X-Git-Url: http://git.ipfire.org/?p=people%2Fms%2Fu-boot.git;a=blobdiff_plain;f=include%2Fconfigs%2Fids8313.h;h=6b6bbbd5c027a4e1e6d9f1cacb75ac6c06fa3c73;hp=8b4278dfd36bb04aef379d4ef2d8f4e558705d8e;hb=c9032ce168c1344fe8ffe8604825ec343ec14adf;hpb=42eccdd650915962345daeae831dab183d67511b

diff --git a/include/configs/ids8313.h b/include/configs/ids8313.h
index 8b4278dfd3..6b6bbbd5c0 100644
--- a/include/configs/ids8313.h
+++ b/include/configs/ids8313.h
@@ -19,19 +19,12 @@
 #define CONFIG_MPC8313
 #define CONFIG_IDS8313
 
-#define CONFIG_SYS_GENERIC_BOARD
-
 #define CONFIG_FSL_ELBC
 
 #define CONFIG_MISC_INIT_R
 
-#define CONFIG_AUTOBOOT_KEYED
-#define CONFIG_AUTOBOOT_PROMPT	\
-	"\nEnter password - autoboot in %d seconds...\n", CONFIG_BOOTDELAY
-#define CONFIG_AUTOBOOT_DELAY_STR	"ids"
 #define CONFIG_BOOT_RETRY_TIME		900
 #define CONFIG_BOOT_RETRY_MIN		30
-#define CONFIG_BOOTDELAY		1
 #define CONFIG_RESET_TO_RETRY
 
 #define CONFIG_83XX_CLKIN		66000000	/* in Hz */
@@ -282,7 +275,6 @@
 /*
  * I2C setup
  */
-#define CONFIG_CMD_I2C
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_FSL
 #define CONFIG_SYS_FSL_I2C_SPEED	400000
@@ -296,7 +288,6 @@
  */
 #ifdef CONFIG_HARD_SPI
 #define CONFIG_MPC8XXX_SPI
-#define CONFIG_CMD_SPI
 #define CONFIG_SYS_GPIO1_PRELIM
 #define CONFIG_SYS_GPIO1_DIR		0x00000001
 #define CONFIG_SYS_GPIO1_DAT		0x00000001
@@ -328,7 +319,6 @@
  * Serial Port
  */
 #define CONFIG_CONS_INDEX		1
-#define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE	1
 
@@ -422,28 +412,14 @@
 /*
  * U-Boot environment setup
  */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_NFS
 #define CONFIG_CMD_NAND
-#define CONFIG_CMD_FLASH
-#define CONFIG_CMD_SNTP
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_DATE
 #define CONFIG_CMDLINE_EDITING
-#define CONFIG_CMD_EDITENV
 #define CONFIG_CMD_JFFS2
 #define CONFIG_BOOTP_SUBNETMASK
 #define CONFIG_BOOTP_GATEWAY
 #define CONFIG_BOOTP_HOSTNAME
 #define CONFIG_BOOTP_BOOTPATH
 #define CONFIG_BOOTP_BOOTFILESIZE
-/* pass open firmware flat tree */
-#define CONFIG_OF_LIBFDT
-#define CONFIG_OF_BOARD_SETUP
-#define CONFIG_OF_STDOUT_VIA_ALIAS
 
 /*
  * The reserved memory
@@ -462,7 +438,6 @@
 #define CONFIG_ENV_ADDR_REDUND	(CONFIG_ENV_ADDR + CONFIG_ENV_SIZE)
 #define CONFIG_ENV_SIZE_REDUND	(CONFIG_ENV_SIZE)
 
-
 #define CONFIG_NETDEV			eth1
 #define CONFIG_HOSTNAME		ids8313
 #define CONFIG_ROOTPATH		"/opt/eldk-4.2/ppc_6xx"
@@ -473,8 +448,6 @@
 #define CONFIG_CMD_ENV_FLAGS
 #define CONFIG_ENV_FLAGS_LIST_STATIC "ethaddr:mo,eth1addr:mo"
 
-#define CONFIG_BAUDRATE		115200
-
 /* Initial Memory map for Linux*/
 #define CONFIG_SYS_BOOTMAPSZ		(256 << 20)
 
@@ -487,8 +460,6 @@
 					 + sizeof(CONFIG_SYS_PROMPT)+16)
 #define CONFIG_SYS_MAXARGS		16
 #define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
-#define CONFIG_SYS_HUSH_PARSER		/* use "hush" command parser	*/
-#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 
 #define CONFIG_SYS_MEMTEST_START	0x00001000
 #define CONFIG_SYS_MEMTEST_END		0x00C00000
@@ -559,7 +530,6 @@
 
 /* UBI Support */
 #define CONFIG_CMD_NAND_TRIMFFS
-#define CONFIG_CMD_UBI
 #define CONFIG_CMD_UBIFS
 #define CONFIG_RBTREE
 #define CONFIG_LZO
@@ -571,10 +541,7 @@
 #define CONFIG_BOOTCOUNT_ALEN	1
 #define CONFIG_SYS_BOOTCOUNT_ADDR	0x9
 
-#define CONFIG_VERSION_VARIABLE
-
 #define CONFIG_IMAGE_FORMAT_LEGACY
-#define CONFIG_CMD_FDT
 #define CONFIG_CMD_HASH
 #define CONFIG_SHA1
 #define CONFIG_SHA256