Convert CONFIG_CMD_EEPROM et al to Kconfig

[people/ms/u-boot.git] / include / configs / xilinx_zynqmp.h

diff --git a/include/configs/xilinx_zynqmp.h b/include/configs/xilinx_zynqmp.h
index bb749c5e8eaa04838dc6f11bcf55ce03c73dd714..0b3154bc61849e1d65f0e6fbdb5ba5b60d1eaa4d 100644 (file)
--- a/include/configs/xilinx_zynqmp.h
+++ b/include/configs/xilinx_zynqmp.h
@@ -15,8 +15,6 @@
 
 /* #define CONFIG_ARMV8_SWITCH_TO_EL1 */
 
-#define CONFIG_SYS_NO_FLASH
-
 /* Generic Interrupt Controller Definitions */
 #define CONFIG_GICV2
 #define GICD_BASE      0xF9010000
@@ -50,17 +48,11 @@
 #define CONFIG_ZYNQ_SERIAL
 
 #define CONFIG_CONS_INDEX              0
-#define CONFIG_BAUDRATE                        115200
 #define CONFIG_SYS_BAUDRATE_TABLE \
        { 4800, 9600, 19200, 38400, 57600, 115200 }
 
 /* Command line configuration */
 #define CONFIG_CMD_ENV
-#define CONFIG_DOS_PARTITION
-#define CONFIG_EFI_PARTITION
-#ifndef CONFIG_SPL_BUILD
-# define CONFIG_ISO_PARTITION
-#endif
 #define CONFIG_MP
 
 /* BOOTP options */
@@ -80,8 +72,7 @@
 #endif
 #define CONFIG_AUTO_COMPLETE
 
-#if defined(CONFIG_ZYNQ_SDHCI)
-# define CONFIG_GENERIC_MMC
+#if defined(CONFIG_MMC_SDHCI_ZYNQ)
 # define CONFIG_SUPPORT_EMMC_BOOT
 # ifndef CONFIG_ZYNQ_SDHCI_MAX_FREQ
 #  define CONFIG_ZYNQ_SDHCI_MAX_FREQ   200000000
@@ -92,7 +83,7 @@
 # define FAT_ENV_INTERFACE             "mmc"
 #endif
 
-#if defined(CONFIG_ZYNQ_SDHCI) || defined(CONFIG_ZYNQMP_USB)
+#if defined(CONFIG_MMC_SDHCI_ZYNQ) || defined(CONFIG_ZYNQMP_USB)
 # define CONFIG_FAT_WRITE
 #endif
 
@@ -109,7 +100,6 @@
 
 #if defined(CONFIG_ZYNQMP_USB)
 #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS      2
-#define CONFIG_USB_XHCI_ZYNQMP
 
 #define CONFIG_SYS_DFU_DATA_BUF_SIZE   0x1800000
 #define DFU_DEFAULT_POLL_TIMEOUT       300
@@ -135,11 +125,9 @@
 # define CONFIG_FASTBOOT_BUF_ADDR 0x100000
 # define CONFIG_FASTBOOT_BUF_SIZE 0x6000000
 # define CONFIG_FASTBOOT_FLASH
-# ifdef CONFIG_ZYNQ_SDHCI
+# ifdef CONFIG_MMC_SDHCI_ZYNQ
 #  define CONFIG_FASTBOOT_FLASH_MMC_DEV 0
 # endif
-# define CONFIG_PARTITION_UUIDS
-# define CONFIG_CMD_GPT
 
 # define CONFIG_RANDOM_UUID
 # define PARTS_DEFAULT \
@@ -157,8 +145,6 @@
 # define PARTS_DEFAULT
 #endif
 
-#define CONFIG_BOARD_LATE_INIT
-
 /* Do not preserve environment */
 #if !defined(CONFIG_ENV_IS_IN_FAT)
 #define CONFIG_ENV_IS_NOWHERE          1
@@ -198,7 +184,6 @@
 
 /* EEPROM */
 #ifdef CONFIG_ZYNQMP_EEPROM
-# define CONFIG_CMD_EEPROM
 # define CONFIG_SYS_I2C_EEPROM_ADDR_LEN                2
 # define CONFIG_SYS_I2C_EEPROM_ADDR            0x54
 # define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS     4
@@ -218,8 +203,6 @@
 
 #define CONFIG_SYS_BOOTM_LEN   (60 * 1024 * 1024)
 
-#define CONFIG_CMD_UNZIP
-
 #define CONFIG_BOARD_EARLY_INIT_R
 #define CONFIG_CLOCKS
 
@@ -232,7 +215,7 @@
        "scriptaddr=0x02000000\0" \
        "ramdisk_addr_r=0x02100000\0" \
 
-#if defined(CONFIG_ZYNQ_SDHCI)
+#if defined(CONFIG_MMC_SDHCI_ZYNQ)
 # define BOOT_TARGET_DEVICES_MMC(func) func(MMC, mmc, 0) func(MMC, mmc, 1)
 #else
 # define BOOT_TARGET_DEVICES_MMC(func)
@@ -287,7 +270,6 @@
 #define CONFIG_SPL_BSS_MAX_SIZE                0x80000
 
 #define CONFIG_SPL_FRAMEWORK
-#define CONFIG_SPL_BOARD_INIT
 
 /* u-boot is like dtb */
 #define CONFIG_SPL_FS_LOAD_ARGS_NAME   "u-boot.bin"
@@ -300,7 +282,7 @@
 #define CONFIG_SPL_LOAD_FIT_ADDRESS    0x10000000
 
 /* MMC support */
-#ifdef CONFIG_ZYNQ_SDHCI
+#ifdef CONFIG_MMC_SDHCI_ZYNQ
 # define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION    1
 # define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0 /* unused */
 # define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS        0 /* unused */