const char *prop, const u32 dflt);
u32 fdt_getprop_u32_default(const void *fdt, const char *path,
const char *prop, const u32 dflt);
+
+/**
+ * Add data to the root of the FDT before booting the OS.
+ *
+ * See doc/device-tree-bindings/root.txt
+ *
+ * @param fdt FDT address in memory
+ * @return 0 if ok, or -FDT_ERR_... on error
+ */
+int fdt_root(void *fdt);
+
+/**
+ * Add chosen data the FDT before booting the OS.
+ *
+ * In particular, this adds the kernel command line (bootargs) to the FDT.
+ *
+ * @param fdt FDT address in memory
+ * @return 0 if ok, or -FDT_ERR_... on error
+ */
int fdt_chosen(void *fdt);
+
+/**
+ * Add initrd information to the FDT before booting the OS.
+ *
+ * @param fdt FDT address in memory
+ * @return 0 if ok, or -FDT_ERR_... on error
+ */
int fdt_initrd(void *fdt, ulong initrd_start, ulong initrd_end);
+
void do_fixup_by_path(void *fdt, const char *path, const char *prop,
const void *val, int len, int create);
void do_fixup_by_path_u32(void *fdt, const char *path, const char *prop,
const char *prop, const void *val, int len, int create);
void do_fixup_by_compat_u32(void *fdt, const char *compat,
const char *prop, u32 val, int create);
+/**
+ * Setup the memory node in the DT. Creates one if none was existing before.
+ * Calls fdt_fixup_memory_banks() to populate a single reg pair covering the
+ * whole memory.
+ *
+ * @param blob FDT blob to update
+ * @param start Begin of DRAM mapping in physical memory
+ * @param size Size of the single memory bank
+ * @return 0 if ok, or -1 or -FDT_ERR_... on error
+ */
int fdt_fixup_memory(void *blob, u64 start, u64 size);
+
+/**
+ * Fill the DT memory node with multiple memory banks.
+ * Creates the node if none was existing before.
+ * If banks is 0, it will not touch the existing reg property. This allows
+ * boards to not mess with the existing DT setup, which may have been
+ * filled in properly before.
+ *
+ * @param blob FDT blob to update
+ * @param start Array of size <banks> to hold the start addresses.
+ * @param size Array of size <banks> to hold the size of each region.
+ * @param banks Number of memory banks to create. If 0, the reg
+ * property will be left untouched.
+ * @return 0 if ok, or -1 or -FDT_ERR_... on error
+ */
+#ifdef CONFIG_ARCH_FIXUP_FDT_MEMORY
int fdt_fixup_memory_banks(void *blob, u64 start[], u64 size[], int banks);
+#else
+static inline int fdt_fixup_memory_banks(void *blob, u64 start[], u64 size[],
+ int banks)
+{
+ return 0;
+}
+#endif
+
void fdt_fixup_ethernet(void *fdt);
int fdt_find_and_setprop(void *fdt, const char *node, const char *prop,
const void *val, int len, int create);
void fdt_fixup_qe_firmware(void *fdt);
-#if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB)
-void fdt_fixup_dr_usb(void *blob, bd_t *bd);
+/**
+ * Update native-mode property of display-timings node to the phandle
+ * of the timings matching a display by name (case insensitive).
+ *
+ * see kernel Documentation/devicetree/bindings/video/display-timing.txt
+ *
+ * @param blob FDT blob to update
+ * @param path path within dt
+ * @param display name of display timing to match
+ * @return 0 if ok, or -FDT_ERR_... on error
+ */
+int fdt_fixup_display(void *blob, const char *path, const char *display);
+
+#if defined(CONFIG_USB_EHCI_FSL) || defined(CONFIG_USB_XHCI_FSL)
+void fsl_fdt_fixup_dr_usb(void *blob, bd_t *bd);
#else
-static inline void fdt_fixup_dr_usb(void *blob, bd_t *bd) {}
-#endif /* defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB) */
+static inline void fsl_fdt_fixup_dr_usb(void *blob, bd_t *bd) {}
+#endif /* defined(CONFIG_USB_EHCI_FSL) || defined(CONFIG_USB_XHCI_FSL) */
#if defined(CONFIG_SYS_FSL_SEC_COMPAT)
void fdt_fixup_crypto_node(void *blob, int sec_rev);
static inline void fdt_fixup_crypto_node(void *blob, int sec_rev) {}
#endif
+/**
+ * Record information about a processed loadable in /fit-images (creating
+ * /fit-images if necessary).
+ *
+ * @param blob FDT blob to update
+ * @param index index of this loadable
+ * @param name name of the loadable
+ * @param load_addr address the loadable was loaded to
+ * @param size number of bytes loaded
+ * @param entry_point entry point (if specified, otherwise pass -1)
+ * @param type type (if specified, otherwise pass NULL)
+ * @param os os-type (if specified, otherwise pass NULL)
+ * @return 0 if ok, or -1 or -FDT_ERR_... on error
+ */
+int fdt_record_loadable(void *blob, u32 index, const char *name,
+ uintptr_t load_addr, u32 size, uintptr_t entry_point,
+ const char *type, const char *os);
+
#ifdef CONFIG_PCI
#include <pci.h>
int fdt_pci_dma_ranges(void *blob, int phb_off, struct pci_controller *hose);
#endif
-void ft_board_setup(void *blob, bd_t *bd);
+int fdt_find_or_add_subnode(void *fdt, int parentoffset, const char *name);
+
+/**
+ * Add board-specific data to the FDT before booting the OS.
+ *
+ * Use CONFIG_SYS_FDT_PAD to ensure there is sufficient space.
+ * This function is called if CONFIG_OF_BOARD_SETUP is defined
+ *
+ * @param blob FDT blob to update
+ * @param bd_t Pointer to board data
+ * @return 0 if ok, or -FDT_ERR_... on error
+ */
+int ft_board_setup(void *blob, bd_t *bd);
+
/*
* The keystone2 SOC requires all 32 bit aliased addresses to be converted
* to their 36 physical format. This has to happen after all fdt nodes
void ft_cpu_setup(void *blob, bd_t *bd);
void ft_pci_setup(void *blob, bd_t *bd);
-void set_working_fdt_addr(void *addr);
-int fdt_shrink_to_minimum(void *blob);
+/**
+ * Add system-specific data to the FDT before booting the OS.
+ *
+ * Use CONFIG_SYS_FDT_PAD to ensure there is sufficient space.
+ * This function is called if CONFIG_OF_SYSTEM_SETUP is defined
+ *
+ * @param blob FDT blob to update
+ * @param bd_t Pointer to board data
+ * @return 0 if ok, or -FDT_ERR_... on error
+ */
+int ft_system_setup(void *blob, bd_t *bd);
+
+void set_working_fdt_addr(ulong addr);
+
+/**
+ * shrink down the given blob to minimum size + some extrasize if required
+ *
+ * @param blob FDT blob to update
+ * @param extrasize additional bytes needed
+ * @return 0 if ok, or -FDT_ERR_... on error
+ */
+int fdt_shrink_to_minimum(void *blob, uint extrasize);
int fdt_increase_size(void *fdt, int add_len);
int fdt_fixup_nor_flash_size(void *blob);
+#if defined(CONFIG_FDT_FIXUP_PARTITIONS)
void fdt_fixup_mtdparts(void *fdt, void *node_info, int node_info_size);
+#else
+static inline void fdt_fixup_mtdparts(void *fdt, void *node_info,
+ int node_info_size) {}
+#endif
+
void fdt_del_node_and_alias(void *blob, const char *alias);
-u64 fdt_translate_address(void *blob, int node_offset, const __be32 *in_addr);
+u64 fdt_translate_address(const void *blob, int node_offset,
+ const __be32 *in_addr);
int fdt_node_offset_by_compat_reg(void *blob, const char *compat,
phys_addr_t compat_off);
int fdt_alloc_phandle(void *blob);
int fdt_verify_alias_address(void *fdt, int anode, const char *alias,
u64 addr);
-u64 fdt_get_base_address(void *fdt, int node);
+u64 fdt_get_base_address(const void *fdt, int node);
int fdt_read_range(void *fdt, int node, int n, uint64_t *child_addr,
uint64_t *addr, uint64_t *len);
return fdt_set_status_by_alias(fdt, alias, FDT_STATUS_FAIL, 0);
}
+/* Helper to read a big number; size is in cells (not bytes) */
+static inline u64 fdt_read_number(const fdt32_t *cell, int size)
+{
+ u64 r = 0;
+ while (size--)
+ r = (r << 32) | fdt32_to_cpu(*(cell++));
+ return r;
+}
+
+void fdt_support_default_count_cells(const void *blob, int parentoffset,
+ int *addrc, int *sizec);
+int ft_verify_fdt(void *fdt);
+int arch_fixup_memory_node(void *blob);
+
+int fdt_setup_simplefb_node(void *fdt, int node, u64 base_address, u32 width,
+ u32 height, u32 stride, const char *format);
+
+int fdt_overlay_apply_verbose(void *fdt, void *fdto);
+
#endif /* ifdef CONFIG_OF_LIBFDT */
#ifdef USE_HOSTCC
int fdtdec_get_int(const void *blob, int node, const char *prop_name,
int default_val);
#endif
+#ifdef CONFIG_FMAN_ENET
+int fdt_update_ethernet_dt(void *blob);
+#endif
#endif /* ifndef __FDT_SUPPORT_H */
projects / people / ms / u-boot.git / blobdiff