ns16550: move CONFIG_SYS_NS16550 to Kconfig

[people/ms/u-boot.git] / include / configs / xpedite537x.h

diff --git a/include/configs/xpedite537x.h b/include/configs/xpedite537x.h
index 46f1c903f1356e617ee2572fc219b6d2eb18ba14..8b4d4d96fd8e6e7eecbae2af3974a0da5ad24745 100644 (file)
--- a/include/configs/xpedite537x.h
+++ b/include/configs/xpedite537x.h
@@ -2,23 +2,7 @@
  * Copyright 2008 Extreme Engineering Solutions, Inc.
  * Copyright 2007-2008 Freescale Semiconductor, Inc.
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 /*
@@ -32,12 +16,12 @@
  */
 #define CONFIG_BOOKE           1       /* BOOKE */
 #define CONFIG_E500            1       /* BOOKE e500 family */
-#define CONFIG_MPC85xx         1       /* MPC8540/60/55/41/48 */
 #define CONFIG_MPC8572         1
 #define CONFIG_XPEDITE5370     1
 #define CONFIG_SYS_BOARD_NAME  "XPedite5370"
 #define CONFIG_SYS_FORM_3U_VPX 1
 #define CONFIG_BOARD_EARLY_INIT_R      /* Call board_pre_init */
+#define CONFIG_DISPLAY_BOARDINFO
 
 #ifndef CONFIG_SYS_TEXT_BASE
 #define CONFIG_SYS_TEXT_BASE   0xfff80000
@@ -49,6 +33,7 @@
 #define CONFIG_PCIE1           1       /* PCIE controler 1 */
 #define CONFIG_PCIE2           1       /* PCIE controler 2 */
 #define CONFIG_FSL_PCI_INIT    1       /* Use common FSL init code */
+#define CONFIG_PCI_INDIRECT_BRIDGE 1   /* indirect PCI bridge support */
 #define CONFIG_SYS_PCI_64BIT   1       /* enable 64-bit PCI resources */
 #define CONFIG_FSL_PCIE_RESET  1       /* need PCIe reset errata */
 #define CONFIG_FSL_LAW         1       /* Use common FSL init code */
@@ -64,7 +49,7 @@
 /*
  * DDR config
  */
-#define CONFIG_FSL_DDR2
+#define CONFIG_SYS_FSL_DDR2
 #undef CONFIG_FSL_DDR_INTERACTIVE
 #define CONFIG_SPD_EEPROM              /* Use SPD EEPROM for DDR setup */
 #define CONFIG_DDR_SPD
@@ -145,8 +130,6 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
 #define CONFIG_SYS_NAND_BASE_LIST      {CONFIG_SYS_NAND_BASE, \
                                         CONFIG_SYS_NAND_BASE2}
 #define CONFIG_SYS_MAX_NAND_DEVICE     2
-#define CONFIG_MTD_NAND_VERIFY_WRITE
-#define CONFIG_SYS_NAND_QUIET_TEST     /* 2nd NAND flash not always populated */
 #define CONFIG_NAND_FSL_ELBC
 
 /*
@@ -230,7 +213,6 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
  * Serial Port
  */
 #define CONFIG_CONS_INDEX              1
-#define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE    1
 #define CONFIG_SYS_NS16550_CLK         get_bus_freq(0)
@@ -257,13 +239,15 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
 /*
  * I2C
  */
-#define CONFIG_FSL_I2C                         /* Use FSL common I2C driver */
-#define CONFIG_HARD_I2C                                /* I2C with hardware support */
-#define CONFIG_SYS_I2C_SPEED           400000  /* I2C speed and slave address */
-#define CONFIG_SYS_I2C_SLAVE           0x7F
-#define CONFIG_SYS_I2C_OFFSET          0x3000
-#define CONFIG_SYS_I2C2_OFFSET         0x3100
-#define CONFIG_I2C_MULTI_BUS
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED       400000
+#define CONFIG_SYS_FSL_I2C_SLAVE       0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET      0x3000
+#define CONFIG_SYS_FSL_I2C2_SPEED      400000
+#define CONFIG_SYS_FSL_I2C2_SLAVE      0x7F
+#define CONFIG_SYS_FSL_I2C2_OFFSET     0x3100
+#define CONFIG_SYS_I2C_NOPROBES                { {0, 0x69} }
 
 /* PEX8518 slave I2C interface */
 #define CONFIG_SYS_I2C_PEX8518_ADDR    0x70
@@ -394,8 +378,6 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
 /*
  * Command configuration.
  */
-#include <config_cmd_default.h>
-
 #define CONFIG_CMD_ASKENV
 #define CONFIG_CMD_DATE
 #define CONFIG_CMD_DHCP
@@ -403,19 +385,15 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
 #define CONFIG_CMD_DS4510_INFO
 #define CONFIG_CMD_DTT
 #define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_ELF
-#define CONFIG_CMD_FLASH
 #define CONFIG_CMD_I2C
 #define CONFIG_CMD_JFFS2
 #define CONFIG_CMD_MII
 #define CONFIG_CMD_NAND
-#define CONFIG_CMD_NET
 #define CONFIG_CMD_PCA953X
 #define CONFIG_CMD_PCA953X_INFO
 #define CONFIG_CMD_PCI
 #define CONFIG_CMD_PCI_ENUM
 #define CONFIG_CMD_PING
-#define CONFIG_CMD_SAVEENV
 #define CONFIG_CMD_SNTP
 #define CONFIG_CMD_REGINFO
 
@@ -424,12 +402,10 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
  */
 #define CONFIG_SYS_LONGHELP                    /* undef to save memory */
 #define CONFIG_SYS_LOAD_ADDR   0x2000000       /* default load address */
-#define CONFIG_SYS_PROMPT      "=> "           /* Monitor Command Prompt */
 #define CONFIG_SYS_CBSIZE      256             /* Console I/O Buffer Size */
 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
 #define CONFIG_SYS_MAXARGS     16              /* max number of command args */
 #define CONFIG_SYS_BARGSIZE    CONFIG_SYS_CBSIZE       /* Boot Argument Buffer Size */
-#define CONFIG_SYS_HZ          1000            /* decrementer freq: 1ms ticks */
 #define CONFIG_CMDLINE_EDITING 1               /* add command line history     */
 #define CONFIG_AUTO_COMPLETE   1               /* add autocompletion support */
 #define CONFIG_LOADADDR                0x1000000       /* default location for tftp and bootm */