Convert CONFIG_CMD_JFFS2 to Kconfig

[people/ms/u-boot.git] / include / configs / xilinx-ppc.h

diff --git a/include/configs/xilinx-ppc.h b/include/configs/xilinx-ppc.h
index 2422c0b0c34b45ebf780d5b4eec2b73b1cafe9d7..68ae44bfa16c26c6aaf1cada3e0f97d8a97bd371 100644 (file)
--- a/include/configs/xilinx-ppc.h
+++ b/include/configs/xilinx-ppc.h
@@ -1,26 +1,17 @@
 /*
  * (C) Copyright 2008
- *  Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es
+ *  Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@gmail.com
  *  This work has been supported by: QTechnology  http://qtec.com/
  *
  *  (C) Copyright 2008
  *  Georg Schardt <schardt@team-ctech.de>
  *
- *  This program is free software: you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation, either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *  You should have received a copy of the GNU General Public License
- *  along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ * SPDX-License-Identifier:    GPL-2.0+
 */
 
 #ifndef __CONFIG_XLX_H
 #define __CONFIG_XLX_H
+
 /*
 #define DEBUG
 #define ET_DEBUG
@@ -33,26 +24,11 @@
 #define CONFIG_SYS_MALLOC_LEN          (CONFIG_ENV_SIZE + 128 * 1024)
 
 /*Cmd*/
-#include <config_cmd_default.h>
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_CACHE
-#define CONFIG_CMD_DIAG
-#define CONFIG_CMD_ELF
 #define CONFIG_CMD_IRQ
 #define CONFIG_CMD_REGINFO
-#undef CONFIG_CMD_JFFS2
 #undef CONFIG_CMD_MTDPARTS
-#undef CONFIG_CMD_SPI
-#undef CONFIG_CMD_I2C
-#undef CONFIG_CMD_DTT
-#undef CONFIG_CMD_NET
-#undef CONFIG_CMD_PING
-#undef CONFIG_CMD_DHCP
-#undef CONFIG_CMD_EEPROM
-#undef CONFIG_CMD_IMLS
 
 /*Misc*/
-#define CONFIG_BOOTDELAY               5/* autoboot after 5 seconds     */
 #define CONFIG_SYS_LONGHELP            /* undef to save memory         */
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_SYS_CBSIZE              1024/* Console I/O Buffer Size      */
@@ -73,17 +49,10 @@
                                        /* default load address       */
 #define CONFIG_SYS_EXTBDINFO           1
                                        /* Extended board_into (bd_t) */
-#define CONFIG_SYS_HZ                  1000
                                        /* decrementer freq: 1 ms ticks */
 #define CONFIG_CMDLINE_EDITING         /* add command line history     */
 #define CONFIG_AUTO_COMPLETE           /* add autocompletion support   */
-#define CONFIG_LOOPW                   /* enable loopw command         */
 #define CONFIG_MX_CYCLIC               /* enable mdc/mwc commands      */
-#define CONFIG_ZERO_BOOTDELAY_CHECK    /* check for keypress on bootdelay==0 */
-#define CONFIG_VERSION_VARIABLE                /* include version env variable */
-#define CONFIG_SYS_CONSOLE_INFO_QUIET  /* don't print console @ startup */
-#define CONFIG_SYS_HUSH_PARSER         /* Use the HUSH parser          */
-#define        CONFIG_SYS_PROMPT_HUSH_PS2      "> "
 #define CONFIG_LOADS_ECHO              /* echo on for serial download  */
 #define CONFIG_SYS_LOADS_BAUD_CHANGE   /* allow baudrate change        */
 #define CONFIG_SYS_BOOTMAPSZ           (8 << 20)
@@ -106,32 +75,15 @@
 #define        CONFIG_SYS_FLASH_EMPTY_INFO     1
 #define        CONFIG_SYS_MAX_FLASH_BANKS      1
 #define        CONFIG_SYS_FLASH_PROTECTION
-#define CONFIG_CMD_JFFS2
 #define CONFIG_CMD_MTDPARTS
 #define CONFIG_MTD_DEVICE              /* needed for mtdparts commands */
 #define CONFIG_FLASH_CFI_MTD
 #else
 #define CONFIG_ENV_IS_NOWHERE
-#define CONFIG_SYS_NO_FLASH
 #endif
 
-/* serial communication */
-#ifdef XPAR_UARTLITE_0_BASEADDR
-#define CONFIG_XILINX_UARTLITE
-#define CONFIG_SERIAL_BASE             XPAR_UARTLITE_0_BASEADDR
-#define CONFIG_BAUDRATE                        XPAR_UARTLITE_0_BAUDRATE
-#define CONFIG_SYS_BAUDRATE_TABLE      { CONFIG_BAUDRATE }
-#else
-#ifdef XPAR_UARTNS550_0_BASEADDR
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE    4
-#define CONFIG_CONS_INDEX              1
-#define CONFIG_SYS_NS16550_COM1                XPAR_UARTNS550_0_BASEADDR
-#define CONFIG_SYS_NS16550_CLK         XPAR_UARTNS550_0_CLOCK_FREQ_HZ
-#define CONFIG_BAUDRATE                        115200
-#define CONFIG_SYS_BAUDRATE_TABLE      { 9600, 115200 }
-#endif
-#endif
+/* The following table includes the supported baudrates */
+# define CONFIG_SYS_BAUDRATE_TABLE \
+       {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
 
 #endif                                         /* __CONFIG_H */