cmd: add Kconfig option for 'date' command

[people/ms/u-boot.git] / include / configs / xpedite520x.h

diff --git a/include/configs/xpedite520x.h b/include/configs/xpedite520x.h
index f7cfc9ea865fbab6873d9f15c48bcdfb9fc573dd..ffc0d009bafb9311aea6ad3d6c6d90fd5b3c744d 100644 (file)
--- a/include/configs/xpedite520x.h
+++ b/include/configs/xpedite520x.h
@@ -14,38 +14,29 @@
 /*
  * High Level Configuration Options
  */
-#define CONFIG_BOOKE           1       /* BOOKE */
-#define CONFIG_E500            1       /* BOOKE e500 family */
-#define CONFIG_MPC8548         1
 #define CONFIG_XPEDITE5200     1
 #define CONFIG_SYS_BOARD_NAME  "XPedite5200"
 #define CONFIG_SYS_FORM_PMC_XMC        1
 #define CONFIG_BOARD_EARLY_INIT_R      /* Call board_pre_init */
-#define CONFIG_DISPLAY_BOARDINFO
 
 #ifndef CONFIG_SYS_TEXT_BASE
 #define CONFIG_SYS_TEXT_BASE   0xfff80000
 #endif
 
-#define CONFIG_PCI             1       /* Enable PCI/PCIE */
-#define CONFIG_PCI_PNP         1       /* do pci plug-and-play */
 #define CONFIG_PCI_SCAN_SHOW   1       /* show pci devices on startup */
 #define CONFIG_PCI1            1       /* PCI controller 1 */
 #define CONFIG_FSL_PCI_INIT    1       /* Use common FSL init code */
 #define CONFIG_PCI_INDIRECT_BRIDGE 1   /* indirect PCI bridge support */
 #define CONFIG_SYS_PCI_64BIT   1       /* enable 64-bit PCI resources */
-#define CONFIG_FSL_LAW         1       /* Use common FSL init code */
 
 /*
  * DDR config
  */
-#define CONFIG_SYS_FSL_DDR2
 #undef CONFIG_FSL_DDR_INTERACTIVE
 #define CONFIG_SPD_EEPROM              /* Use SPD EEPROM for DDR setup */
 #define CONFIG_DDR_SPD
 #define CONFIG_MEM_INIT_VALUE          0xdeadbeef
 #define SPD_EEPROM_ADDRESS             0x54
-#define CONFIG_NUM_DDR_CONTROLLERS     1
 #define CONFIG_DIMM_SLOTS_PER_CTLR     1
 #define CONFIG_CHIP_SELECTS_PER_CTRL   2
 #define CONFIG_DDR_ECC
@@ -184,7 +175,6 @@
 #define CONFIG_SYS_NS16550_COM2        (CONFIG_SYS_CCSRBAR+0x4600)
 #define CONFIG_SYS_BAUDRATE_TABLE      \
        {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200}
-#define CONFIG_BAUDRATE                        115200
 #define CONFIG_LOADS_ECHO              1       /* echo on for serial download */
 #define CONFIG_SYS_LOADS_BAUD_CHANGE   1       /* allow baudrate change */
 
@@ -297,7 +287,6 @@
 /*
  * Command configuration.
  */
-#define CONFIG_CMD_DATE
 #define CONFIG_CMD_EEPROM
 #define CONFIG_CMD_JFFS2
 #define CONFIG_CMD_NAND