Appropriate toolchain are necessary to generate include/autoconf.mk
for all the architectures supported by U-Boot. Most of them are available
-at the kernel.org site, some are not provided by kernel.org.
-
-The default per-arch CROSS_COMPILE used by this tool is specified by
-the list below, CROSS_COMPILE. You may wish to update the list to
-use your own. Instead of modifying the list directly, you can give
-them via environments.
+at the kernel.org site, some are not provided by kernel.org. This tool uses
+the same tools as buildman, so see that tool for setup (e.g. --fetch-arch).
Tips and trips
./tools/moveconfig.py -Cy CONFIG_CMD_FPGAD -d -
+Finding implied CONFIGs
+-----------------------
+
+Some CONFIG options can be implied by others and this can help to reduce
+the size of the defconfig files. For example, CONFIG_X86 implies
+CONFIG_CMD_IRQ, so we can put 'imply CMD_IRQ' under 'config X86' and
+all x86 boards will have that option, avoiding adding CONFIG_CMD_IRQ to
+each of the x86 defconfig files.
+
+This tool can help find such configs. To use it, first build a database:
+
+ ./tools/moveconfig.py -b
+
+Then try to query it:
+
+ ./tools/moveconfig.py -i CONFIG_CMD_IRQ
+ CONFIG_CMD_IRQ found in 311/2384 defconfigs
+ 44 : CONFIG_SYS_FSL_ERRATUM_IFC_A002769
+ 41 : CONFIG_SYS_FSL_ERRATUM_A007075
+ 31 : CONFIG_SYS_FSL_DDR_VER_44
+ 28 : CONFIG_ARCH_P1010
+ 28 : CONFIG_SYS_FSL_ERRATUM_P1010_A003549
+ 28 : CONFIG_SYS_FSL_ERRATUM_SEC_A003571
+ 28 : CONFIG_SYS_FSL_ERRATUM_IFC_A003399
+ 25 : CONFIG_SYS_FSL_ERRATUM_A008044
+ 22 : CONFIG_ARCH_P1020
+ 21 : CONFIG_SYS_FSL_DDR_VER_46
+ 20 : CONFIG_MAX_PIRQ_LINKS
+ 20 : CONFIG_HPET_ADDRESS
+ 20 : CONFIG_X86
+ 20 : CONFIG_PCIE_ECAM_SIZE
+ 20 : CONFIG_IRQ_SLOT_COUNT
+ 20 : CONFIG_I8259_PIC
+ 20 : CONFIG_CPU_ADDR_BITS
+ 20 : CONFIG_RAMBASE
+ 20 : CONFIG_SYS_FSL_ERRATUM_A005871
+ 20 : CONFIG_PCIE_ECAM_BASE
+ 20 : CONFIG_X86_TSC_TIMER
+ 20 : CONFIG_I8254_TIMER
+ 20 : CONFIG_CMD_GETTIME
+ 19 : CONFIG_SYS_FSL_ERRATUM_A005812
+ 18 : CONFIG_X86_RUN_32BIT
+ 17 : CONFIG_CMD_CHIP_CONFIG
+ ...
+
+This shows a list of config options which might imply CONFIG_CMD_EEPROM along
+with how many defconfigs they cover. From this you can see that CONFIG_X86
+implies CONFIG_CMD_EEPROM. Therefore, instead of adding CONFIG_CMD_EEPROM to
+the defconfig of every x86 board, you could add a single imply line to the
+Kconfig file:
+
+ config X86
+ bool "x86 architecture"
+ ...
+ imply CMD_EEPROM
+
+That will cover 20 defconfigs. Many of the options listed are not suitable as
+they are not related. E.g. it would be odd for CONFIG_CMD_GETTIME to imply
+CMD_EEPROM.
+
+Using this search you can reduce the size of moveconfig patches.
+
+You can automatically add 'imply' statements in the Kconfig with the -a
+option:
+
+ ./tools/moveconfig.py -s -i CONFIG_SCSI \
+ -a CONFIG_ARCH_LS1021A,CONFIG_ARCH_LS1043A
+
+This will add 'imply SCSI' to the two CONFIG options mentioned, assuming that
+the database indicates that they do actually imply CONFIG_SCSI and do not
+already have an 'imply SCSI'.
+
+The output shows where the imply is added:
+
+ 18 : CONFIG_ARCH_LS1021A arch/arm/cpu/armv7/ls102xa/Kconfig:1
+ 13 : CONFIG_ARCH_LS1043A arch/arm/cpu/armv8/fsl-layerscape/Kconfig:11
+ 12 : CONFIG_ARCH_LS1046A arch/arm/cpu/armv8/fsl-layerscape/Kconfig:31
+
+The first number is the number of boards which can avoid having a special
+CONFIG_SCSI option in their defconfig file if this 'imply' is added.
+The location at the right is the Kconfig file and line number where the config
+appears. For example, adding 'imply CONFIG_SCSI' to the 'config ARCH_LS1021A'
+in arch/arm/cpu/armv7/ls102xa/Kconfig at line 1 will help 18 boards to reduce
+the size of their defconfig files.
+
+If you want to add an 'imply' to every imply config in the list, you can use
+
+ ./tools/moveconfig.py -s -i CONFIG_SCSI -a all
+
+To control which ones are displayed, use -I <list> where list is a list of
+options (use '-I help' to see possible options and their meaning).
+
+To skip showing you options that already have an 'imply' attached, use -A.
+
+When you have finished adding 'imply' options you can regenerate the
+defconfig files for affected boards with something like:
+
+ git show --stat | ./tools/moveconfig.py -s -d -
+
+This will regenerate only those defconfigs changed in the current commit.
+If you start with (say) 100 defconfigs being changed in the commit, and add
+a few 'imply' options as above, then regenerate, hopefully you can reduce the
+number of defconfigs changed in the commit.
+
+
Available options
-----------------
"""
+import collections
import copy
import difflib
import filecmp
import threading
import time
+sys.path.append(os.path.join(os.path.dirname(__file__), 'buildman'))
+sys.path.append(os.path.join(os.path.dirname(__file__), 'patman'))
+import bsettings
+import kconfiglib
+import toolchain
+
SHOW_GNU_MAKE = 'scripts/show-gnu-make'
SLEEP_TIME=0.03
-# Here is the list of cross-tools I use.
-# Most of them are available at kernel.org
-# (https://www.kernel.org/pub/tools/crosstool/files/bin/), except the following:
-# arc: https://github.com/foss-for-synopsys-dwc-arc-processors/toolchain/releases
-# nds32: http://osdk.andestech.com/packages/nds32le-linux-glibc-v1.tgz
-# nios2: https://sourcery.mentor.com/GNUToolchain/subscription42545
-# sh: http://sourcery.mentor.com/public/gnu_toolchain/sh-linux-gnu
-CROSS_COMPILE = {
- 'arc': 'arc-linux-',
- 'aarch64': 'aarch64-linux-',
- 'arm': 'arm-unknown-linux-gnueabi-',
- 'm68k': 'm68k-linux-',
- 'microblaze': 'microblaze-linux-',
- 'mips': 'mips-linux-',
- 'nds32': 'nds32le-linux-',
- 'nios2': 'nios2-linux-gnu-',
- 'powerpc': 'powerpc-linux-',
- 'sh': 'sh-linux-gnu-',
- 'x86': 'i386-linux-',
- 'xtensa': 'xtensa-linux-'
-}
-
STATE_IDLE = 0
STATE_DEFCONFIG = 1
STATE_AUTOCONF = 2
AUTO_CONF_PATH = 'include/config/auto.conf'
CONFIG_DATABASE = 'moveconfig.db'
+CONFIG_LEN = len('CONFIG_')
### helper functions ###
def get_devnull():
line = line.strip()
if not line:
continue # skip blank lines silently
+ if ' ' in line:
+ line = line.split(' ')[0] # handle 'git log' input
matched = get_matched_defconfig(line)
if not matched:
print >> sys.stderr, "warning: %s:%d: no defconfig matched '%s'" % \
else:
print line,
-def update_cross_compile(color_enabled):
- """Update per-arch CROSS_COMPILE via environment variables
-
- The default CROSS_COMPILE values are available
- in the CROSS_COMPILE list above.
-
- You can override them via environment variables
- CROSS_COMPILE_{ARCH}.
-
- For example, if you want to override toolchain prefixes
- for ARM and PowerPC, you can do as follows in your shell:
-
- export CROSS_COMPILE_ARM=...
- export CROSS_COMPILE_POWERPC=...
-
- Then, this function checks if specified compilers really exist in your
- PATH environment.
- """
- archs = []
-
- for arch in os.listdir('arch'):
- if os.path.exists(os.path.join('arch', arch, 'Makefile')):
- archs.append(arch)
-
- # arm64 is a special case
- archs.append('aarch64')
-
- for arch in archs:
- env = 'CROSS_COMPILE_' + arch.upper()
- cross_compile = os.environ.get(env)
- if not cross_compile:
- cross_compile = CROSS_COMPILE.get(arch, '')
-
- for path in os.environ["PATH"].split(os.pathsep):
- gcc_path = os.path.join(path, cross_compile + 'gcc')
- if os.path.isfile(gcc_path) and os.access(gcc_path, os.X_OK):
- break
- else:
- print >> sys.stderr, color_text(color_enabled, COLOR_YELLOW,
- 'warning: %sgcc: not found in PATH. %s architecture boards will be skipped'
- % (cross_compile, arch))
- cross_compile = None
-
- CROSS_COMPILE[arch] = cross_compile
-
def extend_matched_lines(lines, matched, pre_patterns, post_patterns, extend_pre,
extend_post):
"""Extend matched lines if desired patterns are found before/after already
print ' %d defconfigs out of %d\r' % (self.current, self.total),
sys.stdout.flush()
+
+class KconfigScanner:
+ """Kconfig scanner."""
+
+ def __init__(self):
+ """Scan all the Kconfig files and create a Config object."""
+ # Define environment variables referenced from Kconfig
+ os.environ['srctree'] = os.getcwd()
+ os.environ['UBOOTVERSION'] = 'dummy'
+ os.environ['KCONFIG_OBJDIR'] = ''
+ self.conf = kconfiglib.Config()
+
+
class KconfigParser:
"""A parser of .config and include/autoconf.mk."""
self.config_autoconf = os.path.join(build_dir, AUTO_CONF_PATH)
self.defconfig = os.path.join(build_dir, 'defconfig')
- def get_cross_compile(self):
- """Parse .config file and return CROSS_COMPILE.
+ def get_arch(self):
+ """Parse .config file and return the architecture.
Returns:
- A string storing the compiler prefix for the architecture.
- Return a NULL string for architectures that do not require
- compiler prefix (Sandbox and native build is the case).
- Return None if the specified compiler is missing in your PATH.
- Caller should distinguish '' and None.
+ Architecture name (e.g. 'arm').
"""
arch = ''
cpu = ''
if arch == 'arm' and cpu == 'armv8':
arch = 'aarch64'
- return CROSS_COMPILE.get(arch, None)
+ return arch
def parse_one_config(self, config, dotconfig_lines, autoconf_lines):
"""Parse .config, defconfig, include/autoconf.mk for one config.
for faster processing.
"""
- def __init__(self, configs, options, progress, devnull, make_cmd,
- reference_src_dir, db_queue):
+ def __init__(self, toolchains, configs, options, progress, devnull,
+ make_cmd, reference_src_dir, db_queue):
"""Create a new process slot.
Arguments:
+ toolchains: Toolchains object containing toolchains.
configs: A list of CONFIGs to move.
options: option flags.
progress: A progress indicator.
source tree.
db_queue: output queue to write config info for the database
"""
+ self.toolchains = toolchains
self.options = options
self.progress = progress
self.build_dir = tempfile.mkdtemp()
def do_autoconf(self):
"""Run 'make AUTO_CONF_PATH'."""
- self.cross_compile = self.parser.get_cross_compile()
- if self.cross_compile is None:
+ arch = self.parser.get_arch()
+ try:
+ toolchain = self.toolchains.Select(arch)
+ except ValueError:
self.log += color_text(self.options.color, COLOR_YELLOW,
- "Compiler is missing. Do nothing.\n")
+ "Tool chain for '%s' is missing. Do nothing.\n" % arch)
self.finish(False)
return
+ env = toolchain.MakeEnvironment(False)
cmd = list(self.make_cmd)
- if self.cross_compile:
- cmd.append('CROSS_COMPILE=%s' % self.cross_compile)
cmd.append('KCONFIG_IGNORE_DUPLICATES=1')
cmd.append(AUTO_CONF_PATH)
- self.ps = subprocess.Popen(cmd, stdout=self.devnull,
+ self.ps = subprocess.Popen(cmd, stdout=self.devnull, env=env,
stderr=subprocess.PIPE,
cwd=self.current_src_dir)
self.state = STATE_AUTOCONF
"""Controller of the array of subprocess slots."""
- def __init__(self, configs, options, progress, reference_src_dir, db_queue):
+ def __init__(self, toolchains, configs, options, progress,
+ reference_src_dir, db_queue):
"""Create a new slots controller.
Arguments:
+ toolchains: Toolchains object containing toolchains.
configs: A list of CONFIGs to move.
options: option flags.
progress: A progress indicator.
devnull = get_devnull()
make_cmd = get_make_cmd()
for i in range(options.jobs):
- self.slots.append(Slot(configs, options, progress, devnull,
- make_cmd, reference_src_dir, db_queue))
+ self.slots.append(Slot(toolchains, configs, options, progress,
+ devnull, make_cmd, reference_src_dir,
+ db_queue))
def add(self, defconfig):
"""Add a new subprocess if a vacant slot is found.
return self.src_dir
-def move_config(configs, options, db_queue):
+def move_config(toolchains, configs, options, db_queue):
"""Move config options to defconfig files.
Arguments:
defconfigs = get_all_defconfigs()
progress = Progress(len(defconfigs))
- slots = Slots(configs, options, progress, reference_src_dir, db_queue)
+ slots = Slots(toolchains, configs, options, progress, reference_src_dir,
+ db_queue)
# Main loop to process defconfig files:
# Add a new subprocess into a vacant slot.
slots.show_failed_boards()
slots.show_suspicious_boards()
+def find_kconfig_rules(kconf, config, imply_config):
+ """Check whether a config has a 'select' or 'imply' keyword
+
+ Args:
+ kconf: Kconfig.Config object
+ config: Name of config to check (without CONFIG_ prefix)
+ imply_config: Implying config (without CONFIG_ prefix) which may or
+ may not have an 'imply' for 'config')
+
+ Returns:
+ Symbol object for 'config' if found, else None
+ """
+ sym = kconf.get_symbol(imply_config)
+ if sym:
+ for sel in sym.get_selected_symbols() | sym.get_implied_symbols():
+ if sel.get_name() == config:
+ return sym
+ return None
+
+def check_imply_rule(kconf, config, imply_config):
+ """Check if we can add an 'imply' option
+
+ This finds imply_config in the Kconfig and looks to see if it is possible
+ to add an 'imply' for 'config' to that part of the Kconfig.
+
+ Args:
+ kconf: Kconfig.Config object
+ config: Name of config to check (without CONFIG_ prefix)
+ imply_config: Implying config (without CONFIG_ prefix) which may or
+ may not have an 'imply' for 'config')
+
+ Returns:
+ tuple:
+ filename of Kconfig file containing imply_config, or None if none
+ line number within the Kconfig file, or 0 if none
+ message indicating the result
+ """
+ sym = kconf.get_symbol(imply_config)
+ if not sym:
+ return 'cannot find sym'
+ locs = sym.get_def_locations()
+ if len(locs) != 1:
+ return '%d locations' % len(locs)
+ fname, linenum = locs[0]
+ cwd = os.getcwd()
+ if cwd and fname.startswith(cwd):
+ fname = fname[len(cwd) + 1:]
+ file_line = ' at %s:%d' % (fname, linenum)
+ with open(fname) as fd:
+ data = fd.read().splitlines()
+ if data[linenum - 1] != 'config %s' % imply_config:
+ return None, 0, 'bad sym format %s%s' % (data[linenum], file_line)
+ return fname, linenum, 'adding%s' % file_line
+
+def add_imply_rule(config, fname, linenum):
+ """Add a new 'imply' option to a Kconfig
+
+ Args:
+ config: config option to add an imply for (without CONFIG_ prefix)
+ fname: Kconfig filename to update
+ linenum: Line number to place the 'imply' before
+
+ Returns:
+ Message indicating the result
+ """
+ file_line = ' at %s:%d' % (fname, linenum)
+ data = open(fname).read().splitlines()
+ linenum -= 1
+
+ for offset, line in enumerate(data[linenum:]):
+ if line.strip().startswith('help') or not line:
+ data.insert(linenum + offset, '\timply %s' % config)
+ with open(fname, 'w') as fd:
+ fd.write('\n'.join(data) + '\n')
+ return 'added%s' % file_line
+
+ return 'could not insert%s'
+
+(IMPLY_MIN_2, IMPLY_TARGET, IMPLY_CMD, IMPLY_NON_ARCH_BOARD) = (
+ 1, 2, 4, 8)
+
+IMPLY_FLAGS = {
+ 'min2': [IMPLY_MIN_2, 'Show options which imply >2 boards (normally >5)'],
+ 'target': [IMPLY_TARGET, 'Allow CONFIG_TARGET_... options to imply'],
+ 'cmd': [IMPLY_CMD, 'Allow CONFIG_CMD_... to imply'],
+ 'non-arch-board': [
+ IMPLY_NON_ARCH_BOARD,
+ 'Allow Kconfig options outside arch/ and /board/ to imply'],
+};
+
+def do_imply_config(config_list, add_imply, imply_flags, skip_added,
+ check_kconfig=True, find_superset=False):
+ """Find CONFIG options which imply those in the list
+
+ Some CONFIG options can be implied by others and this can help to reduce
+ the size of the defconfig files. For example, CONFIG_X86 implies
+ CONFIG_CMD_IRQ, so we can put 'imply CMD_IRQ' under 'config X86' and
+ all x86 boards will have that option, avoiding adding CONFIG_CMD_IRQ to
+ each of the x86 defconfig files.
+
+ This function uses the moveconfig database to find such options. It
+ displays a list of things that could possibly imply those in the list.
+ The algorithm ignores any that start with CONFIG_TARGET since these
+ typically refer to only a few defconfigs (often one). It also does not
+ display a config with less than 5 defconfigs.
+
+ The algorithm works using sets. For each target config in config_list:
+ - Get the set 'defconfigs' which use that target config
+ - For each config (from a list of all configs):
+ - Get the set 'imply_defconfig' of defconfigs which use that config
+ -
+ - If imply_defconfigs contains anything not in defconfigs then
+ this config does not imply the target config
+
+ Params:
+ config_list: List of CONFIG options to check (each a string)
+ add_imply: Automatically add an 'imply' for each config.
+ imply_flags: Flags which control which implying configs are allowed
+ (IMPLY_...)
+ skip_added: Don't show options which already have an imply added.
+ check_kconfig: Check if implied symbols already have an 'imply' or
+ 'select' for the target config, and show this information if so.
+ find_superset: True to look for configs which are a superset of those
+ already found. So for example if CONFIG_EXYNOS5 implies an option,
+ but CONFIG_EXYNOS covers a larger set of defconfigs and also
+ implies that option, this will drop the former in favour of the
+ latter. In practice this option has not proved very used.
+
+ Note the terminoloy:
+ config - a CONFIG_XXX options (a string, e.g. 'CONFIG_CMD_EEPROM')
+ defconfig - a defconfig file (a string, e.g. 'configs/snow_defconfig')
+ """
+ kconf = KconfigScanner().conf if check_kconfig else None
+ if add_imply and add_imply != 'all':
+ add_imply = add_imply.split()
+
+ # key is defconfig name, value is dict of (CONFIG_xxx, value)
+ config_db = {}
+
+ # Holds a dict containing the set of defconfigs that contain each config
+ # key is config, value is set of defconfigs using that config
+ defconfig_db = collections.defaultdict(set)
+
+ # Set of all config options we have seen
+ all_configs = set()
+
+ # Set of all defconfigs we have seen
+ all_defconfigs = set()
+
+ # Read in the database
+ configs = {}
+ with open(CONFIG_DATABASE) as fd:
+ for line in fd.readlines():
+ line = line.rstrip()
+ if not line: # Separator between defconfigs
+ config_db[defconfig] = configs
+ all_defconfigs.add(defconfig)
+ configs = {}
+ elif line[0] == ' ': # CONFIG line
+ config, value = line.strip().split('=', 1)
+ configs[config] = value
+ defconfig_db[config].add(defconfig)
+ all_configs.add(config)
+ else: # New defconfig
+ defconfig = line
+
+ # Work through each target config option in tern, independently
+ for config in config_list:
+ defconfigs = defconfig_db.get(config)
+ if not defconfigs:
+ print '%s not found in any defconfig' % config
+ continue
+
+ # Get the set of defconfigs without this one (since a config cannot
+ # imply itself)
+ non_defconfigs = all_defconfigs - defconfigs
+ num_defconfigs = len(defconfigs)
+ print '%s found in %d/%d defconfigs' % (config, num_defconfigs,
+ len(all_configs))
+
+ # This will hold the results: key=config, value=defconfigs containing it
+ imply_configs = {}
+ rest_configs = all_configs - set([config])
+
+ # Look at every possible config, except the target one
+ for imply_config in rest_configs:
+ if 'ERRATUM' in imply_config:
+ continue
+ if not (imply_flags & IMPLY_CMD):
+ if 'CONFIG_CMD' in imply_config:
+ continue
+ if not (imply_flags & IMPLY_TARGET):
+ if 'CONFIG_TARGET' in imply_config:
+ continue
+
+ # Find set of defconfigs that have this config
+ imply_defconfig = defconfig_db[imply_config]
+
+ # Get the intersection of this with defconfigs containing the
+ # target config
+ common_defconfigs = imply_defconfig & defconfigs
+
+ # Get the set of defconfigs containing this config which DO NOT
+ # also contain the taret config. If this set is non-empty it means
+ # that this config affects other defconfigs as well as (possibly)
+ # the ones affected by the target config. This means it implies
+ # things we don't want to imply.
+ not_common_defconfigs = imply_defconfig & non_defconfigs
+ if not_common_defconfigs:
+ continue
+
+ # If there are common defconfigs, imply_config may be useful
+ if common_defconfigs:
+ skip = False
+ if find_superset:
+ for prev in imply_configs.keys():
+ prev_count = len(imply_configs[prev])
+ count = len(common_defconfigs)
+ if (prev_count > count and
+ (imply_configs[prev] & common_defconfigs ==
+ common_defconfigs)):
+ # skip imply_config because prev is a superset
+ skip = True
+ break
+ elif count > prev_count:
+ # delete prev because imply_config is a superset
+ del imply_configs[prev]
+ if not skip:
+ imply_configs[imply_config] = common_defconfigs
+
+ # Now we have a dict imply_configs of configs which imply each config
+ # The value of each dict item is the set of defconfigs containing that
+ # config. Rank them so that we print the configs that imply the largest
+ # number of defconfigs first.
+ ranked_iconfigs = sorted(imply_configs,
+ key=lambda k: len(imply_configs[k]), reverse=True)
+ kconfig_info = ''
+ cwd = os.getcwd()
+ add_list = collections.defaultdict(list)
+ for iconfig in ranked_iconfigs:
+ num_common = len(imply_configs[iconfig])
+
+ # Don't bother if there are less than 5 defconfigs affected.
+ if num_common < (2 if imply_flags & IMPLY_MIN_2 else 5):
+ continue
+ missing = defconfigs - imply_configs[iconfig]
+ missing_str = ', '.join(missing) if missing else 'all'
+ missing_str = ''
+ show = True
+ if kconf:
+ sym = find_kconfig_rules(kconf, config[CONFIG_LEN:],
+ iconfig[CONFIG_LEN:])
+ kconfig_info = ''
+ if sym:
+ locs = sym.get_def_locations()
+ if len(locs) == 1:
+ fname, linenum = locs[0]
+ if cwd and fname.startswith(cwd):
+ fname = fname[len(cwd) + 1:]
+ kconfig_info = '%s:%d' % (fname, linenum)
+ if skip_added:
+ show = False
+ else:
+ sym = kconf.get_symbol(iconfig[CONFIG_LEN:])
+ fname = ''
+ if sym:
+ locs = sym.get_def_locations()
+ if len(locs) == 1:
+ fname, linenum = locs[0]
+ if cwd and fname.startswith(cwd):
+ fname = fname[len(cwd) + 1:]
+ in_arch_board = not sym or (fname.startswith('arch') or
+ fname.startswith('board'))
+ if (not in_arch_board and
+ not (imply_flags & IMPLY_NON_ARCH_BOARD)):
+ continue
+
+ if add_imply and (add_imply == 'all' or
+ iconfig in add_imply):
+ fname, linenum, kconfig_info = (check_imply_rule(kconf,
+ config[CONFIG_LEN:], iconfig[CONFIG_LEN:]))
+ if fname:
+ add_list[fname].append(linenum)
+
+ if show and kconfig_info != 'skip':
+ print '%5d : %-30s%-25s %s' % (num_common, iconfig.ljust(30),
+ kconfig_info, missing_str)
+
+ # Having collected a list of things to add, now we add them. We process
+ # each file from the largest line number to the smallest so that
+ # earlier additions do not affect our line numbers. E.g. if we added an
+ # imply at line 20 it would change the position of each line after
+ # that.
+ for fname, linenums in add_list.iteritems():
+ for linenum in sorted(linenums, reverse=True):
+ add_imply_rule(config[CONFIG_LEN:], fname, linenum)
+
+
def main():
try:
cpu_count = multiprocessing.cpu_count()
parser = optparse.OptionParser()
# Add options here
+ parser.add_option('-a', '--add-imply', type='string', default='',
+ help='comma-separated list of CONFIG options to add '
+ "an 'imply' statement to for the CONFIG in -i")
+ parser.add_option('-A', '--skip-added', action='store_true', default=False,
+ help="don't show options which are already marked as "
+ 'implying others')
parser.add_option('-b', '--build-db', action='store_true', default=False,
help='build a CONFIG database')
parser.add_option('-c', '--color', action='store_true', default=False,
help='a file containing a list of defconfigs to move, '
"one per line (for example 'snow_defconfig') "
"or '-' to read from stdin")
+ parser.add_option('-i', '--imply', action='store_true', default=False,
+ help='find options which imply others')
+ parser.add_option('-I', '--imply-flags', type='string', default='',
+ help="control the -i option ('help' for help")
parser.add_option('-n', '--dry-run', action='store_true', default=False,
help='perform a trial run (show log with no changes)')
parser.add_option('-e', '--exit-on-error', action='store_true',
(options, configs) = parser.parse_args()
- if len(configs) == 0 and not any((options.force_sync, options.build_db)):
+ if len(configs) == 0 and not any((options.force_sync, options.build_db,
+ options.imply)):
parser.print_usage()
sys.exit(1)
check_top_directory()
+ if options.imply:
+ imply_flags = 0
+ if options.imply_flags == 'all':
+ imply_flags = -1
+
+ elif options.imply_flags:
+ for flag in options.imply_flags.split(','):
+ bad = flag not in IMPLY_FLAGS
+ if bad:
+ print "Invalid flag '%s'" % flag
+ if flag == 'help' or bad:
+ print "Imply flags: (separate with ',')"
+ for name, info in IMPLY_FLAGS.iteritems():
+ print ' %-15s: %s' % (name, info[1])
+ parser.print_usage()
+ sys.exit(1)
+ imply_flags |= IMPLY_FLAGS[flag][0]
+
+ do_imply_config(configs, options.add_imply, imply_flags,
+ options.skip_added)
+ return
+
config_db = {}
db_queue = Queue.Queue()
t = DatabaseThread(config_db, db_queue)
if not options.cleanup_headers_only:
check_clean_directory()
- update_cross_compile(options.color)
- move_config(configs, options, db_queue)
+ bsettings.Setup('')
+ toolchains = toolchain.Toolchains()
+ toolchains.GetSettings()
+ toolchains.Scan(verbose=False)
+ move_config(toolchains, configs, options, db_queue)
db_queue.join()
if configs:
if options.build_db:
with open(CONFIG_DATABASE, 'w') as fd:
for defconfig, configs in config_db.iteritems():
- print >>fd, '%s' % defconfig
+ fd.write('%s\n' % defconfig)
for config in sorted(configs.keys()):
- print >>fd, ' %s=%s' % (config, configs[config])
- print >>fd
+ fd.write(' %s=%s\n' % (config, configs[config]))
+ fd.write('\n')
if __name__ == '__main__':
main()
projects / people / ms / u-boot.git / blobdiff