Convert CONFIG_BOOTP_BOOTPATH et al to Kconfig

[people/ms/u-boot.git] / include / configs / xpedite537x.h

diff --git a/include/configs/xpedite537x.h b/include/configs/xpedite537x.h
index ce1ff86135c157e3b05c58367f317909888a13bd..ea4773c44574d72e2b8292ce0bc8557fa6c5937f 100644 (file)
--- a/include/configs/xpedite537x.h
+++ b/include/configs/xpedite537x.h
@@ -18,10 +18,6 @@
 #define CONFIG_SYS_FORM_3U_VPX 1
 #define CONFIG_BOARD_EARLY_INIT_R      /* Call board_pre_init */
 
-#ifndef CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_TEXT_BASE   0xfff80000
-#endif
-
 #define CONFIG_PCI_SCAN_SHOW   1       /* show pci devices on startup */
 #define CONFIG_PCIE1           1       /* PCIE controller 1 */
 #define CONFIG_PCIE2           1       /* PCIE controller 2 */
@@ -81,16 +77,6 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
 #define CONFIG_SYS_MEMTEST_END         0x20000000
 #define CONFIG_POST                    (CONFIG_SYS_POST_MEMORY | \
                                         CONFIG_SYS_POST_I2C)
-#define I2C_ADDR_LIST                  {CONFIG_SYS_I2C_DS1621_ADDR,    \
-                                        CONFIG_SYS_I2C_DS4510_ADDR,    \
-                                        CONFIG_SYS_I2C_EEPROM_ADDR,    \
-                                        CONFIG_SYS_I2C_LM90_ADDR,      \
-                                        CONFIG_SYS_I2C_PCA953X_ADDR0,  \
-                                        CONFIG_SYS_I2C_PCA953X_ADDR1,  \
-                                        CONFIG_SYS_I2C_PCA953X_ADDR2,  \
-                                        CONFIG_SYS_I2C_PCA953X_ADDR3,  \
-                                        CONFIG_SYS_I2C_PEX8518_ADDR,   \
-                                        CONFIG_SYS_I2C_RTC_ADDR}
 /* The XPedite5370 can host an XMC which has an EEPROM at address 0x50 */
 #define I2C_ADDR_IGNORE_LIST           {0x50}
 
@@ -229,9 +215,6 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
 #define CONFIG_SYS_I2C_PEX8518_ADDR    0x70
 
 /* I2C DS1631 temperature sensor */
-#define CONFIG_SYS_I2C_DS1621_ADDR     0x48
-#define CONFIG_DTT_DS1621
-#define CONFIG_DTT_SENSORS             { 0 }
 #define CONFIG_SYS_I2C_LM90_ADDR       0x4c
 
 /* I2C EEPROM - AT24C128B */
@@ -245,10 +228,6 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
 #define CONFIG_SYS_I2C_RTC_ADDR                0x68
 #define CONFIG_SYS_M41T11_BASE_YEAR    2000
 
-/* GPIO/EEPROM/SRAM */
-#define CONFIG_DS4510
-#define CONFIG_SYS_I2C_DS4510_ADDR     0x51
-
 /* GPIO */
 #define CONFIG_PCA953X
 #define CONFIG_SYS_I2C_PCA953X_ADDR0   0x18
@@ -321,7 +300,6 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
  * Networking options
  */
 #define CONFIG_TSEC_ENET               /* tsec ethernet support */
-#define CONFIG_PHY_GIGE                1       /* Include GbE speed/duplex detection */
 #define CONFIG_TSEC_TBI
 #define CONFIG_MII             1       /* MII PHY management */
 #define CONFIG_MII_DEFAULT_TSEC        1       /* Allow unregistered phys */
@@ -351,33 +329,11 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
 #define TSEC2_PHYIDX           0
 #define CONFIG_HAS_ETH1
 
-/*
- * Command configuration.
- */
-#define CONFIG_CMD_DS4510
-#define CONFIG_CMD_DTT
-#define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_JFFS2
-#define CONFIG_CMD_NAND
-#define CONFIG_CMD_PCA953X
-#define CONFIG_CMD_PCA953X_INFO
-#define CONFIG_CMD_PCI
-#define CONFIG_CMD_PCI_ENUM
-#define CONFIG_CMD_REGINFO
-
 /*
  * Miscellaneous configurable options
  */
-#define CONFIG_SYS_LONGHELP                    /* undef to save memory */
 #define CONFIG_SYS_LOAD_ADDR   0x2000000       /* default load address */
-#define CONFIG_SYS_CBSIZE      256             /* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS     16              /* max number of command args */
-#define CONFIG_SYS_BARGSIZE    CONFIG_SYS_CBSIZE       /* Boot Argument Buffer Size */
-#define CONFIG_CMDLINE_EDITING 1               /* add command line history     */
-#define CONFIG_AUTO_COMPLETE   1               /* add autocompletion support */
 #define CONFIG_LOADADDR                0x1000000       /* default location for tftp and bootm */
-#define CONFIG_PANIC_HANG                      /* do not reset board on panic */
 #define CONFIG_PREBOOT                         /* enable preboot variable */
 #define CONFIG_INTEGRITY                       /* support booting INTEGRITY OS */
 
@@ -392,7 +348,6 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
 /*
  * Environment Configuration
  */
-#define CONFIG_ENV_IS_IN_FLASH 1
 #define CONFIG_ENV_SECT_SIZE   0x20000         /* 128k (one sector) for env */
 #define CONFIG_ENV_SIZE                0x8000
 #define CONFIG_ENV_ADDR                (CONFIG_SYS_MONITOR_BASE - (256 * 1024))