Move CONFIG_OF_LIBFDT to Kconfig

[people/ms/u-boot.git] / include / configs / xilinx_zynqmp.h

diff --git a/include/configs/xilinx_zynqmp.h b/include/configs/xilinx_zynqmp.h
index ed09b7f67e73dc662870a43f1b67b932b662a995..9d9ffd00c18c307eb10d427bcf2b563d27c1e64a 100644 (file)
--- a/include/configs/xilinx_zynqmp.h
+++ b/include/configs/xilinx_zynqmp.h
@@ -17,17 +17,14 @@
 
 #define CONFIG_SYS_NO_FLASH
 
-#define CONFIG_SYS_GENERIC_BOARD
 
 /* Generic Interrupt Controller Definitions */
 #define CONFIG_GICV2
 #define GICD_BASE      0xF9010000
 #define GICC_BASE      0xF9020000
 
-/* Physical Memory Map */
-#define CONFIG_NR_DRAM_BANKS           1
-#define CONFIG_SYS_SDRAM_BASE          0
-#define CONFIG_SYS_SDRAM_SIZE          0x40000000
+#define CONFIG_SYS_ALT_MEMTEST
+#define CONFIG_SYS_MEMTEST_SCRATCH     0xfffc0000
 
 #define CONFIG_SYS_MEMTEST_START       CONFIG_SYS_SDRAM_BASE
 #define CONFIG_SYS_MEMTEST_END         CONFIG_SYS_SDRAM_SIZE
@@ -38,28 +35,26 @@
 /* Cache Definitions */
 #define CONFIG_SYS_CACHELINE_SIZE      64
 
-#define CONFIG_IDENT_STRING            " Xilinx ZynqMP"
+#if !defined(CONFIG_IDENT_STRING)
+# define CONFIG_IDENT_STRING           " Xilinx ZynqMP"
+#endif
 
 #define CONFIG_SYS_INIT_SP_ADDR                (CONFIG_SYS_SDRAM_BASE + 0x7fff0)
 
 /* Flat Device Tree Definitions */
-#define CONFIG_OF_LIBFDT
 
 /* Generic Timer Definitions - setup in EL3. Setup by ATF for other cases */
-#define COUNTER_FREQUENCY              4000000
+#if !defined(COUNTER_FREQUENCY)
+# define COUNTER_FREQUENCY             100000000
+#endif
 
 /* Size of malloc() pool */
 #define CONFIG_SYS_MALLOC_LEN          (CONFIG_ENV_SIZE + 0x2000000)
 
 /* Serial setup */
-#if defined(CONFIG_ZYNQMP_DCC)
-# define CONFIG_ARM_DCC
-# define CONFIG_CPU_ARMV8
-#else
-# if defined(CONFIG_ZYNQ_SERIAL_UART0) || defined(CONFIG_ZYNQ_SERIAL_UART1)
-#  define CONFIG_ZYNQ_SERIAL
-# endif
-#endif
+#define CONFIG_ARM_DCC
+#define CONFIG_CPU_ARMV8
+#define CONFIG_ZYNQ_SERIAL
 
 #define CONFIG_CONS_INDEX              0
 #define CONFIG_BAUDRATE                        115200
@@ -87,27 +82,42 @@
 
 /* SPI */
 #ifdef CONFIG_ZYNQ_SPI
-# define CONFIG_SPI_FLASH_SST
 # define CONFIG_CMD_SF
 #endif
 
-#if defined(CONFIG_ZYNQ_SDHCI0) || defined(CONFIG_ZYNQ_SDHCI1)
+#if defined(CONFIG_ZYNQ_SDHCI)
 # define CONFIG_MMC
 # define CONFIG_GENERIC_MMC
 # define CONFIG_SDHCI
-# define CONFIG_ZYNQ_SDHCI
 # define CONFIG_CMD_MMC
-#endif
-
-#if defined(CONFIG_ZYNQ_SDHCI)
+# ifndef CONFIG_ZYNQ_SDHCI_MAX_FREQ
+#  define CONFIG_ZYNQ_SDHCI_MAX_FREQ   200000000
+# endif
 # define CONFIG_FAT_WRITE
 # define CONFIG_CMD_EXT4_WRITE
 #endif
 
+#ifdef CONFIG_NAND_ARASAN
+# define CONFIG_CMD_NAND
+# define CONFIG_CMD_NAND_LOCK_UNLOCK
+# define CONFIG_SYS_MAX_NAND_DEVICE    1
+# define CONFIG_SYS_NAND_SELF_INIT
+# define CONFIG_SYS_NAND_ONFI_DETECTION
+# define CONFIG_MTD_DEVICE
+#endif
+
 /* Miscellaneous configurable options */
 #define CONFIG_SYS_LOAD_ADDR           0x8000000
 
 #if defined(CONFIG_ZYNQMP_USB)
+#define CONFIG_USB_XHCI_DWC3
+#define CONFIG_USB_XHCI
+#define CONFIG_USB_MAX_CONTROLLER_COUNT         1
+#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS      2
+#define CONFIG_CMD_USB
+#define CONFIG_USB_STORAGE
+#define CONFIG_USB_XHCI_ZYNQMP
+
 #define CONFIG_USB_DWC3
 #define CONFIG_USB_DWC3_GADGET
 
@@ -130,9 +140,9 @@
 #define CONFIG_THOR_RESET_OFF
 #define DFU_ALT_INFO_RAM \
        "dfu_ram_info=" \
-       "set dfu_alt_info " \
-       "Image ram 0x200000 0x1800000\\\\;" \
-       "system.dtb ram 0x7000000 0x40000\0" \
+       "setenv dfu_alt_info " \
+       "Image ram $kernel_addr $kernel_size\\\\;" \
+       "system.dtb ram $fdt_addr $fdt_size\0" \
        "dfu_ram=run dfu_ram_info && dfu 0 ram 0\0" \
        "thor_ram=run dfu_ram_info && thordown 0 ram 0\0"
 
@@ -149,12 +159,14 @@
        "kernel_addr=0x80000\0" \
        "fdt_addr=0x7000000\0" \
        "fdt_high=0x10000000\0" \
-       "sdboot=mmcinfo && load mmc 0:0 $fdt_addr system.dtb && " \
-               "load mmc 0:0 $kernel_addr Image && booti $kernel_addr - $fdt_addr\0" \
+       "kernel_size=0x2000000\0" \
+       "fdt_size=0x80000\0" \
+       "sdbootdev=0\0"\
+       "sdboot=mmc dev $sdbootdev && mmcinfo && load mmc $sdbootdev:$partid $fdt_addr system.dtb && " \
+               "load mmc $sdbootdev:$partid $kernel_addr Image && " \
+               "booti $kernel_addr - $fdt_addr\0" \
        DFU_ALT_INFO
 
-#define CONFIG_BOOTARGS                "setenv bootargs console=ttyPS0,${baudrate} " \
-                               "earlycon=cdns,mmio,0xff000000,${baudrate}n8"
 #define CONFIG_PREBOOT         "run bootargs"
 #define CONFIG_BOOTCOMMAND     "run $modeboot"
 #define CONFIG_BOOTDELAY       5
@@ -177,14 +189,15 @@
 #define CONFIG_SYS_MAXARGS             64
 
 /* Ethernet driver */
-#if defined(CONFIG_ZYNQ_GEM0) || defined(CONFIG_ZYNQ_GEM1) || \
-       defined(CONFIG_ZYNQ_GEM2) || defined(CONFIG_ZYNQ_GEM3)
+#if defined(CONFIG_ZYNQ_GEM)
 # define CONFIG_NET_MULTI
-# define CONFIG_ZYNQ_GEM
 # define CONFIG_MII
 # define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
-# define CONFIG_PHYLIB
 # define CONFIG_PHY_MARVELL
+# define CONFIG_PHY_NATSEMI
+# define CONFIG_PHY_TI
+# define CONFIG_PHY_GIGE
+# define PHY_ANEG_TIMEOUT       20000
 #endif
 
 /* I2C */
@@ -216,9 +229,6 @@
 #define CONFIG_CMD_SCSI
 #endif
 
-#define CONFIG_FIT
-#define CONFIG_FIT_VERBOSE       /* enable fit_format_{error,warning}() */
-
 #define CONFIG_SYS_BOOTM_LEN   (60 * 1024 * 1024)
 
 #define CONFIG_CMD_BOOTI