Convert CONFIG_CMD_JFFS2 to Kconfig

[people/ms/u-boot.git] / include / configs / xilinx-ppc.h

diff --git a/include/configs/xilinx-ppc.h b/include/configs/xilinx-ppc.h
index 6bd6be86e1a91cff97003070e5d0af76409783cd..68ae44bfa16c26c6aaf1cada3e0f97d8a97bd371 100644 (file)
--- a/include/configs/xilinx-ppc.h
+++ b/include/configs/xilinx-ppc.h
@@ -1,6 +1,6 @@
 /*
  * (C) Copyright 2008
- *  Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es
+ *  Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@gmail.com
  *  This work has been supported by: QTechnology  http://qtec.com/
  *
  *  (C) Copyright 2008
@@ -12,8 +12,6 @@
 #ifndef __CONFIG_XLX_H
 #define __CONFIG_XLX_H
 
-#define CONFIG_SYS_GENERIC_BOARD
-
 /*
 #define DEBUG
 #define ET_DEBUG
@@ -26,22 +24,11 @@
 #define CONFIG_SYS_MALLOC_LEN          (CONFIG_ENV_SIZE + 128 * 1024)
 
 /*Cmd*/
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_CACHE
-#define CONFIG_CMD_DIAG
 #define CONFIG_CMD_IRQ
 #define CONFIG_CMD_REGINFO
-#undef CONFIG_CMD_JFFS2
 #undef CONFIG_CMD_MTDPARTS
-#undef CONFIG_CMD_SPI
-#undef CONFIG_CMD_I2C
-#undef CONFIG_CMD_DTT
-#undef CONFIG_CMD_PING
-#undef CONFIG_CMD_DHCP
-#undef CONFIG_CMD_EEPROM
 
 /*Misc*/
-#define CONFIG_BOOTDELAY               5/* autoboot after 5 seconds     */
 #define CONFIG_SYS_LONGHELP            /* undef to save memory         */
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_SYS_CBSIZE              1024/* Console I/O Buffer Size      */
@@ -65,12 +52,7 @@
                                        /* decrementer freq: 1 ms ticks */
 #define CONFIG_CMDLINE_EDITING         /* add command line history     */
 #define CONFIG_AUTO_COMPLETE           /* add autocompletion support   */
-#define CONFIG_LOOPW                   /* enable loopw command         */
 #define CONFIG_MX_CYCLIC               /* enable mdc/mwc commands      */
-#define CONFIG_ZERO_BOOTDELAY_CHECK    /* check for keypress on bootdelay==0 */
-#define CONFIG_VERSION_VARIABLE                /* include version env variable */
-#define CONFIG_SYS_CONSOLE_INFO_QUIET  /* don't print console @ startup */
-#define CONFIG_SYS_HUSH_PARSER         /* Use the HUSH parser          */
 #define CONFIG_LOADS_ECHO              /* echo on for serial download  */
 #define CONFIG_SYS_LOADS_BAUD_CHANGE   /* allow baudrate change        */
 #define CONFIG_SYS_BOOTMAPSZ           (8 << 20)
@@ -93,32 +75,15 @@
 #define        CONFIG_SYS_FLASH_EMPTY_INFO     1
 #define        CONFIG_SYS_MAX_FLASH_BANKS      1
 #define        CONFIG_SYS_FLASH_PROTECTION
-#define CONFIG_CMD_JFFS2
 #define CONFIG_CMD_MTDPARTS
 #define CONFIG_MTD_DEVICE              /* needed for mtdparts commands */
 #define CONFIG_FLASH_CFI_MTD
 #else
 #define CONFIG_ENV_IS_NOWHERE
-#define CONFIG_SYS_NO_FLASH
 #endif
 
-/* serial communication */
-#ifdef XPAR_UARTLITE_0_BASEADDR
-#define CONFIG_XILINX_UARTLITE
-#define XILINX_UARTLITE_BASEADDR       XPAR_UARTLITE_0_BASEADDR
-#define CONFIG_BAUDRATE                        XPAR_UARTLITE_0_BAUDRATE
-#define CONFIG_SYS_BAUDRATE_TABLE      { CONFIG_BAUDRATE }
-#else
-#ifdef XPAR_UARTNS550_0_BASEADDR
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE    4
-#define CONFIG_CONS_INDEX              1
-#define CONFIG_SYS_NS16550_COM1                XPAR_UARTNS550_0_BASEADDR
-#define CONFIG_SYS_NS16550_CLK         XPAR_UARTNS550_0_CLOCK_FREQ_HZ
-#define CONFIG_BAUDRATE                        115200
-#define CONFIG_SYS_BAUDRATE_TABLE      { 9600, 115200 }
-#endif
-#endif
+/* The following table includes the supported baudrates */
+# define CONFIG_SYS_BAUDRATE_TABLE \
+       {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
 
 #endif                                         /* __CONFIG_H */