arc/cache: really do invalidate_dcache_all() even if IOC exists

[people/ms/u-boot.git] / include / status_led.h

diff --git a/include/status_led.h b/include/status_led.h
index 919e3ae31b37870171a06147c87002892abc0ff6..396ea882eaccae038cb51cffb31dfb1b42a7ca1b 100644 (file)
--- a/include/status_led.h
+++ b/include/status_led.h
@@ -23,6 +23,7 @@
 #define STATUS_LED_BLINKING    1
 #define STATUS_LED_ON          2
 
+void status_led_init(void);
 void status_led_tick (unsigned long timestamp);
 void status_led_set  (int led, int state);
 
@@ -56,64 +57,6 @@ void status_led_set  (int led, int state);
 
 # define STATUS_LED_BOOT       0               /* LED 0 used for boot status */
 
-/*****  IVMS8  **********************************************************/
-#elif defined(CONFIG_IVMS8)
-
-# define STATUS_LED_PAR                im_cpm.cp_pbpar
-# define STATUS_LED_DIR                im_cpm.cp_pbdir
-# define STATUS_LED_ODR                im_cpm.cp_pbodr
-# define STATUS_LED_DAT                im_cpm.cp_pbdat
-
-# define STATUS_LED_BIT                0x00000010      /* LED 0 is on PB.27    */
-# define STATUS_LED_PERIOD     (1 * CONFIG_SYS_HZ)
-# define STATUS_LED_STATE      STATUS_LED_OFF
-# define STATUS_LED_BIT1       0x00000020      /* LED 1 is on PB.26    */
-# define STATUS_LED_PERIOD1    (1 * CONFIG_SYS_HZ)
-# define STATUS_LED_STATE1     STATUS_LED_OFF
-/* IDE LED usable for other purposes, too */
-# define STATUS_LED_BIT2       0x00000008      /* LED 2 is on PB.28    */
-# define STATUS_LED_PERIOD2    (1 * CONFIG_SYS_HZ)
-# define STATUS_LED_STATE2     STATUS_LED_OFF
-
-# define STATUS_LED_ACTIVE     1               /* LED on for bit == 1  */
-
-# define STATUS_ILOCK_SWITCH   0x00800000      /* ILOCK switch in IRQ4 */
-
-# define STATUS_ILOCK_PERIOD   (CONFIG_SYS_HZ / 10)    /* about every 100 ms   */
-
-# define STATUS_LED_YELLOW     0
-# define STATUS_LED_GREEN      1
-# define STATUS_LED_BOOT       2               /* IDE LED used for boot status */
-
-/*****  IVML24  *********************************************************/
-#elif defined(CONFIG_IVML24)
-
-# define STATUS_LED_PAR                im_cpm.cp_pbpar
-# define STATUS_LED_DIR                im_cpm.cp_pbdir
-# define STATUS_LED_ODR                im_cpm.cp_pbodr
-# define STATUS_LED_DAT                im_cpm.cp_pbdat
-
-# define STATUS_LED_BIT                0x00000010      /* LED 0 is on PB.27    */
-# define STATUS_LED_PERIOD     (1 * CONFIG_SYS_HZ)
-# define STATUS_LED_STATE      STATUS_LED_OFF
-# define STATUS_LED_BIT1       0x00000020      /* LED 1 is on PB.26    */
-# define STATUS_LED_PERIOD1    (1 * CONFIG_SYS_HZ)
-# define STATUS_LED_STATE1     STATUS_LED_OFF
-/* IDE LED usable for other purposes, too */
-# define STATUS_LED_BIT2       0x00000008      /* LED 2 is on PB.28    */
-# define STATUS_LED_PERIOD2    (1 * CONFIG_SYS_HZ)
-# define STATUS_LED_STATE2     STATUS_LED_OFF
-
-# define STATUS_LED_ACTIVE     1               /* LED on for bit == 1  */
-
-# define STATUS_ILOCK_SWITCH   0x00004000      /* ILOCK is on PB.17    */
-
-# define STATUS_ILOCK_PERIOD   (CONFIG_SYS_HZ / 10)    /* about every 100 ms   */
-
-# define STATUS_LED_YELLOW     0
-# define STATUS_LED_GREEN      1
-# define STATUS_LED_BOOT       2               /* IDE LED used for boot status */
-
 /*****  Someone else defines these  *************************************/
 #elif defined(STATUS_LED_PAR)
 
@@ -122,19 +65,6 @@ void status_led_set  (int led, int state);
    * filling this file up with lots of custom board stuff.
    */
 
-/*****  CMI   ********************************************************/
-#elif defined(CONFIG_CMI)
-# define STATUS_LED_DIR                im_mios.mios_mpiosm32ddr
-# define STATUS_LED_DAT                im_mios.mios_mpiosm32dr
-
-# define STATUS_LED_BIT                0x2000          /* Select one of the 16 possible*/
-                                               /* MIOS outputs */
-# define STATUS_LED_PERIOD     (CONFIG_SYS_HZ / 2)     /* Blinking periode is 500 ms */
-# define STATUS_LED_STATE      STATUS_LED_BLINKING
-
-# define STATUS_LED_ACTIVE     1               /* LED on for bit == 0  */
-# define STATUS_LED_BOOT       0               /* LED 0 used for boot status */
-
 #elif defined(CONFIG_V38B)
 
 # define STATUS_LED_BIT                0x0010                  /* Timer7 GPIO */
@@ -163,6 +93,7 @@ typedef unsigned long led_id_t;
 extern void __led_toggle (led_id_t mask);
 extern void __led_init (led_id_t mask, int state);
 extern void __led_set (led_id_t mask, int state);
+void __led_blink(led_id_t mask, int freq);
 #else
 # error Status LED configuration missing
 #endif