net: Remove Xilinx ll_temac driver

[people/ms/u-boot.git] / include / netdev.h

diff --git a/include/netdev.h b/include/netdev.h
index 244f23f93c366b5eb867a2d2364706c34cf871dd..3958a4cd32dd23653fcac286d4be8555989a1fdd 100644 (file)
--- a/include/netdev.h
+++ b/include/netdev.h
@@ -50,7 +50,6 @@ int fecmxc_initialize_multi(bd_t *bis, int dev_id, int phy_id, uint32_t addr);
 int ftgmac100_initialize(bd_t *bits);
 int ftmac100_initialize(bd_t *bits);
 int ftmac110_initialize(bd_t *bits);
-int greth_initialize(bd_t *bis);
 void gt6426x_eth_initialize(bd_t *bis);
 int ks8851_mll_initialize(u8 dev_num, int base_addr);
 int lan91c96_initialize(u8 dev_num, int base_addr);
@@ -58,9 +57,6 @@ int lpc32xx_eth_initialize(bd_t *bis);
 int macb_eth_initialize(int id, void *regs, unsigned int phy_addr);
 int mcdmafec_initialize(bd_t *bis);
 int mcffec_initialize(bd_t *bis);
-int mpc512x_fec_initialize(bd_t *bis);
-int mpc5xxx_fec_initialize(bd_t *bis);
-int mpc82xx_scc_enet_initialize(bd_t *bis);
 int mvgbe_initialize(bd_t *bis);
 int mvneta_initialize(bd_t *bis, int base_addr, int devnum, int phy_addr);
 int natsemi_initialize(bd_t *bis);
@@ -80,17 +76,6 @@ int tsi108_eth_initialize(bd_t *bis);
 int uec_standard_init(bd_t *bis);
 int uli526x_initialize(bd_t *bis);
 int armada100_fec_register(unsigned long base_addr);
-int xilinx_ll_temac_eth_init(bd_t *bis, unsigned long base_addr, int flags,
-                                               unsigned long ctrl_addr);
-/*
- * As long as the Xilinx xps_ll_temac ethernet driver has not its own interface
- * exported by a public hader file, we need a global definition at this point.
- */
-#if defined(CONFIG_XILINX_LL_TEMAC)
-#define XILINX_LL_TEMAC_M_FIFO         0       /* use FIFO Ctrl */
-#define XILINX_LL_TEMAC_M_SDMA_PLB     (1 << 0)/* use SDMA Ctrl via PLB */
-#define XILINX_LL_TEMAC_M_SDMA_DCR     (1 << 1)/* use SDMA Ctrl via DCR */
-#endif
 
 /* Boards with PCI network controllers can call this from their board_eth_init()
  * function to initialize whatever's on board.
@@ -134,65 +119,12 @@ static inline int pci_eth_init(bd_t *bis)
        return num;
 }
 
-/*
- * Boards with mv88e61xx switch can use this by defining
- * CONFIG_MV88E61XX_SWITCH in respective board configheader file
- * the stuct and enums here are used to specify switch configuration params
- */
-#if defined(CONFIG_MV88E61XX_SWITCH)
-
-/* constants for any 88E61xx switch */
-#define MV88E61XX_MAX_PORTS_NUM        6
-
-enum mv88e61xx_cfg_mdip {
-       MV88E61XX_MDIP_NOCHANGE,
-       MV88E61XX_MDIP_REVERSE
-};
-
-enum mv88e61xx_cfg_ledinit {
-       MV88E61XX_LED_INIT_DIS,
-       MV88E61XX_LED_INIT_EN
-};
-
-enum mv88e61xx_cfg_rgmiid {
-       MV88E61XX_RGMII_DELAY_DIS,
-       MV88E61XX_RGMII_DELAY_EN
-};
-
-enum mv88e61xx_cfg_prtstt {
-       MV88E61XX_PORTSTT_DISABLED,
-       MV88E61XX_PORTSTT_BLOCKING,
-       MV88E61XX_PORTSTT_LEARNING,
-       MV88E61XX_PORTSTT_FORWARDING
-};
-
-struct mv88e61xx_config {
-       char *name;
-       u8 vlancfg[MV88E61XX_MAX_PORTS_NUM];
-       enum mv88e61xx_cfg_rgmiid rgmii_delay;
-       enum mv88e61xx_cfg_prtstt portstate;
-       enum mv88e61xx_cfg_ledinit led_init;
-       enum mv88e61xx_cfg_mdip mdip;
-       u32 ports_enabled;
-       u8 cpuport;
-};
-
-/*
- * Common mappings for Internal VLANs
- * These mappings consider that all ports are useable; the driver
- * will mask inexistent/unused ports.
- */
-
-/* Switch mode : routes any port to any port */
-#define MV88E61XX_VLANCFG_SWITCH { 0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0x3F }
-
-/* Router mode: routes only CPU port 5 to/from non-CPU ports 0-4 */
-#define MV88E61XX_VLANCFG_ROUTER { 0x20, 0x20, 0x20, 0x20, 0x20, 0x1F }
-
-int mv88e61xx_switch_initialize(struct mv88e61xx_config *swconfig);
-#endif /* CONFIG_MV88E61XX_SWITCH */
-
+#ifdef CONFIG_DM_ETH
+struct mii_dev *fec_get_miibus(struct udevice *dev, int dev_id);
+#else
 struct mii_dev *fec_get_miibus(uint32_t base_addr, int dev_id);
+#endif
+
 #ifdef CONFIG_PHYLIB
 struct phy_device;
 int fec_probe(bd_t *bd, int dev_id, uint32_t base_addr,