bootcount: Migrate CONFIG_SYS_BOOTCOUNT_ADDR

[people/ms/u-boot.git] / include / configs / work_92105.h

diff --git a/include/configs/work_92105.h b/include/configs/work_92105.h
index a35876f410218da1a3241cb27cdf800f14e36664..cabd8156fa14ad65be90f2cedec9edbc4a720631 100644 (file)
--- a/include/configs/work_92105.h
+++ b/include/configs/work_92105.h
@@ -18,15 +18,13 @@
  * Define work_92105 machine type by hand -- done only for compatibility
  * with original board code
  */
-#define MACH_TYPE_WORK_92105           736
-#define CONFIG_MACH_TYPE               MACH_TYPE_WORK_92105
+#define CONFIG_MACH_TYPE               736
 
 #define CONFIG_SYS_ICACHE_OFF
 #define CONFIG_SYS_DCACHE_OFF
 #if !defined(CONFIG_SPL_BUILD)
 #define CONFIG_SKIP_LOWLEVEL_INIT
 #endif
-#define CONFIG_BOARD_EARLY_INIT_F
 #define CONFIG_BOARD_EARLY_INIT_R
 
 /* generate LPC32XX-specific SPL image */
@@ -39,7 +37,6 @@
 #define CONFIG_SYS_MALLOC_LEN          SZ_1M
 #define CONFIG_SYS_SDRAM_BASE          EMC_DYCS0_BASE
 #define CONFIG_SYS_SDRAM_SIZE          SZ_128M
-#define CONFIG_SYS_TEXT_BASE           0x80100000
 #define CONFIG_SYS_MEMTEST_START       (CONFIG_SYS_SDRAM_BASE + SZ_32K)
 #define CONFIG_SYS_MEMTEST_END         (CONFIG_SYS_TEXT_BASE - SZ_1M)
 
@@ -52,7 +49,6 @@
  * Serial Driver
  */
 #define CONFIG_SYS_LPC32XX_UART                5   /* UART5 - NS16550 */
-#define CONFIG_BAUDRATE                        115200
 
 /*
  * Ethernet Driver
@@ -60,12 +56,8 @@
 
 #define CONFIG_PHY_SMSC
 #define CONFIG_LPC32XX_ETH
-#define CONFIG_PHYLIB
 #define CONFIG_PHY_ADDR 0
 #define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_DHCP
 /* FIXME: remove "Waiting for PHY auto negotiation to complete..." message */
 
 /*
@@ -74,14 +66,12 @@
 
 #define CONFIG_SYS_I2C_LPC32XX
 #define CONFIG_SYS_I2C
-#define CONFIG_CMD_I2C
 #define CONFIG_SYS_I2C_SPEED 350000
 
 /*
  * I2C EEPROM
  */
 
-#define CONFIG_CMD_EEPROM
 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x56
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
 
@@ -89,40 +79,14 @@
  * I2C RTC
  */
 
-#define CONFIG_CMD_DATE
 #define CONFIG_RTC_DS1374
 
-/*
- * I2C Temperature Sensor (DTT)
- */
-
-#define CONFIG_CMD_DTT
-#define CONFIG_DTT_SENSORS { 0, 1 }
-#define CONFIG_DTT_DS620
-
 /*
  * U-Boot General Configurations
  */
-#define CONFIG_SYS_LONGHELP
 #define CONFIG_SYS_CBSIZE              1024
-#define CONFIG_SYS_PBSIZE              \
-       (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_MAXARGS             16
 #define CONFIG_SYS_BARGSIZE            CONFIG_SYS_CBSIZE
 
-
-#define CONFIG_AUTO_COMPLETE
-#define CONFIG_CMDLINE_EDITING
-#define CONFIG_VERSION_VARIABLE
-#define CONFIG_DISPLAY_CPUINFO
-#define CONFIG_DOS_PARTITION
-
-/*
- * No NOR
- */
-
-#define CONFIG_SYS_NO_FLASH
-
 /*
  * NAND chip timings for FIXME: which one?
  */
@@ -146,8 +110,6 @@
 #define CONFIG_SYS_NAND_BASE MLC_NAND_BASE
 #define CONFIG_NAND_LPC32XX_MLC
 
-#define CONFIG_CMD_NAND
-
 /*
  * GPIO
  */
@@ -158,16 +120,11 @@
  * SSP/SPI/DISPLAY
  */
 
-#define CONFIG_CMD_SPI
-#define CONFIG_LPC32XX_SSP
 #define CONFIG_LPC32XX_SSP_TIMEOUT 100000
-#define CONFIG_CMD_MAX6957
-#define CONFIG_CMD_HD44760
 /*
  * Environment
  */
 
-#define CONFIG_ENV_IS_IN_NAND          1
 #define CONFIG_ENV_SIZE                        0x00020000
 #define CONFIG_ENV_OFFSET              0x00100000
 #define CONFIG_ENV_OFFSET_REDUND       0x00120000
@@ -180,11 +137,7 @@
 #define CONFIG_SETUP_MEMORY_TAGS
 #define CONFIG_INITRD_TAG
 
-#define CONFIG_ZERO_BOOTDELAY_CHECK
-#define CONFIG_BOOTDELAY               3
-
 #define CONFIG_BOOTFILE                        "uImage"
-#define CONFIG_BOOTARGS                        "console=ttyS2,115200n8"
 #define CONFIG_LOADADDR                        0x80008000
 
 /*
@@ -195,15 +148,9 @@
 #define CONFIG_SPL_TEXT_BASE 0x00000000
 /* SPL will use SRAM as stack */
 #define CONFIG_SPL_STACK     0x0000FFF8
-#define CONFIG_SPL_BOARD_INIT
 /* Use the framework and generic lib */
-#define CONFIG_SPL_FRAMEWORK
-#define CONFIG_SPL_LIBGENERIC_SUPPORT
-#define CONFIG_SPL_LIBCOMMON_SUPPORT
 /* SPL will use serial */
-#define CONFIG_SPL_SERIAL_SUPPORT
 /* SPL will load U-Boot from NAND offset 0x40000 */
-#define CONFIG_SPL_NAND_SUPPORT
 #define CONFIG_SPL_NAND_DRIVERS
 #define CONFIG_SPL_NAND_BASE
 #define CONFIG_SPL_NAND_BOOT