drivers, block: remove sil680 driver

[people/ms/u-boot.git] / include / configs / walnut.h

diff --git a/include/configs/walnut.h b/include/configs/walnut.h
index e24295cf14a37684a95ab4d4bfb0bd2108cb1de5..d2d1ce95bcbd8c985d66460c0ff87cef20620917 100644 (file)
--- a/include/configs/walnut.h
+++ b/include/configs/walnut.h
@@ -2,7 +2,7 @@
  * (C) Copyright 2000-2005
  * Stefan Roese, DENX Software Engineering, sr@denx.de.
  *
- * SPDX-License-Identifier:    GPL-2.0+ 
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 /*
@@ -18,7 +18,6 @@
  */
 
 #define CONFIG_405GP           1       /* This is a PPC405 CPU         */
-#define CONFIG_4xx             1       /* ...member of PPC4xx family   */
 #define CONFIG_WALNUT          1       /* ...on a WALNUT board         */
                                        /* ...or on a SYCAMORE board    */
 
@@ -30,8 +29,6 @@
 #define CONFIG_HOSTNAME                walnut
 #include "amcc-common.h"
 
-#define CONFIG_BOARD_EARLY_INIT_F 1    /* Call board_early_init_f      */
-
 #define CONFIG_SYS_CLK_FREQ    33333333 /* external frequency to pll   */
 
 /*
@@ -54,10 +51,8 @@
 /*
  * Commands additional to the ones defined in amcc-common.h
  */
-#define CONFIG_CMD_DATE
 #define CONFIG_CMD_PCI
 #define CONFIG_CMD_SDRAM
-#define CONFIG_CMD_SNTP
 
 #define CONFIG_SPD_EEPROM      1       /* use SPD EEPROM for setup    */
 
@@ -79,9 +74,8 @@
  * I2C stuff
  *-----------------------------------------------------------------------
  */
-#define CONFIG_SYS_I2C_SPEED           400000  /* I2C speed and slave address  */
+#define CONFIG_SYS_I2C_PPC4XX_SPEED_0          400000
 
-#define CONFIG_SYS_I2C_MULTI_EEPROMS
 #define CONFIG_SYS_I2C_EEPROM_ADDR     (0xa8>>1)
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
@@ -95,10 +89,8 @@
 #define PCI_HOST_FORCE 1               /* configure as pci host        */
 #define PCI_HOST_AUTO  2               /* detected via arbiter enable  */
 
-#define CONFIG_PCI                     /* include pci support          */
 #define CONFIG_PCI_INDIRECT_BRIDGE     /* indirect PCI bridge support */
 #define CONFIG_PCI_HOST PCI_HOST_FORCE /* select pci host function     */
-#define CONFIG_PCI_PNP                 /* do pci plug-and-play         */
                                        /* resource configuration       */
 #define CONFIG_PCI_SCAN_SHOW           /* show pci devices on startup  */