ns16550: move CONFIG_SYS_NS16550 to Kconfig

[people/ms/u-boot.git] / include / configs / xpedite517x.h

diff --git a/include/configs/xpedite517x.h b/include/configs/xpedite517x.h
index f28f443fe926d4afa34d31c143ac96b8ad76b84a..96b357b6fd4f25380f17d60820c4775f652c7458 100644 (file)
--- a/include/configs/xpedite517x.h
+++ b/include/configs/xpedite517x.h
@@ -2,23 +2,7 @@
  * Copyright 2009 Extreme Engineering Solutions, Inc.
  * Copyright 2007-2008 Freescale Semiconductor, Inc.
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 /*
@@ -30,7 +14,6 @@
 /*
  * High Level Configuration Options
  */
-#define CONFIG_MPC86xx         1       /* MPC86xx */
 #define CONFIG_MPC8641         1       /* MPC8641 specific */
 #define CONFIG_XPEDITE5140     1       /* MPC8641HPCN board specific */
 #define CONFIG_SYS_BOARD_NAME  "XPedite5170"
@@ -40,6 +23,7 @@
 #define CONFIG_BAT_RW          1       /* Use common BAT rw code */
 #define CONFIG_HIGH_BATS       1       /* High BATs supported and enabled */
 #define CONFIG_ALTIVEC         1
+#define CONFIG_DISPLAY_BOARDINFO
 
 #define        CONFIG_SYS_TEXT_BASE    0xfff00000
 
@@ -56,7 +40,7 @@
 /*
  * DDR config
  */
-#define CONFIG_FSL_DDR2
+#define CONFIG_SYS_FSL_DDR2
 #define CONFIG_SPD_EEPROM              /* Use SPD EEPROM for DDR setup */
 #define CONFIG_DDR_SPD
 #define CONFIG_MEM_INIT_VALUE          0xdeadbeef
@@ -153,7 +137,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_SYS_NAND_ACTL_CLE       (1 << 15)       /* C_LA15 */
 #define CONFIG_SYS_NAND_ACTL_NCE       0               /* NCE not controlled by ADDR */
 #define CONFIG_SYS_NAND_ACTL_DELAY     25
-#define CONFIG_SYS_NAND_QUIET_TEST
 #define CONFIG_JFFS2_NAND
 
 /*
@@ -231,7 +214,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
  * Serial Port
  */
 #define CONFIG_CONS_INDEX              1
-#define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE    1
 #define CONFIG_SYS_NS16550_CLK         get_bus_freq(0)
@@ -258,13 +240,14 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 /*
  * I2C
  */
-#define CONFIG_FSL_I2C                         /* Use FSL common I2C driver */
-#define CONFIG_HARD_I2C                                /* I2C with hardware support */
-#define CONFIG_SYS_I2C_SPEED           100000  /* M41T00 only supports 100 KHz */
-#define CONFIG_SYS_I2C_SLAVE           0x7F
-#define CONFIG_SYS_I2C_OFFSET          0x3000
-#define CONFIG_SYS_I2C2_OFFSET         0x3100
-#define CONFIG_I2C_MULTI_BUS
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED       100000
+#define CONFIG_SYS_FSL_I2C_SLAVE       0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET      0x3000
+#define CONFIG_SYS_FSL_I2C2_SPEED      100000
+#define CONFIG_SYS_FSL_I2C2_SLAVE      0x7F
+#define CONFIG_SYS_FSL_I2C2_OFFSET     0x3100
 
 /* PEX8518 slave I2C interface */
 #define CONFIG_SYS_I2C_PEX8518_ADDR    0x70
@@ -540,8 +523,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 /*
  * Command configuration.
  */
-#include <config_cmd_default.h>
-
 #define CONFIG_CMD_ASKENV
 #define CONFIG_CMD_DATE
 #define CONFIG_CMD_DHCP
@@ -549,15 +530,11 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_CMD_DS4510_INFO
 #define CONFIG_CMD_DTT
 #define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_ELF
-#define CONFIG_CMD_SAVEENV
-#define CONFIG_CMD_FLASH
 #define CONFIG_CMD_I2C
 #define CONFIG_CMD_IRQ
 #define CONFIG_CMD_JFFS2
 #define CONFIG_CMD_MII
 #define CONFIG_CMD_NAND
-#define CONFIG_CMD_NET
 #define CONFIG_CMD_PCA953X
 #define CONFIG_CMD_PCA953X_INFO
 #define CONFIG_CMD_PCI
@@ -571,12 +548,10 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
  */
 #define CONFIG_SYS_LONGHELP                    /* undef to save memory */
 #define CONFIG_SYS_LOAD_ADDR   0x2000000       /* default load address */
-#define CONFIG_SYS_PROMPT      "=> "           /* Monitor Command Prompt */
 #define CONFIG_SYS_CBSIZE      256             /* Console I/O Buffer Size */
 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
 #define CONFIG_SYS_MAXARGS     16              /* max number of command args */
 #define CONFIG_SYS_BARGSIZE    CONFIG_SYS_CBSIZE       /* Boot Argument Buffer Size */
-#define CONFIG_SYS_HZ          1000            /* decrementer freq: 1ms ticks */
 #define CONFIG_CMDLINE_EDITING 1               /* Command-line editing */
 #define CONFIG_LOADADDR                0x1000000       /* default location for tftp and bootm */
 #define CONFIG_BOOTDELAY       3               /* -1 disables auto-boot */