Convert CONFIG_CMD_JFFS2 to Kconfig

[people/ms/u-boot.git] / include / configs / xpedite550x.h

diff --git a/include/configs/xpedite550x.h b/include/configs/xpedite550x.h
index 213dfa76d87e0b95214e0df6cb242a880977c8ad..254fc12cf6af6952d1adc13348f0934c9f706f29 100644 (file)
--- a/include/configs/xpedite550x.h
+++ b/include/configs/xpedite550x.h
@@ -14,9 +14,6 @@
 /*
  * High Level Configuration Options
  */
-#define CONFIG_BOOKE           1       /* BOOKE */
-#define CONFIG_E500            1       /* BOOKE e500 family */
-#define CONFIG_P2020           1
 #define CONFIG_XPEDITE550X     1
 #define CONFIG_SYS_BOARD_NAME  "XPedite5500"
 #define CONFIG_SYS_FORM_PMC_XMC        1
@@ -27,16 +24,12 @@
 #define CONFIG_SYS_TEXT_BASE   0xfff80000
 #endif
 
-#define CONFIG_PCI             1       /* Enable PCI/PCIE */
-#define CONFIG_PCI_PNP         1       /* do pci plug-and-play */
 #define CONFIG_PCI_SCAN_SHOW   1       /* show pci devices on startup */
 #define CONFIG_PCIE1           1       /* PCIE controller 1 (PEX8112 or XMC) */
 #define CONFIG_FSL_PCI_INIT    1       /* Use common FSL init code */
 #define CONFIG_PCI_INDIRECT_BRIDGE 1   /* indirect PCI bridge support */
 #define CONFIG_SYS_PCI_64BIT   1       /* enable 64-bit PCI resources */
 #define CONFIG_FSL_PCIE_RESET  1       /* need PCIe reset errata */
-#define CONFIG_FSL_LAW         1       /* Use common FSL init code */
-#define CONFIG_FSL_ELBC                1
 
 /*
  * Multicore config
@@ -48,13 +41,11 @@
 /*
  * DDR config
  */
-#define CONFIG_SYS_FSL_DDR3
 #define CONFIG_SPD_EEPROM              /* Use SPD EEPROM for DDR setup */
 #define CONFIG_DDR_SPD
 #define CONFIG_MEM_INIT_VALUE          0xdeadbeef
 #define SPD_EEPROM_ADDRESS                     0x54
 #define SPD_EEPROM_OFFSET              0x200   /* OFFSET of SPD in EEPROM */
-#define CONFIG_NUM_DDR_CONTROLLERS     1
 #define CONFIG_DIMM_SLOTS_PER_CTLR     1
 #define CONFIG_CHIP_SELECTS_PER_CTRL 2
 #define CONFIG_DDR_ECC
@@ -210,7 +201,6 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
 #define CONFIG_SYS_NS16550_COM2        (CONFIG_SYS_CCSRBAR+0x4600)
 #define CONFIG_SYS_BAUDRATE_TABLE      \
        {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200}
-#define CONFIG_BAUDRATE                        115200
 #define CONFIG_LOADS_ECHO              1       /* echo on for serial download */
 #define CONFIG_SYS_LOADS_BAUD_CHANGE   1       /* allow baudrate change */
 
@@ -229,8 +219,6 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
 #define CONFIG_SYS_FSL_I2C2_OFFSET     0x3100
 
 /* I2C DS7505 temperature sensor */
-#define CONFIG_DTT_LM75
-#define CONFIG_DTT_SENSORS             { 0 }
 #define CONFIG_SYS_I2C_LM75_ADDR       0x48
 
 /* I2C ADT7461 temperature sensor */
@@ -342,18 +330,12 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
 /*
  * USB
  */
-#define CONFIG_USB_EHCI
 #define CONFIG_USB_EHCI_FSL
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
-#define CONFIG_DOS_PARTITION
 
 /*
  * Command configuration.
  */
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_DTT
-#define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_JFFS2
 #define CONFIG_CMD_NAND
 #define CONFIG_CMD_PCA953X
 #define CONFIG_CMD_PCA953X_INFO