X-Git-Url: http://git.ipfire.org/?p=people%2Fms%2Fu-boot.git;a=blobdiff_plain;f=Kconfig;h=a9a4938401d6daefcb622dce2d4334c041880cec;hp=15e15af5b3c59510614b9e6cef03bdd1968a49ed;hb=73223f0e1bd0e37925ae1b7f21b51733145571dc;hpb=563e53efaadd76def21612bcf9f0236d870b6e68 diff --git a/Kconfig b/Kconfig index 15e15af5b3..a9a4938401 100644 --- a/Kconfig +++ b/Kconfig @@ -114,6 +114,16 @@ config SPL help If you want to build SPL as well as the normal image, say Y. +config SPL_SYS_MALLOC_SIMPLE + bool + depends on SPL + prompt "Only use malloc_simple functions in the spl" + help + Say Y here to only use the *_simple malloc functions from + malloc_simple.c, rather then using the versions from dlmalloc.c + this will make the SPL binary smaller at the cost of more heap + usage as the *_simple malloc functions do not re-use free-ed mem. + config SPL_STACK_R depends on SPL bool "Enable SDRAM location for SPL stack" @@ -132,6 +142,26 @@ config SPL_STACK_R_ADDR Specify the address in SDRAM for the SPL stack. This will be set up before board_init_r() is called. +config SPL_STACK_R_MALLOC_SIMPLE_LEN + depends on SPL_STACK_R && SPL_SYS_MALLOC_SIMPLE + hex "Size of malloc_simple heap after switching to DRAM SPL stack" + default 0x100000 + help + Specify the amount of the stack to use as memory pool for + malloc_simple after switching the stack to DRAM. This may be set + to give board_init_r() a larger heap then the initial heap in + SRAM which is limited to SYS_MALLOC_F_LEN bytes. + +config SPL_SEPARATE_BSS + depends on SPL + bool "BSS section is in a different memory region from text" + help + Some platforms need a large BSS region in SPL and can provide this + because RAM is already set up. In this case BSS can be moved to RAM. + This option should then be enabled so that the correct device tree + location is used. Normally we put the device tree at the end of BSS + but with this option enabled, it goes at _image_binary_end. + config TPL bool depends on SPL && SUPPORT_TPL @@ -146,7 +176,11 @@ config FIT Flattened Image Tree. FIT is formally a FDT, which can include images of various types (kernel, FDT blob, ramdisk, etc.) in a single blob. To boot this new uImage structure, - pass the the address of the blob to the "bootm" command. + pass the address of the blob to the "bootm" command. + FIT is very flexible, supporting compression, multiple images, + multiple configurations, verification through hashing and also + verified boot (secure boot using RSA). This option enables that + feature. config FIT_VERBOSE bool "Display verbose messages on FIT boot" @@ -161,8 +195,62 @@ config FIT_SIGNATURE This option enables signature verification of FIT uImages, using a hash signed and verified using RSA. If CONFIG_SHA_PROG_HW_ACCEL is defined, i.e support for progressive - hashing is available using hardware, RSA library will use it. - See doc/uImage.FIT/signature.txt for more details. + hashing is available using hardware, then then RSA library will use + it. See doc/uImage.FIT/signature.txt for more details. + + WARNING: When relying on signed FIT images with a required signature + check the legacy image format is disabled by default, so that + unsigned images cannot be loaded. If a board needs the legacy image + format support in this case, enable it using + CONFIG_IMAGE_FORMAT_LEGACY. + +config FIT_BEST_MATCH + bool "Select the best match for the kernel device tree" + depends on FIT + help + When no configuration is explicitly selected, default to the + one whose fdt's compatibility field best matches that of + U-Boot itself. A match is considered "best" if it matches the + most specific compatibility entry of U-Boot's fdt's root node. + The order of entries in the configuration's fdt is ignored. + +config FIT_VERBOSE + bool "Show verbose messages when FIT images fails" + depends on FIT + help + Generally a system will have valid FIT images so debug messages + are a waste of code space. If you are debugging your images then + you can enable this option to get more verbose information about + failures. + +config OF_BOARD_SETUP + bool "Set up board-specific details in device tree before boot" + depends on OF_LIBFDT + help + This causes U-Boot to call ft_board_setup() before booting into + the Operating System. This function can set up various + board-specific information in the device tree for use by the OS. + The device tree is then passed to the OS. + +config OF_SYSTEM_SETUP + bool "Set up system-specific details in device tree before boot" + depends on OF_LIBFDT + help + This causes U-Boot to call ft_system_setup() before booting into + the Operating System. This function can set up various + system-specific information in the device tree for use by the OS. + The device tree is then passed to the OS. + +config OF_STDOUT_VIA_ALIAS + bool "Update the device-tree stdout alias from U-Boot" + depends on OF_LIBFDT + help + This uses U-Boot's serial alias from the aliases node to update + the device tree passed to the OS. The "linux,stdout-path" property + in the chosen node is set to point to the correct serial node. + This option currently references CONFIG_CONS_INDEX, which is + incorrect when used with device tree as this option does not + exist / should not be used. config SYS_EXTRA_OPTIONS string "Extra Options (DEPRECATED)" @@ -178,7 +266,9 @@ config SYS_EXTRA_OPTIONS new boards should not use this option. config SYS_TEXT_BASE - depends on SPARC || ARC || X86 || ARCH_UNIPHIER + depends on SPARC || ARC || X86 || ARCH_UNIPHIER || ARCH_ZYNQMP || \ + (M68K && !TARGET_ASTRO_MCF5373L) || MICROBLAZE + depends on !EFI_APP hex "Text Base" help TODO: Move CONFIG_SYS_TEXT_BASE for all the architecture @@ -193,6 +283,8 @@ endmenu # Boot images source "common/Kconfig" +source "cmd/Kconfig" + source "dts/Kconfig" source "net/Kconfig"