Merge git://git.denx.de/u-boot-mmc

[people/ms/u-boot.git] / include / configs / xpedite520x.h

diff --git a/include/configs/xpedite520x.h b/include/configs/xpedite520x.h
index d1847ac2e8c4d4d554834cb2968a77f754222d19..dfacd2a012a00545c9d87d0123032f447a4952ab 100644 (file)
--- a/include/configs/xpedite520x.h
+++ b/include/configs/xpedite520x.h
@@ -14,38 +14,24 @@
 /*
  * High Level Configuration Options
  */
-#define CONFIG_BOOKE           1       /* BOOKE */
-#define CONFIG_E500            1       /* BOOKE e500 family */
-#define CONFIG_MPC8548         1
-#define CONFIG_XPEDITE5200     1
 #define CONFIG_SYS_BOARD_NAME  "XPedite5200"
 #define CONFIG_SYS_FORM_PMC_XMC        1
 #define CONFIG_BOARD_EARLY_INIT_R      /* Call board_pre_init */
-#define CONFIG_DISPLAY_BOARDINFO
 
-#ifndef CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_TEXT_BASE   0xfff80000
-#endif
-
-#define CONFIG_PCI             1       /* Enable PCI/PCIE */
-#define CONFIG_PCI_PNP         1       /* do pci plug-and-play */
 #define CONFIG_PCI_SCAN_SHOW   1       /* show pci devices on startup */
 #define CONFIG_PCI1            1       /* PCI controller 1 */
 #define CONFIG_FSL_PCI_INIT    1       /* Use common FSL init code */
 #define CONFIG_PCI_INDIRECT_BRIDGE 1   /* indirect PCI bridge support */
 #define CONFIG_SYS_PCI_64BIT   1       /* enable 64-bit PCI resources */
-#define CONFIG_FSL_LAW         1       /* Use common FSL init code */
 
 /*
  * DDR config
  */
-#define CONFIG_SYS_FSL_DDR2
 #undef CONFIG_FSL_DDR_INTERACTIVE
 #define CONFIG_SPD_EEPROM              /* Use SPD EEPROM for DDR setup */
 #define CONFIG_DDR_SPD
 #define CONFIG_MEM_INIT_VALUE          0xdeadbeef
 #define SPD_EEPROM_ADDRESS             0x54
-#define CONFIG_NUM_DDR_CONTROLLERS     1
 #define CONFIG_DIMM_SLOTS_PER_CTLR     1
 #define CONFIG_CHIP_SELECTS_PER_CTRL   2
 #define CONFIG_DDR_ECC
@@ -184,7 +170,6 @@
 #define CONFIG_SYS_NS16550_COM2        (CONFIG_SYS_CCSRBAR+0x4600)
 #define CONFIG_SYS_BAUDRATE_TABLE      \
        {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200}
-#define CONFIG_BAUDRATE                        115200
 #define CONFIG_LOADS_ECHO              1       /* echo on for serial download */
 #define CONFIG_SYS_LOADS_BAUD_CHANGE   1       /* allow baudrate change */
 
@@ -255,7 +240,6 @@
  * Networking options
  */
 #define CONFIG_TSEC_ENET               /* tsec ethernet support */
-#define CONFIG_PHY_GIGE                1       /* Include GbE speed/duplex detection */
 #define CONFIG_MII             1       /* MII PHY management */
 #define CONFIG_ETHPRIME                "eTSEC1"
 
@@ -291,36 +275,12 @@
  * BOOTP options
  */
 #define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-
-/*
- * Command configuration.
- */
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_JFFS2
-#define CONFIG_CMD_NAND
-#define CONFIG_CMD_PCA953X
-#define CONFIG_CMD_PCA953X_INFO
-#define CONFIG_CMD_PCI
-#define CONFIG_CMD_PCI_ENUM
-#define CONFIG_CMD_REGINFO
 
 /*
  * Miscellaneous configurable options
  */
-#define CONFIG_SYS_LONGHELP                    /* undef to save memory */
 #define CONFIG_SYS_LOAD_ADDR   0x2000000       /* default load address */
-#define CONFIG_SYS_CBSIZE      256             /* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS     16              /* max number of command args */
-#define CONFIG_SYS_BARGSIZE    CONFIG_SYS_CBSIZE       /* Boot Argument Buffer Size */
-#define CONFIG_CMDLINE_EDITING 1               /* add command line history     */
-#define CONFIG_AUTO_COMPLETE   1               /* add autocompletion support */
 #define CONFIG_LOADADDR                0x1000000       /* default location for tftp and bootm */
-#define CONFIG_BOOTDELAY       3               /* -1 disables auto-boot */
-#define CONFIG_PANIC_HANG                      /* do not reset board on panic */
 #define CONFIG_PREBOOT                         /* enable preboot variable */
 #define CONFIG_INTEGRITY                       /* support booting INTEGRITY OS */
 #define CONFIG_INTERRUPTS              /* enable pci, srio, ddr interrupts */
@@ -336,7 +296,6 @@
 /*
  * Environment Configuration
  */
-#define CONFIG_ENV_IS_IN_FLASH 1
 #define CONFIG_ENV_SECT_SIZE   0x20000         /* 128k (one sector) for env */
 #define CONFIG_ENV_SIZE                0x8000
 #define CONFIG_ENV_ADDR                (CONFIG_SYS_MONITOR_BASE - (256 * 1024))
@@ -484,7 +443,7 @@
        "osfile=/home/user/board.uImage\0"                              \
        "fdtfile=/home/user/board.dtb\0"                                \
        "ubootfile=/home/user/u-boot.bin\0"                             \
-       "fdtaddr=c00000\0"                                              \
+       "fdtaddr=0x1e00000\0"                                           \
        "osaddr=0x1000000\0"                                            \
        "loadaddr=0x1000000\0"                                          \
        "prog_uboot1="CONFIG_PROG_UBOOT1"\0"                            \