bootstage: Record the time taken to set up driver model

[people/ms/u-boot.git] / include / dwmmc.h

diff --git a/include/dwmmc.h b/include/dwmmc.h
index 335af51fdf42e72f4e19058cfdff4a1f29dfe520..4dda0091cefc1e7773213f3968e4ff8111b5b971 100644 (file)
--- a/include/dwmmc.h
+++ b/include/dwmmc.h
@@ -105,7 +105,7 @@
 
 /* Status Register */
 #define DWMCI_BUSY             (1 << 9)
-#define DWMCI_FIFO_MASK                0x1ff
+#define DWMCI_FIFO_MASK                0x1fff
 #define DWMCI_FIFO_SHIFT       17
 
 /* FIFOTH Register */
@@ -224,9 +224,77 @@ static inline u8 dwmci_readb(struct dwmci_host *host, int reg)
        return readb(host->ioaddr + reg);
 }
 
-void dwmci_setup_cfg(struct mmc_config *cfg, const char *name, int buswidth,
-                    uint caps, u32 max_clk, u32 min_clk);
+#ifdef CONFIG_BLK
+/**
+ * dwmci_setup_cfg() - Set up the configuration for DWMMC
+ *
+ * This is used to set up a DWMMC device when you are using CONFIG_BLK.
+ *
+ * This should be called from your MMC driver's probe() method once you have
+ * the information required.
+ *
+ * Generally your driver will have a platform data structure which holds both
+ * the configuration (struct mmc_config) and the MMC device info (struct mmc).
+ * For example:
+ *
+ * struct rockchip_mmc_plat {
+ *     struct mmc_config cfg;
+ *     struct mmc mmc;
+ * };
+ *
+ * ...
+ *
+ * Inside U_BOOT_DRIVER():
+ *     .platdata_auto_alloc_size = sizeof(struct rockchip_mmc_plat),
+ *
+ * To access platform data:
+ *     struct rockchip_mmc_plat *plat = dev_get_platdata(dev);
+ *
+ * See rockchip_dw_mmc.c for an example.
+ *
+ * @cfg:       Configuration structure to fill in (generally &plat->mmc)
+ * @host:      DWMMC host
+ * @max_clk:   Maximum supported clock speed in HZ (e.g. 150000000)
+ * @min_clk:   Minimum supported clock speed in HZ (e.g. 400000)
+ */
+void dwmci_setup_cfg(struct mmc_config *cfg, struct dwmci_host *host,
+               u32 max_clk, u32 min_clk);
+
+/**
+ * dwmci_bind() - Set up a new MMC block device
+ *
+ * This is used to set up a DWMMC block device when you are using CONFIG_BLK.
+ * It should be called from your driver's bind() method.
+ *
+ * See rockchip_dw_mmc.c for an example.
+ *
+ * @dev:       Device to set up
+ * @mmc:       Pointer to mmc structure (normally &plat->mmc)
+ * @cfg:       Empty configuration structure (generally &plat->cfg). This is
+ *             normally all zeroes at this point. The only purpose of passing
+ *             this in is to set mmc->cfg to it.
+ * @return 0 if OK, -ve if the block device could not be created
+ */
 int dwmci_bind(struct udevice *dev, struct mmc *mmc, struct mmc_config *cfg);
 
+#else
+/**
+ * add_dwmci() - Add a new DWMMC interface
+ *
+ * This is used when you are not using CONFIG_BLK. Convert your driver over!
+ *
+ * @host:      DWMMC host structure
+ * @max_clk:   Maximum supported clock speed in HZ (e.g. 150000000)
+ * @min_clk:   Minimum supported clock speed in HZ (e.g. 400000)
+ * @return 0 if OK, -ve on error
+ */
 int add_dwmci(struct dwmci_host *host, u32 max_clk, u32 min_clk);
+#endif /* !CONFIG_BLK */
+
+#ifdef CONFIG_DM_MMC_OPS
+/* Export the operations to drivers */
+int dwmci_probe(struct udevice *dev);
+extern const struct dm_mmc_ops dm_dwmci_ops;
+#endif
+
 #endif /* __DWMMC_HW_H */