X-Git-Url: http://git.ipfire.org/?p=people%2Fms%2Fu-boot.git;a=blobdiff_plain;f=arch%2Farm%2FKconfig;h=ad2f29165c6cbdff2d42248073b4884969ad7783;hp=a17ba2c60a54c55af61367ffe3409f70bf5e0712;hb=d56b4b19744c314c26dc77585a7c7a9253d1487d;hpb=4125bbcef6a998ce8580a1f5c53c8c93a56a125b diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index a17ba2c60a..ad2f29165c 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -19,6 +19,15 @@ config HAS_VBAR config HAS_THUMB2 bool +# Used for compatibility with asm files copied from the kernel +config ARM_ASM_UNIFIED + bool + default y + +# Used for compatibility with asm files copied from the kernel +config THUMB2_KERNEL + bool + # If set, the workarounds for these ARM errata are applied early during U-Boot # startup. Note that in general these options force the workarounds to be # applied; no CPU-type/version detection exists, unlike the similar options in @@ -128,6 +137,7 @@ config CPU_V7 config CPU_V7M bool select HAS_THUMB2 + select THUMB2_KERNEL select SYS_CACHE_SHIFT_5 config CPU_PXA @@ -243,7 +253,7 @@ config USE_ARCH_MEMCPY but may increase the binary size. config SPL_USE_ARCH_MEMCPY - bool "Use an assembly optimized implementation of memcpy" + bool "Use an assembly optimized implementation of memcpy for SPL" default y if USE_ARCH_MEMCPY depends on !ARM64 help @@ -261,7 +271,7 @@ config USE_ARCH_MEMSET but may increase the binary size. config SPL_USE_ARCH_MEMSET - bool "Use an assembly optimized implementation of memset" + bool "Use an assembly optimized implementation of memset for SPL" default y if USE_ARCH_MEMSET depends on !ARM64 help @@ -281,6 +291,7 @@ choice config ARCH_AT91 bool "Atmel AT91" + select SPL_BOARD_INIT if SPL config TARGET_EDB93XX bool "Support edb93xx" @@ -476,6 +487,7 @@ config ARCH_BCM283X select DM_SERIAL select DM_GPIO select OF_CONTROL + imply FAT_WRITE config TARGET_VEXPRESS_CA15_TC2 bool "Support vexpress_ca15_tc2" @@ -494,14 +506,22 @@ config TARGET_VEXPRESS_CA9X4 config TARGET_BCM23550_W1D bool "Support bcm23550_w1d" select CPU_V7 + imply CRC32_VERIFY + imply FAT_WRITE config TARGET_BCM28155_AP bool "Support bcm28155_ap" select CPU_V7 + imply CRC32_VERIFY + imply FAT_WRITE config TARGET_BCMCYGNUS bool "Support bcmcygnus" select CPU_V7 + imply CRC32_VERIFY + imply CMD_HASH + imply FAT_WRITE + imply HASH_VERIFY config TARGET_BCMNSP bool "Support bcmnsp" @@ -524,6 +544,7 @@ config ARCH_EXYNOS select DM_SPI select DM_GPIO select DM_KEYBOARD + imply FAT_WRITE config ARCH_S5PC1XX bool "Samsung S5PC1XX" @@ -548,11 +569,13 @@ config ARCH_KEYSTONE select SUPPORT_SPL select SYS_THUMB_BUILD select CMD_POWEROFF + imply CMD_MTDPARTS imply FIT config ARCH_OMAP2PLUS bool "TI OMAP2+" select CPU_V7 + select SPL_BOARD_INIT if SPL select SUPPORT_SPL imply FIT @@ -595,6 +618,7 @@ config ARCH_RMOBILE select DM select DM_SERIAL select BOARD_EARLY_INIT_F + imply FAT_WRITE imply SYS_THUMB_BUILD config TARGET_S32V234EVB @@ -626,6 +650,9 @@ config ARCH_SOCFPGA select ARCH_MISC_INIT select SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION select SYS_THUMB_BUILD + imply CMD_MTDPARTS + imply CRC32_VERIFY + imply FAT_WRITE config ARCH_SUNXI bool "Support sunxi (Allwinner) SoCs" @@ -641,14 +668,15 @@ config ARCH_SUNXI select OF_BOARD_SETUP select OF_CONTROL select OF_SEPARATE - select SPL_STACK_R if SUPPORT_SPL - select SPL_SYS_MALLOC_SIMPLE if SUPPORT_SPL + select SPL_STACK_R if SPL + select SPL_SYS_MALLOC_SIMPLE if SPL select SYS_NS16550 select SPL_SYS_THUMB_BUILD if !ARM64 select USB if DISTRO_DEFAULTS select USB_STORAGE if DISTRO_DEFAULTS select USB_KEYBOARD if DISTRO_DEFAULTS select USE_TINY_PRINTF + imply FAT_WRITE imply PRE_CONSOLE_BUFFER imply SPL_GPIO_SUPPORT imply SPL_LIBCOMMON_SUPPORT @@ -667,6 +695,7 @@ config ARCH_VF610 bool "Freescale Vybrid" select CPU_V7 select SYS_FSL_ERRATUM_ESDHC111 + imply CMD_MTDPARTS config ARCH_ZYNQ bool "Xilinx Zynq Platform" @@ -674,6 +703,7 @@ config ARCH_ZYNQ select CPU_V7 select SUPPORT_SPL select OF_CONTROL + select SPL_BOARD_INIT if SPL select SPL_OF_CONTROL if SPL select DM select DM_ETH @@ -691,6 +721,7 @@ config ARCH_ZYNQ select SPL_CLK select CLK_ZYNQ imply CMD_CLK + imply FAT_WRITE config ARCH_ZYNQMP bool "Support Xilinx ZynqMP Platform" @@ -701,11 +732,14 @@ config ARCH_ZYNQMP select DM_SERIAL select SUPPORT_SPL select CLK + select SPL_BOARD_INIT if SPL select SPL_CLK select DM_USB if USB + imply FAT_WRITE config TEGRA bool "NVIDIA Tegra" + imply FAT_WRITE config TARGET_VEXPRESS64_AEMV8A bool "Support vexpress_aemv8a" @@ -761,6 +795,7 @@ config TARGET_LS2080AQDS select BOARD_LATE_INIT select SUPPORT_SPL select ARCH_MISC_INIT + imply SCSI help Support for Freescale LS2080AQDS platform The LS2080A Development System (QDS) is a high-performance @@ -775,12 +810,27 @@ config TARGET_LS2080ARDB select BOARD_LATE_INIT select SUPPORT_SPL select ARCH_MISC_INIT + imply SCSI help Support for Freescale LS2080ARDB platform. The LS2080A Reference design board (RDB) is a high-performance development platform that supports the QorIQ LS2080A Layerscape Architecture processor. +config TARGET_LS2081ARDB + bool "Support ls2081ardb" + select ARCH_LS2080A + select ARM64 + select ARMV8_MULTIENTRY + select BOARD_LATE_INIT + select SUPPORT_SPL + select ARCH_MISC_INIT + help + Support for Freescale LS2081ARDB platform. + The LS2081A Reference design board (RDB) is a high-performance + development platform that supports the QorIQ LS2081A/LS2041A + Layerscape Architecture processor. + config TARGET_HIKEY bool "Support HiKey 96boards Consumer Edition Platform" select ARM64 @@ -792,6 +842,19 @@ config TARGET_HIKEY Support for HiKey 96boards platform. It features a HI6220 SoC, with 8xA53 CPU, mali450 gpu, and 1GB RAM. +config TARGET_POPLAR + bool "Support Poplar 96boards Enterprise Edition Platform" + select ARM64 + select DM + select OF_CONTROL + select DM_SERIAL + select DM_USB + help + Support for Poplar 96boards EE platform. It features a HI3798cv200 + SoC, with 4xA53 CPU, 1GB RAM and the high performance Mali T720 GPU + making it capable of running any commercial set-top solution based on + Linux or Android. + config TARGET_LS1012AQDS bool "Support ls1012aqds" select ARCH_LS1012A @@ -808,6 +871,7 @@ config TARGET_LS1012ARDB select ARCH_LS1012A select ARM64 select BOARD_LATE_INIT + imply SCSI help Support for Freescale LS1012ARDB platform. The LS1012A Reference design board (RDB) is a high-performance @@ -836,6 +900,7 @@ config TARGET_LS1021AQDS select LS1_DEEP_SLEEP select SYS_FSL_DDR select BOARD_EARLY_INIT_F + imply SCSI config TARGET_LS1021ATWR bool "Support ls1021atwr" @@ -848,6 +913,7 @@ config TARGET_LS1021ATWR select ARCH_SUPPORT_PSCI select LS1_DEEP_SLEEP select BOARD_EARLY_INIT_F + imply SCSI config TARGET_LS1021AIOT bool "Support ls1021aiot" @@ -858,6 +924,7 @@ config TARGET_LS1021AIOT select SUPPORT_SPL select ARCH_LS1021A select ARCH_SUPPORT_PSCI + imply SCSI help Support for Freescale LS1021AIOT platform. The LS1021A Freescale board (IOT) is a high-performance @@ -872,6 +939,7 @@ config TARGET_LS1043AQDS select BOARD_LATE_INIT select SUPPORT_SPL select BOARD_EARLY_INIT_F + imply SCSI help Support for Freescale LS1043AQDS platform. @@ -883,6 +951,7 @@ config TARGET_LS1043ARDB select BOARD_LATE_INIT select SUPPORT_SPL select BOARD_EARLY_INIT_F + imply SCSI help Support for Freescale LS1043ARDB platform. @@ -895,6 +964,7 @@ config TARGET_LS1046AQDS select SUPPORT_SPL select DM_SPI_FLASH if DM_SPI select BOARD_EARLY_INIT_F + imply SCSI help Support for Freescale LS1046AQDS platform. The LS1046A Development System (QDS) is a high-performance @@ -911,6 +981,7 @@ config TARGET_LS1046ARDB select DM_SPI_FLASH if DM_SPI select POWER_MC34VR500 select BOARD_EARLY_INIT_F + imply SCSI help Support for Freescale LS1046ARDB platform. The LS1046A Reference Design Board (RDB) is a high-performance @@ -943,12 +1014,14 @@ config ARCH_UNIPHIER select OF_CONTROL select OF_LIBFDT select PINCTRL + select SPL_BOARD_INIT if SPL select SPL_DM if SPL select SPL_LIBCOMMON_SUPPORT if SPL select SPL_LIBGENERIC_SUPPORT if SPL select SPL_OF_CONTROL if SPL select SPL_PINCTRL if SPL select SUPPORT_SPL + imply FAT_WRITE help Support for UniPhier SoC family developed by Socionext Inc. (formerly, System LSI Business Division of Panasonic Corporation) @@ -991,6 +1064,7 @@ config ARCH_ROCKCHIP select DM_USB if USB select DM_PWM select DM_REGULATOR + imply FAT_WRITE config TARGET_THUNDERX_88XX bool "Support ThunderX 88xx" @@ -1027,13 +1101,13 @@ source "arch/arm/mach-mvebu/Kconfig" source "arch/arm/cpu/armv7/ls102xa/Kconfig" -source "arch/arm/cpu/armv7/mx7ulp/Kconfig" +source "arch/arm/mach-imx/mx7ulp/Kconfig" -source "arch/arm/cpu/armv7/mx7/Kconfig" +source "arch/arm/mach-imx/mx7/Kconfig" -source "arch/arm/cpu/armv7/mx6/Kconfig" +source "arch/arm/mach-imx/mx6/Kconfig" -source "arch/arm/cpu/armv7/mx5/Kconfig" +source "arch/arm/mach-imx/mx5/Kconfig" source "arch/arm/mach-omap2/Kconfig" @@ -1073,7 +1147,7 @@ source "arch/arm/cpu/armv8/zynqmp/Kconfig" source "arch/arm/cpu/armv8/Kconfig" -source "arch/arm/imx-common/Kconfig" +source "arch/arm/mach-imx/Kconfig" source "board/aries/m28evk/Kconfig" source "board/bosch/shc/Kconfig" @@ -1117,6 +1191,7 @@ source "board/grinn/chiliboard/Kconfig" source "board/gumstix/pepper/Kconfig" source "board/h2200/Kconfig" source "board/hisilicon/hikey/Kconfig" +source "board/hisilicon/poplar/Kconfig" source "board/imx31_phycore/Kconfig" source "board/isee/igep003x/Kconfig" source "board/olimex/mx23_olinuxino/Kconfig"