOTP_PXE_CLIENTARCH 0x100
/* Miscellaneous configurable options */
#define CONFIG_SYS_LOAD_ADDR (V2M_BASE + 0x10000000)
/* Physical Memory Map */
-#define CONFIG_NR_DRAM_BANKS 1
#define PHYS_SDRAM_1 (V2M_BASE) /* SDRAM Bank #1 */
/* Top 16MB reserved for secure world use */
#define DRAM_SEC_SIZE 0x01000000
#define PHYS_SDRAM_1_SIZE 0x80000000 - DRAM_SEC_SIZE
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
+#ifdef CONFIG_TARGET_VEXPRESS64_JUNO
+#define CONFIG_NR_DRAM_BANKS 2
+#define PHYS_SDRAM_2 (0x880000000)
+#define PHYS_SDRAM_2_SIZE 0x180000000
+#else
+#define CONFIG_NR_DRAM_BANKS 1
+#endif
+
/* Enable memtest */
-#define CONFIG_CMD_MEMTEST
#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM_1
#define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM_1 + PHYS_SDRAM_1_SIZE)
* be copied into DRAM
*/
#define CONFIG_EXTRA_ENV_SETTINGS \
- "kernel_name=Image\0" \
- "kernel_addr=0x80000000\0" \
+ "kernel_name=norkern\0" \
+ "kernel_alt_name=Image\0" \
+ "kernel_addr=0x80080000\0" \
"initrd_name=ramdisk.img\0" \
"initrd_addr=0x84000000\0" \
- "fdt_name=juno\0" \
+ "fdtfile=board.dtb\0" \
+ "fdt_alt_name=juno\0" \
"fdt_addr=0x83000000\0" \
"fdt_high=0xffffffffffffffff\0" \
"initrd_high=0xffffffffffffffff\0" \
-/* Assume we boot with root on the first partition of a USB stick */
-#define CONFIG_BOOTARGS "console=ttyAMA0,115200n8 " \
- "root=/dev/sda1 rw " \
- "rootwait "\
- "earlyprintk=pl011,0x7ff80000 debug "\
- "user_debug=31 "\
- "androidboot.hardware=juno "\
- "loglevel=9"
-
/* Copy the kernel and FDT to DRAM memory and boot */
#define CONFIG_BOOTCOMMAND "afs load ${kernel_name} ${kernel_addr} ; " \
- "afs load ${fdt_name} ${fdt_addr} ; " \
+ "if test $? -eq 1; then "\
+ " echo Loading ${kernel_alt_name} instead of "\
+ "${kernel_name}; "\
+ " afs load ${kernel_alt_name} ${kernel_addr};"\
+ "fi ; "\
+ "afs load ${fdtfile} ${fdt_addr} ; " \
+ "if test $? -eq 1; then "\
+ " echo Loading ${fdt_alt_name} instead of "\
+ "${fdtfile}; "\
+ " afs load ${fdt_alt_name} ${fdt_addr}; "\
+ "fi ; "\
"fdt addr ${fdt_addr}; fdt resize; " \
"if afs load ${initrd_name} ${initrd_addr} ; "\
"then "\
"fi ; " \
"booti ${kernel_addr} ${initrd_param} ${fdt_addr}"
-#define CONFIG_BOOTDELAY 1
#elif CONFIG_TARGET_VEXPRESS64_BASE_FVP
#define CONFIG_EXTRA_ENV_SETTINGS \
"kernel_name=Image\0" \
- "kernel_addr=0x80000000\0" \
+ "kernel_addr=0x80080000\0" \
"initrd_name=ramdisk.img\0" \
"initrd_addr=0x88000000\0" \
- "fdt_name=devtree.dtb\0" \
+ "fdtfile=devtree.dtb\0" \
"fdt_addr=0x83000000\0" \
"fdt_high=0xffffffffffffffff\0" \
"initrd_high=0xffffffffffffffff\0"
-#define CONFIG_BOOTARGS "console=ttyAMA0 earlyprintk=pl011,"\
- "0x1c090000 debug user_debug=31 "\
- "loglevel=9"
-
#define CONFIG_BOOTCOMMAND "smhload ${kernel_name} ${kernel_addr}; " \
- "smhload ${fdt_name} ${fdt_addr}; " \
+ "smhload ${fdtfile} ${fdt_addr}; " \
"smhload ${initrd_name} ${initrd_addr} "\
"initrd_end; " \
"fdt addr ${fdt_addr}; fdt resize; " \
"fdt chosen ${initrd_addr} ${initrd_end}; " \
"booti $kernel_addr - $fdt_addr"
-#define CONFIG_BOOTDELAY 1
#elif CONFIG_TARGET_VEXPRESS64_BASE_FVP_DRAM
#define CONFIG_EXTRA_ENV_SETTINGS \
"fdt_high=0xffffffffffffffff\0" \
"initrd_high=0xffffffffffffffff\0"
-#define CONFIG_BOOTARGS "console=ttyAMA0 earlyprintk=pl011,"\
- "0x1c090000 debug user_debug=31 "\
- "androidboot.hardware=fvpbase "\
- "root=/dev/vda2 rw "\
- "rootwait "\
- "loglevel=9"
-
#define CONFIG_BOOTCOMMAND "booti $kernel_addr $initrd_addr $fdt_addr"
-#define CONFIG_BOOTDELAY 1
-#else
-#error "Unknown board variant"
#endif
-/* Do not preserve environment */
-#define CONFIG_ENV_IS_NOWHERE 1
-#define CONFIG_ENV_SIZE 0x1000
-
/* Monitor Command Prompt */
#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
- sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_CMDLINE_EDITING
#define CONFIG_SYS_MAXARGS 64 /* max command args */
-/* Flash memory is available on the Juno board only */
-#ifndef CONFIG_TARGET_VEXPRESS64_JUNO
-#define CONFIG_SYS_NO_FLASH
+#ifdef CONFIG_TARGET_VEXPRESS64_JUNO
+#define CONFIG_SYS_FLASH_BASE 0x08000000
+/* 255 x 256KiB sectors + 4 x 64KiB sectors at the end = 259 */
+#define CONFIG_SYS_MAX_FLASH_SECT 259
+/* Store environment at top of flash in the same location as blank.img */
+/* in the Juno firmware. */
+#define CONFIG_ENV_ADDR 0x0BFC0000
+#define CONFIG_ENV_SECT_SIZE 0x00010000
#else
-#define CONFIG_CMD_ARMFLASH
+#define CONFIG_SYS_FLASH_BASE 0x0C000000
+/* 256 x 256KiB sectors */
+#define CONFIG_SYS_MAX_FLASH_SECT 256
+/* Store environment at top of flash */
+#define CONFIG_ENV_ADDR 0x0FFC0000
+#define CONFIG_ENV_SECT_SIZE 0x00040000
+#endif
+
#define CONFIG_SYS_FLASH_CFI 1
#define CONFIG_FLASH_CFI_DRIVER 1
#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_32BIT
-#define CONFIG_SYS_FLASH_BASE 0x08000000
-#define CONFIG_SYS_FLASH_SIZE 0x04000000 /* 64 MiB */
-#define CONFIG_SYS_MAX_FLASH_BANKS 2
+#define CONFIG_SYS_MAX_FLASH_BANKS 1
-/* Timeout values in ticks */
-#define CONFIG_SYS_FLASH_ERASE_TOUT (2 * CONFIG_SYS_HZ) /* Erase Timeout */
-#define CONFIG_SYS_FLASH_WRITE_TOUT (2 * CONFIG_SYS_HZ) /* Write Timeout */
-
-/* 255 0x40000 sectors + first or last sector may have 4 erase regions = 259 */
-#define CONFIG_SYS_MAX_FLASH_SECT 259 /* Max sectors */
#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE /* use buffered writes */
#define CONFIG_SYS_FLASH_PROTECTION /* The devices have real protection */
#define CONFIG_SYS_FLASH_EMPTY_INFO /* flinfo indicates empty blocks */
-
-#endif
+#define FLASH_MAX_SECTOR_SIZE 0x00040000
+#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
#endif /* __VEXPRESS_AEMV8A_H */
projects / people / ms / u-boot.git / blobdiff