Remove config_distro_defaults.h

[people/ms/u-boot.git] / include / configs / xilinx_zynqmp.h

diff --git a/include/configs/xilinx_zynqmp.h b/include/configs/xilinx_zynqmp.h
index 1b436205401124c00729bfa598c21f10614c25fe..52baa42a2f11aed8861053c63898ca04e557888f 100644 (file)
--- a/include/configs/xilinx_zynqmp.h
+++ b/include/configs/xilinx_zynqmp.h
@@ -29,9 +29,6 @@
 #define CONFIG_SYS_MEMTEST_START       0
 #define CONFIG_SYS_MEMTEST_END         1000
 
-/* Have release address at the end of 256MB for now */
-#define CPU_RELEASE_ADDR       0xFFFFFF0
-
 #define CONFIG_SYS_INIT_SP_ADDR                CONFIG_SYS_TEXT_BASE
 
 /* Generic Timer Definitions - setup in EL3. Setup by ATF for other cases */
@@ -45,7 +42,6 @@
 /* Serial setup */
 #define CONFIG_ARM_DCC
 #define CONFIG_CPU_ARMV8
-#define CONFIG_ZYNQ_SERIAL
 
 #define CONFIG_CONS_INDEX              0
 #define CONFIG_SYS_BAUDRATE_TABLE \
@@ -56,55 +52,32 @@
 
 /* BOOTP options */
 #define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
 #define CONFIG_BOOTP_MAY_FAIL
-#define CONFIG_BOOTP_DNS
-#define CONFIG_BOOTP_PXE
-#define CONFIG_BOOTP_SUBNETMASK
-
-/* Diff from config_distro_defaults.h */
-#define CONFIG_SUPPORT_RAW_INITRD
-#if !defined(CONFIG_SPL_BUILD)
-#define CONFIG_ENV_VARS_UBOOT_CONFIG
-#endif
-#define CONFIG_AUTO_COMPLETE
 
 #if defined(CONFIG_MMC_SDHCI_ZYNQ)
 # define CONFIG_SUPPORT_EMMC_BOOT
 # ifndef CONFIG_ZYNQ_SDHCI_MAX_FREQ
 #  define CONFIG_ZYNQ_SDHCI_MAX_FREQ   200000000
 # endif
-# define CONFIG_ENV_IS_IN_FAT
-# define FAT_ENV_DEVICE_AND_PART       "0:auto"
-# define FAT_ENV_FILE                  "uboot.env"
-# define FAT_ENV_INTERFACE             "mmc"
-#endif
-
-#if defined(CONFIG_MMC_SDHCI_ZYNQ) || defined(CONFIG_ZYNQMP_USB)
-# define CONFIG_FAT_WRITE
 #endif
 
 #ifdef CONFIG_NAND_ARASAN
-# define CONFIG_CMD_NAND_LOCK_UNLOCK
 # define CONFIG_SYS_MAX_NAND_DEVICE    1
-# define CONFIG_SYS_NAND_SELF_INIT
 # define CONFIG_SYS_NAND_ONFI_DETECTION
 # define CONFIG_MTD_DEVICE
 #endif
 
+#if defined(CONFIG_SPL_BUILD)
+#define CONFIG_ZYNQMP_PSU_INIT_ENABLED
+#endif
+
 /* Miscellaneous configurable options */
 #define CONFIG_SYS_LOAD_ADDR           0x8000000
 
 #if defined(CONFIG_ZYNQMP_USB)
-#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS      2
-
 #define CONFIG_SYS_DFU_DATA_BUF_SIZE   0x1800000
 #define DFU_DEFAULT_POLL_TIMEOUT       300
 #define CONFIG_USB_CABLE_CHECK
-#define CONFIG_CMD_THOR_DOWNLOAD
-#define CONFIG_USB_FUNCTION_THOR
 #define CONFIG_THOR_RESET_OFF
 #define DFU_ALT_INFO_RAM \
        "dfu_ram_info=" \
@@ -118,17 +91,6 @@
                DFU_ALT_INFO_RAM
 
 #ifndef CONFIG_SPL_BUILD
-# define CONFIG_USB_FUNCTION_FASTBOOT
-# define CONFIG_CMD_FASTBOOT
-# define CONFIG_ANDROID_BOOT_IMAGE
-# define CONFIG_FASTBOOT_BUF_ADDR 0x100000
-# define CONFIG_FASTBOOT_BUF_SIZE 0x6000000
-# define CONFIG_FASTBOOT_FLASH
-# ifdef CONFIG_MMC_SDHCI_ZYNQ
-#  define CONFIG_FASTBOOT_FLASH_MMC_DEV 0
-# endif
-
-# define CONFIG_RANDOM_UUID
 # define PARTS_DEFAULT \
        "partitions=uuid_disk=${uuid_gpt_disk};" \
        "name=""boot"",size=16M,uuid=${uuid_gpt_boot};" \
@@ -145,32 +107,19 @@
 #endif
 
 /* Do not preserve environment */
-#if !defined(CONFIG_ENV_IS_IN_FAT)
-#define CONFIG_ENV_IS_NOWHERE          1
-#endif
 #define CONFIG_ENV_SIZE                        0x8000
 
 /* Monitor Command Prompt */
 /* Console I/O Buffer Size */
 #define CONFIG_SYS_CBSIZE              2048
-#define CONFIG_SYS_PBSIZE              (CONFIG_SYS_CBSIZE + \
-                                       sizeof(CONFIG_SYS_PROMPT) + 16)
 #define CONFIG_SYS_BARGSIZE            CONFIG_SYS_CBSIZE
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_CMDLINE_EDITING
+#define CONFIG_PANIC_HANG
 #define CONFIG_SYS_MAXARGS             64
 
 /* Ethernet driver */
 #if defined(CONFIG_ZYNQ_GEM)
-# define CONFIG_NET_MULTI
 # define CONFIG_MII
 # define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
-# define CONFIG_PHY_MARVELL
-# define CONFIG_PHY_NATSEMI
-# define CONFIG_PHY_TI
-# define CONFIG_PHY_GIGE
-# define CONFIG_PHY_VITESSE
-# define CONFIG_PHY_REALTEK
 # define PHY_ANEG_TIMEOUT       20000
 #endif
 
@@ -191,13 +140,10 @@
 #endif
 
 #ifdef CONFIG_SATA_CEVA
-#define CONFIG_LIBATA
-#define CONFIG_SCSI_AHCI
 #define CONFIG_SYS_SCSI_MAX_SCSI_ID    2
 #define CONFIG_SYS_SCSI_MAX_LUN                1
 #define CONFIG_SYS_SCSI_MAX_DEVICE     (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
                                         CONFIG_SYS_SCSI_MAX_LUN)
-#define CONFIG_SCSI
 #endif
 
 #define CONFIG_SYS_BOOTM_LEN   (60 * 1024 * 1024)
@@ -268,7 +214,14 @@
 #define CONFIG_SPL_BSS_START_ADDR      0x0
 #define CONFIG_SPL_BSS_MAX_SIZE                0x80000
 
-#define CONFIG_SPL_FRAMEWORK
+#if defined(CONFIG_SPL_SPI_FLASH_SUPPORT)
+# define CONFIG_SPL_SPI_LOAD
+# define CONFIG_SYS_SPI_KERNEL_OFFS    0x80000
+# define CONFIG_SYS_SPI_ARGS_OFFS      0xa0000
+# define CONFIG_SYS_SPI_ARGS_SIZE      0xa0000
+
+# define CONFIG_SYS_SPI_U_BOOT_OFFS    0x170000
+#endif
 
 /* u-boot is like dtb */
 #define CONFIG_SPL_FS_LOAD_ARGS_NAME   "u-boot.bin"
@@ -294,13 +247,15 @@
 # define CONFIG_SPL_ENV_SUPPORT
 # define CONFIG_SPL_HASH_SUPPORT
 # define CONFIG_ENV_MAX_ENTRIES        10
+#endif
 
-# define CONFIG_SYS_SPL_MALLOC_START   0x20000000
-# define CONFIG_SYS_SPL_MALLOC_SIZE    0x10000000
+#define CONFIG_SYS_SPL_MALLOC_START    0x20000000
+#define CONFIG_SYS_SPL_MALLOC_SIZE     0x100000
 
 #ifdef CONFIG_SPL_SYS_MALLOC_SIMPLE
 # error "Disable CONFIG_SPL_SYS_MALLOC_SIMPLE. Full malloc needs to be used"
 #endif
-#endif
+
+#define CONFIG_BOARD_EARLY_INIT_F
 
 #endif /* __XILINX_ZYNQMP_H */