const char *prop, const u32 dflt);
u32 fdt_getprop_u32_default(const void *fdt, const char *path,
const char *prop, const u32 dflt);
+
+/**
+ * Add data to the root of the FDT before booting the OS.
+ *
+ * See doc/device-tree-bindings/root.txt
+ *
+ * @param fdt FDT address in memory
+ * @return 0 if ok, or -FDT_ERR_... on error
+ */
+int fdt_root(void *fdt);
+
+/**
+ * Add chosen data the FDT before booting the OS.
+ *
+ * In particular, this adds the kernel command line (bootargs) to the FDT.
+ *
+ * @param fdt FDT address in memory
+ * @return 0 if ok, or -FDT_ERR_... on error
+ */
int fdt_chosen(void *fdt);
+
+/**
+ * Add initrd information to the FDT before booting the OS.
+ *
+ * @param fdt FDT address in memory
+ * @return 0 if ok, or -FDT_ERR_... on error
+ */
int fdt_initrd(void *fdt, ulong initrd_start, ulong initrd_end);
+
void do_fixup_by_path(void *fdt, const char *path, const char *prop,
const void *val, int len, int create);
void do_fixup_by_path_u32(void *fdt, const char *path, const char *prop,
const char *prop, const void *val, int len, int create);
void do_fixup_by_compat_u32(void *fdt, const char *compat,
const char *prop, u32 val, int create);
+/**
+ * Setup the memory node in the DT. Creates one if none was existing before.
+ * Calls fdt_fixup_memory_banks() to populate a single reg pair covering the
+ * whole memory.
+ *
+ * @param blob FDT blob to update
+ * @param start Begin of DRAM mapping in physical memory
+ * @param size Size of the single memory bank
+ * @return 0 if ok, or -1 or -FDT_ERR_... on error
+ */
int fdt_fixup_memory(void *blob, u64 start, u64 size);
+
+/**
+ * Fill the DT memory node with multiple memory banks.
+ * Creates the node if none was existing before.
+ * If banks is 0, it will not touch the existing reg property. This allows
+ * boards to not mess with the existing DT setup, which may have been
+ * filled in properly before.
+ *
+ * @param blob FDT blob to update
+ * @param start Array of size <banks> to hold the start addresses.
+ * @param size Array of size <banks> to hold the size of each region.
+ * @param banks Number of memory banks to create. If 0, the reg
+ * property will be left untouched.
+ * @return 0 if ok, or -1 or -FDT_ERR_... on error
+ */
int fdt_fixup_memory_banks(void *blob, u64 start[], u64 size[], int banks);
+
void fdt_fixup_ethernet(void *fdt);
int fdt_find_and_setprop(void *fdt, const char *node, const char *prop,
const void *val, int len, int create);
void fdt_fixup_qe_firmware(void *fdt);
-#if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB)
+/**
+ * Update native-mode property of display-timings node to the phandle
+ * of the timings matching a display by name (case insensitive).
+ *
+ * see kernel Documentation/devicetree/bindings/video/display-timing.txt
+ *
+ * @param blob FDT blob to update
+ * @param path path within dt
+ * @param display name of display timing to match
+ * @return 0 if ok, or -FDT_ERR_... on error
+ */
+int fdt_fixup_display(void *blob, const char *path, const char *display);
+
+#if defined(CONFIG_USB_EHCI_FSL) || defined(CONFIG_USB_XHCI_FSL)
void fdt_fixup_dr_usb(void *blob, bd_t *bd);
#else
static inline void fdt_fixup_dr_usb(void *blob, bd_t *bd) {}
-#endif /* defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB) */
+#endif /* defined(CONFIG_USB_EHCI_FSL) || defined(CONFIG_USB_XHCI_FSL) */
#if defined(CONFIG_SYS_FSL_SEC_COMPAT)
void fdt_fixup_crypto_node(void *blob, int sec_rev);
int fdt_pci_dma_ranges(void *blob, int phb_off, struct pci_controller *hose);
#endif
-void ft_board_setup(void *blob, bd_t *bd);
+int fdt_find_or_add_subnode(void *fdt, int parentoffset, const char *name);
+
+/**
+ * Add board-specific data to the FDT before booting the OS.
+ *
+ * Use CONFIG_SYS_FDT_PAD to ensure there is sufficient space.
+ * This function is called if CONFIG_OF_BOARD_SETUP is defined
+ *
+ * @param blob FDT blob to update
+ * @param bd_t Pointer to board data
+ * @return 0 if ok, or -FDT_ERR_... on error
+ */
+int ft_board_setup(void *blob, bd_t *bd);
+
/*
* The keystone2 SOC requires all 32 bit aliased addresses to be converted
* to their 36 physical format. This has to happen after all fdt nodes
void ft_cpu_setup(void *blob, bd_t *bd);
void ft_pci_setup(void *blob, bd_t *bd);
-void set_working_fdt_addr(void *addr);
-int fdt_resize(void *blob);
+/**
+ * Add system-specific data to the FDT before booting the OS.
+ *
+ * Use CONFIG_SYS_FDT_PAD to ensure there is sufficient space.
+ * This function is called if CONFIG_OF_SYSTEM_SETUP is defined
+ *
+ * @param blob FDT blob to update
+ * @param bd_t Pointer to board data
+ * @return 0 if ok, or -FDT_ERR_... on error
+ */
+int ft_system_setup(void *blob, bd_t *bd);
+
+void set_working_fdt_addr(ulong addr);
+int fdt_shrink_to_minimum(void *blob);
int fdt_increase_size(void *fdt, int add_len);
int fdt_fixup_nor_flash_size(void *blob);
+#if defined(CONFIG_FDT_FIXUP_PARTITIONS)
void fdt_fixup_mtdparts(void *fdt, void *node_info, int node_info_size);
+#else
+static inline void fdt_fixup_mtdparts(void *fdt, void *node_info,
+ int node_info_size) {}
+#endif
+
void fdt_del_node_and_alias(void *blob, const char *alias);
-u64 fdt_translate_address(void *blob, int node_offset, const __be32 *in_addr);
+u64 fdt_translate_address(const void *blob, int node_offset,
+ const __be32 *in_addr);
int fdt_node_offset_by_compat_reg(void *blob, const char *compat,
phys_addr_t compat_off);
int fdt_alloc_phandle(void *blob);
{
return fdt_set_node_status(fdt, nodeoffset, FDT_STATUS_DISABLED, 0);
}
+static inline int fdt_status_fail(void *fdt, int nodeoffset)
+{
+ return fdt_set_node_status(fdt, nodeoffset, FDT_STATUS_FAIL, 0);
+}
-int fdt_set_status_by_alias(void *fdt, const char* alias,
+int fdt_set_status_by_alias(void *fdt, const char *alias,
enum fdt_status status, unsigned int error_code);
-static inline int fdt_status_okay_by_alias(void *fdt, const char* alias)
+static inline int fdt_status_okay_by_alias(void *fdt, const char *alias)
{
return fdt_set_status_by_alias(fdt, alias, FDT_STATUS_OKAY, 0);
}
-static inline int fdt_status_disabled_by_alias(void *fdt, const char* alias)
+static inline int fdt_status_disabled_by_alias(void *fdt, const char *alias)
{
return fdt_set_status_by_alias(fdt, alias, FDT_STATUS_DISABLED, 0);
}
+static inline int fdt_status_fail_by_alias(void *fdt, const char *alias)
+{
+ return fdt_set_status_by_alias(fdt, alias, FDT_STATUS_FAIL, 0);
+}
+
+/* Helper to read a big number; size is in cells (not bytes) */
+static inline u64 of_read_number(const fdt32_t *cell, int size)
+{
+ u64 r = 0;
+ while (size--)
+ r = (r << 32) | fdt32_to_cpu(*(cell++));
+ return r;
+}
+
+void of_bus_default_count_cells(const void *blob, int parentoffset,
+ int *addrc, int *sizec);
+int ft_verify_fdt(void *fdt);
+int arch_fixup_memory_node(void *blob);
+
+int fdt_setup_simplefb_node(void *fdt, int node, u64 base_address, u32 width,
+ u32 height, u32 stride, const char *format);
#endif /* ifdef CONFIG_OF_LIBFDT */
projects / people / ms / u-boot.git / blobdiff