cmd: add Kconfig option for 'date' command

[people/ms/u-boot.git] / include / configs / woodburn_common.h

diff --git a/include/configs/woodburn_common.h b/include/configs/woodburn_common.h
index d0895cfdac7a910a9b28a7eeb259733885ddee07..46a67061716da88922cb0903579a3bfc626ed48d 100644 (file)
--- a/include/configs/woodburn_common.h
+++ b/include/configs/woodburn_common.h
@@ -16,17 +16,9 @@
  /* High Level Configuration Options */
 #define CONFIG_MX35
 #define CONFIG_MX35_HCLK_FREQ  24000000
+#define CONFIG_SYS_FSL_CLK
 
 #define CONFIG_SYS_DCACHE_OFF
-#define CONFIG_SYS_CACHELINE_SIZE      32
-
-#define CONFIG_DISPLAY_CPUINFO
-#define CONFIG_SYS_GENERIC_BOARD
-
-/* Only in case the value is not present in mach-types.h */
-#ifndef MACH_TYPE_FLEA3
-#define MACH_TYPE_FLEA3                3668
-#endif
 
 #define CONFIG_MACH_TYPE               MACH_TYPE_FLEA3
 
@@ -47,6 +39,8 @@
  */
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_I2C_MXC_I2C1                /* enable I2C bus 1 */
+#define CONFIG_SYS_I2C_MXC_I2C2                /* enable I2C bus 2 */
 #define CONFIG_SYS_I2C_MXC_I2C3                /* enable I2C bus 3 */
 #define CONFIG_SYS_SPD_BUS_NUM         0
 #define CONFIG_MXC_SPI
@@ -60,10 +54,7 @@
 #define CONFIG_SYS_FSL_PMIC_I2C_ADDR   0x8
 #define CONFIG_RTC_MC13XXX
 
-
 /* mmc driver */
-#define CONFIG_MMC
-#define CONFIG_GENERIC_MMC
 #define CONFIG_FSL_ESDHC
 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
 #define CONFIG_SYS_FSL_ESDHC_NUM       1
@@ -77,45 +68,23 @@
 /* allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
 #define CONFIG_CONS_INDEX      1
-#define CONFIG_BAUDRATE                115200
 
 /*
  * Command definition
  */
-
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_DHCP
 #define CONFIG_BOOTP_SUBNETMASK
 #define CONFIG_BOOTP_GATEWAY
 #define CONFIG_BOOTP_DNS
 
 #define CONFIG_CMD_NAND
-#define CONFIG_CMD_CACHE
-
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_SPI
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_NET
 
-#define CONFIG_CMD_MMC
-#define CONFIG_DOS_PARTITION
-#define CONFIG_EFI_PARTITION
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_FAT
-
-#define CONFIG_CMD_GPIO
 #define CONFIG_MXC_GPIO
 
 #define CONFIG_NET_RETRY_COUNT 100
 
-#define CONFIG_BOOTDELAY       3
 
 #define CONFIG_LOADADDR                0x80800000      /* loadaddr env var */
 
-
 /*
  * Ethernet on SOC (FEC)
  */
@@ -134,9 +103,7 @@
  * Miscellaneous configurable options
  */
 #define CONFIG_SYS_LONGHELP    /* undef to save memory */
-#define CONFIG_SYS_PROMPT      "woodburn U-Boot > "
 #define CONFIG_CMDLINE_EDITING
-#define CONFIG_SYS_HUSH_PARSER /* Use the HUSH parser */
 
 #define CONFIG_AUTO_COMPLETE
 #define CONFIG_SYS_CBSIZE      256     /* Console I/O Buffer Size */
@@ -150,13 +117,6 @@
 
 #define CONFIG_SYS_LOAD_ADDR           CONFIG_LOADADDR
 
-/*
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE       (128 * 1024)    /* regular stack */
-
 /*
  * Physical Memory Map
  */