X-Git-Url: http://git.ipfire.org/?p=people%2Fms%2Fu-boot.git;a=blobdiff_plain;f=include%2Fconfigs%2Fls1046ardb.h;h=3d3dfb1f8f70ae1a4531d13f82fca81cc9279981;hp=f0719ad2a16564a235be0135cbb94901686a3fec;hb=ec7483e34ea932fb68267dc0b1de30be51f271c9;hpb=97205eeab4d1a785340052657673c56f2d440db7

diff --git a/include/configs/ls1046ardb.h b/include/configs/ls1046ardb.h
index f0719ad2a1..3d3dfb1f8f 100644
--- a/include/configs/ls1046ardb.h
+++ b/include/configs/ls1046ardb.h
@@ -9,17 +9,6 @@
 
 #include "ls1046a_common.h"
 
-#if defined(CONFIG_FSL_LS_PPA)
-#define CONFIG_ARMV8_PSCI
-#define CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT
-#define CONFIG_SYS_LS_PPA_DRAM_BLOCK_MIN_SIZE		(1UL * 1024 * 1024)
-
-#define CONFIG_SYS_LS_PPA_FW_IN_XIP
-#ifdef CONFIG_SYS_LS_PPA_FW_IN_XIP
-#define	CONFIG_SYS_LS_PPA_FW_ADDR	0x40500000
-#endif
-#endif
-
 #ifdef CONFIG_SD_BOOT
 #define CONFIG_SYS_TEXT_BASE		0x82000000
 #else
@@ -45,7 +34,9 @@
 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
 #define CONFIG_FSL_DDR_BIST	/* enable built-in memory test */
+#ifndef CONFIG_SPL
 #define CONFIG_FSL_DDR_INTERACTIVE	/* Interactive debugging */
+#endif
 
 #ifdef CONFIG_RAMBOOT_PBL
 #define CONFIG_SYS_FSL_PBL_PBI board/freescale/ls1046ardb/ls1046ardb_pbi.cfg
@@ -60,16 +51,14 @@
 #endif
 #endif
 
-/* No NOR flash */
-#define CONFIG_SYS_NO_FLASH
-
+#ifndef SPL_NO_IFC
 /* IFC */
 #define CONFIG_FSL_IFC
-
 /*
  * NAND Flash Definitions
  */
 #define CONFIG_NAND_FSL_IFC
+#endif
 
 #define CONFIG_SYS_NAND_BASE		0x7e800000
 #define CONFIG_SYS_NAND_BASE_PHYS	CONFIG_SYS_NAND_BASE
@@ -106,7 +95,6 @@
 #define CONFIG_SYS_NAND_BASE_LIST	{ CONFIG_SYS_NAND_BASE }
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
 #define CONFIG_MTD_NAND_VERIFY_WRITE
-#define CONFIG_CMD_NAND
 
 #define CONFIG_SYS_NAND_BLOCK_SIZE	(128 * 1024)
 
@@ -164,34 +152,43 @@
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	5
 #define I2C_RETIMER_ADDR			0x18
 
+/* PMIC */
+#define CONFIG_POWER
+#ifdef CONFIG_POWER
+#define CONFIG_POWER_I2C
+#endif
+
 /*
  * Environment
  */
+#ifndef SPL_NO_ENV
 #define CONFIG_ENV_OVERWRITE
+#endif
 
 #if defined(CONFIG_SD_BOOT)
-#define CONFIG_ENV_IS_IN_MMC
 #define CONFIG_SYS_MMC_ENV_DEV		0
-#define CONFIG_ENV_OFFSET		(1024 * 1024)
+#define CONFIG_ENV_OFFSET		(3 * 1024 * 1024)
 #define CONFIG_ENV_SIZE			0x2000
 #else
-#define CONFIG_ENV_IS_IN_SPI_FLASH
 #define CONFIG_ENV_SIZE			0x2000		/* 8KB */
-#define CONFIG_ENV_OFFSET		0x200000	/* 2MB */
+#define CONFIG_ENV_OFFSET		0x300000	/* 3MB */
 #define CONFIG_ENV_SECT_SIZE		0x40000		/* 256KB */
 #endif
 
+#define AQR105_IRQ_MASK			0x80000000
 /* FMan */
-#ifdef CONFIG_SYS_DPAA_FMAN
-#define CONFIG_FMAN_ENET
+#ifndef SPL_NO_FMAN
+
+#ifdef CONFIG_NET
 #define CONFIG_PHYLIB
-#define CONFIG_PHYLIB_10G
 #define CONFIG_PHY_GIGE		/* Include GbE speed/duplex detection */
-
 #define CONFIG_PHY_REALTEK
-#define CONFIG_PHY_AQUANTIA
-#define AQR105_IRQ_MASK			0x80000000
+#endif
 
+#ifdef CONFIG_SYS_DPAA_FMAN
+#define CONFIG_FMAN_ENET
+#define CONFIG_PHY_AQUANTIA
+#define CONFIG_PHYLIB_10G
 #define RGMII_PHY1_ADDR			0x1
 #define RGMII_PHY2_ADDR			0x2
 
@@ -203,33 +200,34 @@
 #define CONFIG_ETHPRIME			"FM1@DTSEC3"
 #endif
 
+#endif
+
 /* QSPI device */
+#ifndef SPL_NO_QSPI
 #ifdef CONFIG_FSL_QSPI
 #define CONFIG_SPI_FLASH_SPANSION
 #define FSL_QSPI_FLASH_SIZE		(1 << 26)
 #define FSL_QSPI_FLASH_NUM		2
-#define CONFIG_SPI_FLASH_BAR
+#endif
 #endif
 
 /* USB */
+#ifndef SPL_NO_USB
 #define CONFIG_HAS_FSL_XHCI_USB
 #ifdef CONFIG_HAS_FSL_XHCI_USB
 #define CONFIG_USB_XHCI_HCD
 #define CONFIG_USB_XHCI_FSL
 #define CONFIG_USB_XHCI_DWC3
 #define CONFIG_USB_MAX_CONTROLLER_COUNT         3
-#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS      2
-#define CONFIG_CMD_USB
 #define CONFIG_USB_STORAGE
 #endif
+#endif
 
 /* SATA */
+#ifndef SPL_NO_SATA
 #define CONFIG_LIBATA
 #define CONFIG_SCSI_AHCI
 #define CONFIG_SCSI_AHCI_PLAT
-#define CONFIG_SCSI
-#define CONFIG_DOS_PARTITION
-#define CONFIG_BOARD_LATE_INIT
 
 #define CONFIG_SYS_SATA				AHCI_BASE_ADDR
 
@@ -237,13 +235,18 @@
 #define CONFIG_SYS_SCSI_MAX_LUN			1
 #define CONFIG_SYS_SCSI_MAX_DEVICE		(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
 						CONFIG_SYS_SCSI_MAX_LUN)
-#define CONFIG_BOOTCOMMAND		"sf probe 0:0;sf read $kernel_load" \
-					"$kernel_start $kernel_size;" \
-					"bootm $kernel_load"
+#endif
 
+#ifndef SPL_NO_MISC
+#undef CONFIG_BOOTCOMMAND
+#define CONFIG_BOOTCOMMAND "run distro_bootcmd; env exists secureboot"	\
+			   "&& esbc_halt; run qspi_bootcmd;"
 #define MTDPARTS_DEFAULT "mtdparts=1550000.quadspi:1m(rcw)," \
 			"15m(u-boot),48m(kernel.itb);" \
 			"7e800000.flash:16m(nand_uboot)," \
 			"48m(nand_kernel),448m(nand_free)"
+#endif
+
+#include <asm/fsl_secure_boot.h>
 
 #endif /* __LS1046ARDB_H__ */