X-Git-Url: http://git.ipfire.org/?p=people%2Fms%2Fu-boot.git;a=blobdiff_plain;f=include%2Fconfigs%2Fdragonboard410c.h;h=dfeea601a004e33e6fabc44fc373fce6b5ece39c;hp=9b7f43f13491ddbaed822979f0f8613cb97caaad;hb=d021e942107a1f7304a879cec99286ca462f7be3;hpb=f1cc97764be4383d2aeb56d5ba5415439a1d5c97

diff --git a/include/configs/dragonboard410c.h b/include/configs/dragonboard410c.h
index 9b7f43f134..dfeea601a0 100644
--- a/include/configs/dragonboard410c.h
+++ b/include/configs/dragonboard410c.h
@@ -20,13 +20,11 @@
 /* 1008 MB (the last ~30Mb are secured for TrustZone by ATF*/
 #define PHYS_SDRAM_1_SIZE		0x3da00000
 #define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
-#define CONFIG_SYS_TEXT_BASE		0x80080000
 #define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_SDRAM_BASE + 0x7fff0)
 #define CONFIG_SYS_LOAD_ADDR		(CONFIG_SYS_SDRAM_BASE + 0x80000)
-#define CONFIG_SYS_BOOTM_LEN		0x1000000 /* 16MB max kernel size */
+#define CONFIG_SYS_BOOTM_LEN		SZ_64M
 
 /* UART */
-#define CONFIG_BAUDRATE			115200
 
 /* Generic Timer Definitions */
 #define COUNTER_FREQUENCY		19000000
@@ -37,38 +35,18 @@
  * it has to be done after each HCD reset */
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 
-#define CONFIG_USB_HOST_ETHER /* Enable USB Networking */
-
 /* Support all possible USB ethernet dongles */
-#define CONFIG_USB_ETHER_DM9601
-#define CONFIG_USB_ETHER_ASIX
-#define CONFIG_USB_ETHER_ASIX88179
-#define CONFIG_USB_ETHER_MCS7830
-#define CONFIG_USB_ETHER_SMSC95XX
-
-/* Libraries  */
-#define CONFIG_MD5
 
 /* Extra Commands */
-#define CONFIG_CMD_ENV
-#define CONFIG_CMD_MD5SUM
 /* Enable that for switching of boot partitions */
 /* Disabled by default as some sub-commands can brick eMMC */
 /*#define CONFIG_SUPPORT_EMMC_BOOT */
-#define CONFIG_CMD_REGINFO	/* Register dump		*/
-#define CONFIG_CMD_TFTP
-
-/* Partition table support */
-#define HAVE_BLOCK_DEVICE /* Needed for partition commands */
 
 #include <config_distro_defaults.h>
 
 /* BOOTP options */
 #define CONFIG_BOOTP_BOOTFILESIZE
 
-/* Environment - Boot*/
-#define CONFIG_BOOTARGS "console=ttyMSM0,115200n8"
-
 #define BOOT_TARGET_DEVICES(func) \
 	func(USB, usb, 0) \
 	func(MMC, mmc, 1) \
@@ -110,26 +88,21 @@ REFLASH(dragonboard/u-boot.img, 8)\
 	"initrd_high=0xffffffffffffffff\0" \
 	"linux_image=Image\0" \
 	"kernel_addr_r=0x81000000\0"\
-	"fdtfile=apq8016-sbc.dtb\0" \
+	"fdtfile=qcom/apq8016-sbc.dtb\0" \
 	"fdt_addr_r=0x83000000\0"\
 	"ramdisk_addr_r=0x84000000\0"\
 	"scriptaddr=0x90000000\0"\
 	"pxefile_addr_r=0x90100000\0"\
 	BOOTENV
 
-#define CONFIG_ENV_IS_NOWHERE
 #define CONFIG_ENV_SIZE			0x2000
-#define CONFIG_ENV_VARS_UBOOT_CONFIG
-#define CONFIG_SYS_NO_FLASH
+#define CONFIG_SYS_MMC_ENV_DEV		0	/* mmc0 = emmc, mmc1 = sd */
 
 /* Size of malloc() pool */
 #define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + SZ_8M)
 
 /* Monitor Command Prompt */
 #define CONFIG_SYS_CBSIZE		512	/* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
-					sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
 #define CONFIG_SYS_MAXARGS		64	/* max command args */
 
 #endif